Oracle TimesTen In-Memory Database Reference, 11g Release 2 (11.2.2)

11g Release 2 (11.2.2)

E21643-10

Contents

Title and Copyright Information

Preface

- Audience

- Related documents

- Conventions

- Documentation Accessibility

What's New

- New features in Release 11.2.2.4.0

- New features in Release 11.2.2.2.0

- New features in Release 11.2.2.1.0

1 Connection Attributes

- Required privileges for attributes

- List of Attributes

- Data store attributes

- Data Source Name

- DataStore

- DatabaseCharacterSet

- Supported character sets

- See also

- Description

- LogDir

- Preallocate

- ReplicationApplyOrdering

- ReplicationParallelism

- Temporary

- TypeMode

- First connection attributes

- AutoCreate

- CkptFrequency

- CkptLogVolume

- CkptRate

- Connections

- ForceConnect

- LogAutoTruncate

- LogBufMB

- LogBufParallelism

- LogFileSize

- LogFlushMethod

- LogPurge

- MemoryLock

- Overwrite

- PermSize

- ReceiverThreads

- RecoveryThreads

- TempSize

- General connection attributes

- ConnectionName

- DDLCommitBehavior

- DDLReplicationAction

- DDLReplicationLevel

- Diagnostics

- DuplicateBindMode

- DurableCommits

- Isolation

- LockLevel

- LockWait

- MatchLogOpts

- PermWarnThreshold

- PrivateCommands

- PWDCrypt

- QueryThreshold

- ReplicationTrack

- SQLQueryTimeout

- TempWarnThreshold

- UID and PWD

- WaitForConnect

- NLS general connection attributes

- ConnectionCharacterSet

- NLS_LENGTH_SEMANTICS

- NLS_NCHAR_CONV_EXCP

- NLS_SORT

- Supported linguistic sorts

- PL/SQL first connection attributes

- PLSQL

- PLSQL_MEMORY_ADDRESS

- PLSQL_MEMORY_SIZE

- PL/SQL general connection attributes

- PLSCOPE_SETTINGS

- PLSQL_CCFLAGS

- PLSQL_CONN_MEM_LIMIT

- PLSQL_OPTIMIZE_LEVEL

- PLSQL_TIMEOUT

- IMDB Cache first connection attributes

- CacheAWTMethod

- IMDB Cache database attributes

- CacheAWTParallelism

- CacheGridEnable

- CacheGridMsgWait

- IMDB Cache general connection attributes

- DynamicLoadEnable

- DynamicLoadErrorMode

- OracleNetServiceName

- OraclePWD

- PassThrough

- RACCallback

- TimesTen Client connection attributes

- TCP_Port

- TCP_Port2

- TTC_FailoverPortRange

- TTC_Server

- TTC_Server2

- TTC_Server_DSN

- TTC_Server_DSN2

- TTC_Timeout

- Server connection attributes

- MaxConnsPerServer

- ServersPerDSN

- ServerStackSize

2 Built-In Procedures

- ttAgingLRUConfig

- ttAgingScheduleNow

- ttApplicationContext

- ttBackupStatus

- ttBlockInfo

- ttBookmark

- ttCacheAutorefresh

- ttCacheAutorefreshStatsGet

- ttCacheAwtMonitorConfig

- ttCacheAWTThresholdGet

- ttCacheAWTThresholdSet

- ttCacheConfig

- ttCacheDbCgStatus

- ttCacheDDLTrackingConfig

- ttCachePolicyGet

- ttCachePolicySet

- ttCachePropagateFlagSet

- ttCacheSqlGet

- ttCacheStart

- ttCacheStop

- ttCacheUidGet

- ttCacheUidPwdSet

- ttCkpt

- ttCkptBlocking

- ttCkptConfig

- ttCkptHistory

- ttCompact

- ttCompactTS

- ttComputeTabSizes

- ttConfiguration

- ttContext

- ttDataStoreStatus

- ttDurableCommit

- ttGridAttach

- ttGridCheckOwner

- ttGridCreate

- ttGridDestroy

- ttGridDetach

- ttGridDetachAll

- ttGridDetachList

- ttGridGlobalCGResume

- ttGridGlobalCGSuspend

- ttGridInfo

- ttGridNameSet

- ttGridNodeStatus

- ttGridUserAssignedName

- ttHostNameGet

- ttHostNameSet

- ttIndexAdviceCaptureDrop

- ttIndexAdviceCaptureEnd

- ttIndexAdviceCaptureInfoGet

- ttIndexAdviceCaptureOutput

- ttIndexAdviceCaptureStart

- ttLoadFromOracle

- ttLockLevel

- ttLockWait

- ttLogHolds

- ttMonitorHighWaterReset

- ttOptClearStats

- ttOptCmdCacheInvalidate

- ttOptEstimateStats

- ttOptGetColStats

- ttOptGetFlag

- ttOptGetMaxCmdFreeListCnt

- ttOptGetOrder

- ttOptSetColIntvlStats

- ttOptSetColStats

- ttOptSetFlag

- ttOptSetMaxCmdFreeListCnt

- ttOptSetMaxPriCmdFreeListCnt

- ttOptSetOrder

- ttOptSetTblStats

- ttOptShowJoinOrder

- ttOptStatsExport

- ttOptUpdateStats

- ttOptUseIndex

- ttPLSQLMemoryStats

- ttRamPolicyAutoReloadGet

- ttRamPolicyAutoReloadSet

- ttRamPolicyGet

- ttRamPolicySet

- ttRedundantIndexCheck

- ttRepDeactivate

- ttReplicationStatus

- ttRepPolicyGet

- ttRepPolicySet

- ttRepQueryThresholdGet

- ttRepQueryThresholdSet

- ttRepStart

- ttRepStateGet

- ttRepStateSave

- ttRepStateSet

- ttRepStop

- ttRepSubscriberStateSet

- ttRepSubscriberWait

- ttRepSyncGet

- ttRepSyncSet

- ttRepSyncSubscriberStatus

- ttRepTransmitGet

- ttRepTransmitSet

- ttRepXactStatus

- ttRepXactTokenGet

- ttSetUserColumnID

- ttSetUserTableID

- ttSize

- ttSQLCmdCacheInfo

- ttSQLCmdCacheInfoGet

- ttSQLCmdQueryPlan

- ttTableSchemaFromOraQueryGet

- ttVersion

- ttWarnOnLowMemory

- ttXactIdGet

- ttXlaBookmarkCreate

- ttXlaBookmarkDelete

- ttXlaSubscribe

- ttXlaUnsubscribe

3 Utilities

- Overview

- Required authentication and authorization for utilities

- Required user authentication for utilities

- Required privileges for executing utilities

- ttAdmin

- ttAdoptStores

- ttBackup

- ttBulkCp

- ttCacheAdvisor

- ttCapture

- ttCheck

- ttCWAdmin

- ttDaemonAdmin

- ttDaemonLog

- ttDaemonLog for Windows

- ttDaemonLog for UNIX

- ttDestroy

- ttIsql

- ttMigrate

- ttmodinstall

- ttRepAdmin

- Help and version information

- Database information

- Subscriber database operations

- Duplicate a database

- Wait for updates to complete

- Replication status

- ttRestore

- ttSchema

- ttSize

- ttStatus

- ttSyslogCheck (UNIX)

- ttTail

- ttTraceMon

- ttuser

- ttVersion

- ttXactAdmin

- ttXactLog

4 System Limits

- System limits and defaults

- Limits on number of open files

- Path names

Index

Oracle® TimesTen In-Memory Database

Reference

11g Release 2 (11.2.2)

E21643-10

September 2012

Oracle TimesTen In-Memory Database Reference, 11g Release 2 (11.2.2)

E21643-10

Copyright © 2012, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Preface

Oracle TimesTen In-Memory Database is a memory-optimized relational database. Deployed in the application tier, Oracle TimesTen In-Memory Database operates on databases that fit entirely in physical memory using standard SQL interfaces. High availability for the in-memory database is provided through real-time transactional replication.

Audience

This document provides a reference for TimesTen attributes, built-in procedures, and utilities.This document is intended for readers with a basic understanding of database systems.

Related documents

TimesTen documentation is available on the product distribution media and on the Oracle Technology Network:

http://www.oracle.com/technetwork/products/timesten/documentation/

Conventions

TimesTen supports multiple platforms. Unless otherwise indicated, the information in this guide applies to all supported platforms. The term Windows applies to all supported Windows platforms. The term UNIX applies to all supported UNIX platforms and also to Linux. Refer to the "Platforms" section in Oracle TimesTen In-Memory Database Release Notes for specific platform versions supported by TimesTen.

Note:
In TimesTen documentation, the terms "data store" and "database" are equivalent. Both terms refer to the TimesTen database unless otherwise noted.

This document uses the following text conventions:

Convention

Meaning

italic

Italic type indicates terms defined in text, book titles, or emphasis.

monospace

Monospace type indicates code, commands, URLs, function names, attribute names, directory names, file names, text that appears on the screen, or text that you enter.

italic monospace

Italic monospace type indicates a placeholder or a variable in a code example for which you specify or use a particular value. For example:
Driver=install_dir/lib/libtten.sl

Replace install_dir with the path of your TimesTen installation directory.

[ ]

Square brackets indicate that an item in a command line is optional.

{ }

Curly braces indicated that you must choose one of the items separated by a vertical bar ( | ) in a command line.

|

A vertical bar (or pipe) separates alternative arguments.

. . .

An ellipsis (. . .) after an argument indicates that you may use more than one argument on a single command line. An ellipsis in a code example indicates that what is shown is only a partial example.

%

The percent sign indicates the UNIX shell prompt.

In addition, TimesTen documentation uses the following special conventions:

Convention

Meaning

install_dir

The path that represents the directory where TimesTen is installed.

TTinstance

The instance name for your specific installation of TimesTen. Each installation of TimesTen must be identified at installation time with a unique instance name. This name appears in the installation path.

bits or bb

Two digits, either 32 or 64, that represent either a 32-bit or 64-bit operating system.

release or rr

The first three parts in a release number with or without dots. The first three parts of a release number represent a major TimesTen release. For example, 1122 or 11.2.2 represents TimesTen 11g Release 2 (11.2.2).

DSN

TimesTen data source name (for the TimesTen database).

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

What's New

This section summarizes the new features of Oracle TimesTen In-Memory Database 11g Release 2 (11.2.2) that are documented in this guide and provides links to more information.

New features in Release 11.2.2.4.0

- In a ttRepAdmin -duplicate operation, now you can specify a local or remote IP address for the destination of the duplicate, using the options -localIP and -remoteIP. See "Duplicate a database".

- A new tool, the Index Advisor, can be used to recommend a set of indexes that could improve the performance of a specific SQL workload. The Index Advisor consists of several built-in procedures. The procedures that make up the Index Advisor are:

- ttIndexAdviceCaptureDrop

- ttIndexAdviceCaptureEnd

- ttIndexAdviceCaptureInfoGet

- ttIndexAdviceCaptureOutput

- ttIndexAdviceCaptureStart

- New tools have been added that enable you to load the results of a SQL query from a back-end Oracle database into a single table on TimesTen without creating a cache grid, cache group, and cache table to contain the results. TimesTen provides the tools that will execute a user provided SELECT statement on Oracle and load the result set into a table on TimesTen. The ttIsql utility is enhanced to include the LoadFromOracle command. In addition, two new built-in procedures are in this release as part of this feature:

- ttLoadFromOracle

- ttTableSchemaFromOraQueryGet

New features in Release 11.2.2.2.0

- The ttIsql utility now supports autovariables, showcurrenttime as a set/show attribute, the IF command, and WHENEVER error handling. See more details in the description of the ttIsql utility.

- The new Automatic parallel replication allows for the parallel replication and application of transactions changes to the receiving nodes in a replication scheme. See Chapter 1, "Connection Attributes" for more details on parallel replication.

New features in Release 11.2.2.1.0

- The ability to determine the current space usage of a table using the ttComputeTabSizes built-in procedure.

- The new Automatic parallel replication allows for the parallel replication and application of transactions changes to the receiving nodes in a replication scheme. See Chapter 1, "Connection Attributes" for more details on parallel replication.

- You can configure parallel propagation of changes in AWT cache tables to the corresponding Oracle tables. See Chapter 1, "Connection Attributes" for more details on parallel propagation.

- The maximum value of the LogBufMB and LogFileSize connection attributes has increased to 64GB on 64-bit systems.

1 Connection Attributes

The ODBC standard defines four connection attributes:

- DSN

- Driver

- UID

- PWD

For a description of the ODBC definition of these attributes, see the appropriate ODBC manual for your platform:

- Microsoft ODBC 3.0 Programmer's Reference and SDK Guide

- Microsoft ODBC 2.0 Programmer's Reference and SDK Guide

This chapter describes all the attributes defined by TimesTen. To view the names and values of most attributes specified in the connection string, an application can use the ttConfiguration built-in procedure.

Note:
According to the ODBC standard, when an attribute occurs multiple times in a connection string, the first value specified is used, not the last value.

On UNIX, False means the attribute value is set to 0 and True means the attribute value is set to 1.

On Windows, False means the check box is unchecked and True means the check box is checked.

The following sections provide details on all TimesTen attributes, which are first listed in tables in "List of Attributes". Following the tables, each attribute is described in detail.

- Required privileges for attributes

- List of Attributes

Required privileges for attributes

Only the instance administrator can change a first connection attribute to a value other than the one currently in effect. (No privileges are required to change AutoCreate and ForceConnect.)

List of Attributes

This section includes the tables:

- Table 1-1, "Data store attributes"

- Table 1-2, "First connection attributes"

- Table 1-3, "General connection attributes"

- Table 1-4, "NLS general connection attributes"

- Table 1-5, "PL/SQL first connection attributes"

- Table 1-6, "PL/SQL general connection attributes"

- Table 1-7, "IMDB Cache first connection attributes"

- Table 1-8, "IMDB Cache database attributes"

- Table 1-9, "IMDB Cache general connection attributes"

- Table 1-10, "Client connection attributes"

- Table 1-11, "Server connection attributes"

Table 1-1 Data store attributes

Name

Description

Default

Data Source Name

A name that identifies the specific attributes of a connection to the database.

None

DataStore

Identifies the physical database.

None

DatabaseCharacterSet

Identifies the character set used by the database. This attribute is required at database creation time.

None

Description

A statement that identifies the use of the data source name.

None

LogDir

The directory where transaction log files are stored.

Database directory

Preallocate

Specifies that disk space for the database should be preallocated when creating the database.

0 (False)

ReplicationApplyOrdering

Starts user-specified parallel replication.

0 (Starts automatic parallel replication)

ReplicationParallelism

Specifies the number of tracks available for user-defined parallel replication.

1

Temporary

Specifies that the database is not saved to disk.

0 (False)

TypeMode

The type mode for the database.

0 (Oracle Type Mode)

Table 1-2 First connection attributes

Name

Description

Default

AutoCreate

Specifies that the first connection creates the database if it does not exist.

1 (True)

CkptFrequency

Controls the frequency in seconds that TimesTen performs a background checkpoint.

600

CkptLogVolume

Controls the amount of data in megabytes that collects in the log between background checkpoints.

0 (Off)

CkptRate

Controls the maximum rate at which data should be written to disk during a checkpoint operation.

0 (Unlimited rate)

Connections

Indicates the upper bound on the number of user-specified concurrent connections to the database.

The lesser of 2000 or the number of semaphores specified in the SEMMSL kernel parameter.

ForceConnect

Specifies whether a connection is allowed to a failed database if it is not properly restored from the corresponding subscriber database.

0 (Connection disallowed)

LogAutoTruncate

Determines whether the first connection to a database should proceed if TimesTen recovery encounters a defective log record.

1 (Continues after log is truncated)

LogBufMB

The size of the internal log buffer in MB.

64

LogBufParallelism

The number of log buffer strands.

4

LogFileSize

The transaction log file size in MB.

64

LogFlushMethod

Controls the method used by TimesTen to write and sync log data to transaction log files.

1 (Write data to transaction log files using buffered writes. Use explicit sync operations as needed to sync log data to disk)

LogPurge

Specifies that unneeded transaction log files are deleted during a checkpoint operation.

1 (True)

MemoryLock

Allows applications that connect to a shared database to specify whether the real memory should be locked during database loading.

0 (Do not acquire a memory lock)

Overwrite

Specifies that the existing database should be overwritten with a new one when a connection is attempted.

0 (False)

PermSize

The size in MB for the permanent partition of the database.

32

ReceiverThreads

Controls the number of threads used to apply changes on the active master database to the standby master database in an active standby pair replication scheme.

1

RecoveryThreads

The number of threads used to rebuild indexes during recovery.

'1

TempSize

The size in MB for the temporary partition of the database.

The default size is determined from the PermSize value.

Table 1-3 General connection attributes

Name

Description

Default

ConnectionName

Specifies whether there is a symbolic name for the data source.

The process name

DDLCommitBehavior

Controls transactional commit behavior in relation to DDL.

0 (Oracle behavior)

DDLReplicationAction

Determines whether a table is included in an active standby pair replication scheme at table creation time when the DDLReplicationLevel connection attribute is set to 2.

INCLUDE

DDLReplicationLevel

Enables replication of DDL (Data Definition Language) statements in an active standby replication scheme.

2 (Replication of objects enabled)

Diagnostics

Specifies whether diagnostic messages are generated.

1 (Messages are generated)

DuplicateBindMode

Determines whether applications use TimesTen or Oracle parameter binding for duplicate occurrences of a parameter in a SQL statement.

0 (Oracle-style binding)

DurableCommits

Specifies that commit operations should write log records to disk.

0 (Records not written to disk)

Isolation

Specifies whether the isolation level is read committed or serializable.

1 (Read committed)

LockLevel

Specifies whether the connection should use row-level locking (value = 0) or database-level locking (value = 1).

0 (Row-level locking)

LockWait

Allows an application to configure the lock wait interval for the connection.

10 seconds

MatchLogOpts

Specifies that value used for the LogPurge attribute should match those of current connections.

0 (False)

PermWarnThreshold

The threshold at which TimesTen returns a warning and throws an SNMP trap when the permanent partition of the database is low in memory.

90%

PrivateCommands

Determines if commands are shared between connections.

0 (On)

PWD

See "UID and PWD".

Specify the password that corresponds with the specified UID. When caching Oracle data, PWD specifies the TimesTen password. You can specify the Oracle PWD in the connection string, if necessary.

None

PWDCrypt

The value of the encrypted user password.

None

QueryThreshold

Determines whether TimesTen returns a warning and throws an SNMP trap if a query times out before executing.

0 (No warning is returned)

ReplicationTrack

Assigns a connection to a replication track.

None

SQLQueryTimeout

Specifies the time limit in seconds within which the database should execute SQL statements.

0 (No timeout)

TempWarnThreshold

The threshold at which TimesTen returns a warning and throws an SNMP trap when the temporary partition of the database is low in memory.

90%

UID

See "UID and PWD".

Specify a user name that is defined on the server. When caching Oracle data, the UID must match the UID on the Oracle database that is being cached in TimesTen.

None

WaitForConnect

Specifies that the connection attempt should wait if an immediate connection is not possible.

1

Table 1-4 NLS general connection attributes

Name

Description

Default

ConnectionCharacterSet

The character encoding for the connection, which may be different from the database character set.

US7ASCII unless the database character set is TIMESTEN8, then TIMESTEN8.

NLS_LENGTH_SEMANTICS

The default length semantics configuration.

BYTE

NLS_NCHAR_CONV_EXCP

Determines whether an error is reported when there is data loss during an implicit or explicit character type conversion between NCHAR/NVARCHAR data and CHAR/VARCHAR data.

0 (False)

NLS_SORT

The collating sequence to use for linguistic comparisons.

BINARY

Table 1-5 PL/SQL first connection attributes

Name

Description

Default

PLSQL

Determines whether PL/SQL is enabled.

1 (PL/SQL is enabled)

PLSQL_MEMORY_ADDRESS

The virtual address at which the shared memory segment is loaded into each process that uses the TimesTen direct drivers.

Platform specific

PLSQL_MEMORY_SIZE

The size in megabytes of the shared memory segment used by PL/SQL.

32 MB

Table 1-6 PL/SQL general connection attributes

Name

Description

Default

PLSCOPE_SETTINGS

Controls whether the PL/SQL compiler generates cross-reference information.

IDENTIFIERS: NONE

PLSQL_CCFLAGS

Controls conditional compilation of PL/SQL units.

NULL

PLSQL_CONN_MEM_LIMIT

Specifies the maximum amount of process heap memory in MB that PL/SQL can use for this connection.

100

PLSQL_OPTIMIZE_LEVEL

The optimization level that is used to compile PL/SQL library units.

2

PLSQL_TIMEOUT

The number of seconds a PL/SQL procedure can run before being automatically terminated.

30 seconds

Table 1-7 IMDB Cache first connection attributes

Name

Description

Default

CacheAWTMethod

Enables the AWT propagation method to be used on Oracle tables.

0 (sql)

Table 1-8 IMDB Cache database attributes

Name

Description

Default

CacheAWTParallelism

Indicates the number of threads that should be used to apply changes to the Oracle database.

1

CacheGridEnable

Enables cache grid.

1 (Enabled)

CacheGridMsgWait

Sets the maximum message wait time.

60 seconds

Table 1-9 IMDB Cache general connection attributes

Name

Description

Default

DynamicLoadEnable

Enables or disables transparent load of Oracle data to dynamic cache groups.

1 (Dynamic cache group load is enabled)

DynamicLoadErrorMode

Determines if an error message is returned upon a transparent load failure.

0 (Errors are not returned)

OracleNetServiceName

The Oracle Service Name of the Oracle instance from which data is to be loaded into a TimesTen database. This attribute is only used by the cache agent. Set the OracleNetServiceName attribute to the Oracle Service Name.

None

OraclePWD

Identifies the password for the Oracle database that is being cached in TimesTen.

None

PassThrough

Specifies which SQL statements are executed locally in TimesTen and which SQL statements are passed through to Oracle for execution.

0

RACCallback

Specifies whether to enable or disable the installation of Application Failover (TAF) and Fast Application Notification (FAN) callbacks.

1 (Install the callbacks)

Table 1-10 Client connection attributes

Name

Description

Default

TCP_Port

The port number on which the server is listening.

None

TCP_Port2

The port number on which the server should listen if an automatic failover occurs.

None

TTC_FailoverPortRange

A range for the failover port numbers.

None

TTC_Server

Name of the computer where the TimesTen Server is running or a logical server name.

None

TTC_Server2

If an automatic failover occurs, the name of the computer where the TimesTen Server should be running or a logical server name.

None

TTC_Server_DSN

Server DSN corresponding to the TimesTen database.

None

TTC_Server_DSN2

Server DSN corresponding to the TimesTen database, if an automatic failover occurs.

None

TTC_Timeout

Optional. Timeout period, in seconds, for completion of a TimesTen client/server operation. The maximum timeout period is 99999 seconds.

60 seconds

Table 1-11 Server connection attributes

Name

Description

Default

MaxConnsPerServer

The maximum number of concurrent connections a child server process can handle.

1

ServersPerDSN

The desired number of server processes for the DSN.

1

ServerStackSize

The size in KB of the thread stack for each connection.

128 KB (32-bit systems)

256KB (64-bit systems)

Data store attributes

Data store attributes are set at data store creation time.The data store attributes are listed in Table 1-1, "Data store attributes" and described in detail in this section.

These attributes can be assigned values only during database creation by the instance administrator.

Data Source Name

The data source name uniquely identifies the attributes to a connection. It serves two purposes:

- As a unique identifier to the ODBC driver manager (if one is present), allowing it to associate a Data Store Name with a specific ODBC driver.

- As one of potentially many name aliases to a single physical database where the name alias has unique attributes associated with it.

The database attributes can apply to either the data source name (connection to a database) or the Data Store Path Name (database).

On Windows, the data source name and all configuration information associated with the data source (including the database path name) are stored in the system registry. This information is used by the ODBC driver manager and by TimesTen.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set Data Source Name as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DSN

A name that describes the DSN.

Windows ODBC Data Source Administrator

Data Source Name field

A name that describes the DSN.

DataStore

The database path name uniquely identifies the physical database. It is the full path name of the database and the file name prefix, for example: C:\data\AdminData. This name is not a file name. The actual database file names have suffixes, such as .ds0 and .log0, for example C:\data\AdminData.ds0 and C:\data\AdminData.log0.

You can use environment variables in the specification of the database path and name.

Note:
You are required to specify the database path and name at database creation time. It cannot be altered after the database has been created.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set DataStore as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DataStore

Full path to the physical database that the data source name references.

Windows ODBC Data Source Administrator

Data Store Path + Name field

Full path to the physical database that the data source name references.

DatabaseCharacterSet

The database character set determines the character set in which data is stored.

Note:
You are required to specify the database character set at database creation time only. It cannot be altered after the database has been created. If you do not specify a value for this attribute when creating a database, TimesTen returns error message 12701.

Generally, your database character set should be chosen based on the data requirements. For example: Do you have data in Unicode or is your data in Japanese on UNIX (EUC) or Windows (SJIS)?

You should choose a connection character set that matches your terminal settings or data source. See "ConnectionCharacterSet".

When the database and connection character sets differ, TimesTen performs the data conversion internally based on the connection character set. If the connection and database character sets are the same, TimesTen does not need to convert or interpret the data set. Best performance occurs when connection and database character sets match, since no conversion is required.

To use this attribute you must specify a supported character set. For a list of character set names that can be used as a value for this attribute, see "Supported character sets" below.

There are several things to consider when choosing a character set for your database. For a discussion about these considerations, see "Choosing a database character set" in Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set DatabaseCharacterSet name as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DatabaseCharacterSet

Specify the preferred character set.

Windows ODBC Data Source Administrator

Database Character Set list

Select the preferred character set from the list provided in the ODBC Data Source Administrator.

Supported character sets

The tables in this section describe the character sets supported in TimesTen.

Asian character sets

Name

Description

JA16EUC

EUC 24-bit Japanese

JA16EUCTILDE

The same as JA16EUC except for the way that the wave dash and the tilde are mapped to and from Unicode

JA16SJIS

Shift-JIS 16-bit Japanese

JA16SJISTILDE

The same as JA16SJIS except for the way that the wave dash and the tilde are mapped to and from Unicode

KO16KSC5601

KSC5601 16-bit Korean

KO16MSWIN949

Microsoft Windows Code Page 949 Korean

TH8TISASCII

Thai Industrial Standard 620-2533 - ASCII 8-bit

VN8MSWIN1258

Microsoft Windows Code Page 1258 8-bit Vietnamese

ZHS16CGB231280

CGB2312-80 16-bit Simplified Chinese

ZHS16GBK

GBK 16-bit Simplified Chinese

ZHS32GB18030

GB18030-2000

ZHT16BIG5

BIG5 16-bit Traditional Chinese

ZHT16HKSCS

Microsoft Windows Code Page 950 with Hong Kong Supplementary Character Set HKSCS-2001. Character set conversion to and from Unicode is based on Unicode 3.0.

ZHT16MSWIN950

Microsoft Windows Code Page 950 Traditional Chinese

ZHT32EUC

EUC 32-bit Traditional Chinese

European character sets

Name

Description

BLT8CP921

Latvian Standard LVS8-92(1) Windows/UNIX 8-bit Baltic

BLT8ISO8859P13

ISO 8859-13 Baltic

BLT8MSWIN1257

Microsoft Windows Code Page 1257 8-bit Baltic

BLT8PC775

IBM-PC Code Page 775 8-bit Baltic

CEL8ISO8859P14

ISO 8859-13 Celtic

CL8ISO8859P5

ISO 8859-5 Latin/Cyrillic

CL8KOI8R

RELCOM Internet Standard 8-bit Latin/Cyrillic

CL8KOI8U

KOI8 Ukrainian Cyrillic

CL8MSWIN1251

Microsoft Windows Code Page 1251 8-bit Latin/Cyrillic

EE8ISO8859P2

ISO 8859-2 East European

EL8ISO8859P7

ISO 8859-7 Latin/Greek

ET8MSWIN923

Microsoft Windows Code Page 923 8-bit Estonian

EE8MSWIN1250

Microsoft Windows Code Page 1250 8-bit East European

EL8MSWIN1253

Microsoft Windows Code Page 1253 8-bit Latin/Greek

EL8PC737

IBM-PC Code Page 737 8-bit Greek/Latin

EE8PC852

IBM-PC Code Page 852 8-bit East European

LT8MSWIN921

Microsoft Windows Code Page 921 8-bit Lithuanian

NE8ISO8859P10

ISO 8859-10 North European

NEE8ISO8859P4

ISO 8859-4 North and North-East European

RU8PC866

IBM-PC Code Page 866 8-bit Latin/Cyrillic

SE8ISO8859P3

ISO 8859-3 South European

US7ASCII

ASCII 7-bit American

US8PC437

IBM-PC Code Page 437 8-bit American

WE8ISO8859P1

ISO 8859-1 West European

WE8ISO8859P15

ISO 8859-15 West European

WE8MSWIN1252

Microsoft Windows Code Page 1252 8-bit West European

WE8PC850

IBM-PC Code Page 850 8-bit West European

WE8PC858

IBM-PC Code Page 858 8-bit West European

Middle Eastern character sets

Name

Description

AR8ADOS720

Arabic MS-DOS 720 Server 8-bit Latin/Arabic

AR8ASMO8X

ASMO Extended 708 8-bit Latin/Arabic

AR8ISO8859P6

ISO 8859-6 Latin/Arabic

AR8MSWIN1256

Microsoft Windows Code Page 1256 8-Bit Latin/Arabic

AZ8ISO8859P9E

ISO 8859-9 Latin Azerbaijani

IW8ISO8859P8

ISO 8859-8 Latin/Hebrew

IW8MSWIN1255

Microsoft Windows Code Page 1255 8-bit Latin/Hebrew

TR8MSWIN1254

Microsoft Windows Code Page 1254 8-bit Turkish

TR8PC857

IBM-PC Code Page 857 8-bit Turkish

WE8ISO8859P9

ISO 8859-9 West European & Turkish

TimesTen character set

Name

Description

TIMESTEN8

TimesTen legacy character semantics

Universal character sets

Name

Description

AL16UTF16

Unicode 4.0 UTF-16 Universal character set. This is the implicit TimesTen national character set.

AL32UTF8

Unicode 4.0 UTF-8 Universal character set

UTF8

Unicode 3.0 UTF-8 Universal character set, CESU-8 compliant

See also

ConnectionCharacterSet

Description

Optionally, set this attribute to help you identify the Data Source Name (DSN) and its attributes.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set Description as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

Description

Text description of the Data Source Name. This attribute is optional.

Windows ODBC Data Source Administrator

Description field

Text description of the Data Source Name. This attribute is optional.

LogDir

The LogDir attribute specifies the directory where database logs reside. Specifying this attribute allows you to place the transaction log files on a different I/O path from the database checkpoint files. This may improve throughput.

You can use environment variables in the specification of the transaction log file path name. For example, you can specify $HOME/AdminDS for the location of the database. See "Using environment variables in database path names" in Oracle TimesTen In-Memory Database Operations Guide for more information.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set LogDir as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LogDir

Specifies the directory where transaction log files reside.

Windows ODBC Data Source Administrator

Transaction Log Directory field

Specifies the directory where transaction log files reside.

Preallocate

The Preallocate attribute determines whether TimesTen preallocates file system space for the database when the database is created. Setting this attribute ensures that there is sufficient space for the database when the database is saved to the file system.

Using Preallocate=1 in combination with ttRestore or ttRepAdmin -duplicate and a value of PermSize that does not match the value of PermSize of the original database may result in two checkpoint files with different sizes. This has not been shown to have negative effects. However, the issue can be avoided completely either by using the same PermSize as the original database or by setting Preallocate=0.

When a duplicate operation is carried out, the duplicated store has behavior consistent with a Preallocate setting of 0, even if it is set to 1 on the original or duplicated database. The behavior is indicated by the size of the checkpoint files, which is the sum of the size of the data and size of the database header.

The checkpoint files are subsequently allowed to grow to the same size as checkpoint files on the master database (PermSize + database header), but the space is not preallocated. The checkpoint files increase in size as data is added.

The reason for this behavior is that PreAllocate is set at database creation time. It is not a first connection attribute. The duplicate operation is not a database creation operation, so the preallocate attribute is not honored.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set Preallocate as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

Preallocate

0 (default) - Does not preallocate file system space for database when creating the database.
1 - Preallocates file system space for the database.

Windows ODBC Data Source Administrator

Preallocate check box

unchecked (default) - Does not preallocate file system space for database when creating the database.
checked - Preallocates file system space for the database.

Note:
reallocating disk space for a large database is very time consuming.

ReplicationApplyOrdering

Enables automatic or user-define track-based parallel replication when used with the ReplicationParallelism attribute. By default, this attribute is set to enable automatic parallel replication.

Both automatic and user-defined parallel replication are available for active standby pair and regular replication schemes. In parallel replication multiple transmitters send from the master to multiple receivers on the subscriber.

All data stores in the replication scheme must use the same setting.

For applications that have very predictable transactional dependencies and do not require that the commit order on the receiver is the same as that on the originating database, you can increase replication throughput by using user-defined parallel replication: you can specify the number of transaction tracks and apply specific transactions to each track. All tracks are read, transmitted and applied in parallel.

For more details on configuring user-defined automatic parallel replication, see the Oracle TimesTen In-Memory Database Replication Guide.

This attribute is also sets parallel propagation for AWT cache groups. By default, this attribute enables parallel propagation of updates to Oracle. To learn more about parallel AWT caching, see "Configuring parallel propagation to Oracle tables" in the Oracle In-Memory Database Cache User's Guide.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set ReplicationApplyOrdering as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ReplicationApplyOrdering

0 - Specifies automatic parallel replication. (default)
1 -Specifies user-defined track-based parallel replication.

Windows ODBC Data Source Administrator

Replication Apply Ordering check box

unchecked - Specifies automatic parallel replication. (default)
checked - Specifies user-defined track-based parallel replication.

ReplicationParallelism

This attribute specifies the number of tracks, or the number of transmitter/receiver pairs, used for parallel replication.

The default value for this attribute is 1. This value indicates that single-threaded replication occurs. If the value is greater than 1, the LogBufParallelism first connection attribute must be an integral multiple of ReplicationParallelism.

To configure parallel replication, set this attribute to a value from 2 to 32, indicating the number of transmitter/receiver pairs.

Restrictions and things to consider when specifying parallel replication include:

- When parallel replication is enabled the Description column of the ttLogHolds built-in procedure displays one row per track per subscriber node.

- We recommend setting the value of this attribute to a value no greater than half the value of the LogBufParallelism attribute. If you specify more replication tracks than log buffer threads, some of the replication tracks can remain empty.

- Synchronous replication, including TWOSAFE and RETURN RECEIPT replication, is not supported with user-specified parallel replication.

To learn more about parallel replication, see "Configuring parallel replication" in the Oracle TimesTen In-Memory Database Replication Guide.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set ReplicationParallelism as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ReplicationParallelism

n - A value between 1 and 32, indicating the number of tracks to replicate in parallel. The default is 1, single-threaded replication.

Windows ODBC Data Source Administrator

Replication Parallelism field

n - A value between 1 and 32, indicating the number of tracks to replicate in parallel. The default is 1, single-threaded replication.

Temporary

Set this attribute to create a temporary database. Temporary databases are not saved to the file system. They may, however, be shared and therefore require a data store path name. A temporary database is deleted when the last connection is closed. See "Database persistence" in Oracle TimesTen In-Memory Database Operations Guide for more information. You cannot assign the Temporary data store attribute to an existing permanent database.

Note:
You cannot back up or replicate a temporary database.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set Temporary as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

Temporary

0 (default) - Creates permanent database.
1 - Creates temporary database.

Windows ODBC Data Source Administrator

Temporary check box

unchecked (default) - Creates permanent database.
checked - Creates temporary database.

TypeMode

Specifies whether the names and semantics of the data types follow Oracle or TimesTen type rules. TimesTen supports both Oracle and TimesTen data types. The type mode determines what names are used to specify each data type. In some cases, a data type has both an alias name and a fixed type name. In such a situation, you can use either name. The TimesTen type mode is included for backward compatibility. We recommend that you use the default setting, which is Oracle type mode.

When caching Oracle data in TimesTen, TypeMode must be set to 0.

See "Type specifications" in Oracle TimesTen In-Memory Database SQL Reference for a list of data types and their fixed and alias names.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set TypeMode as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TypeMode

0 (default) - Oracle type mode.
1 - TimesTen type mode.

If no value is specified, either the default type mode or the type mode assigned when the database was created is used.

Windows ODBC Data Source Administrator

TypeMode dropdown list

0 (default) - Oracle type mode.
1 - TimesTen type mode.

If no value is specified, either the default type mode or the type mode assigned when the database was created is used.

First connection attributes

First connection attributes are set when a connection is made to an idle database (a database created by the instance administrator which currently has no connections) and persist for that connection and all subsequent connections until the last connection to this database is closed.

First connection attributes are listed in Table 1-2, "First connection attributes" and described in detail in this section.

If you try to connect to the database using attributes that are different from the first connection attribute settings, the new connection may be rejected or the attribute value may be ignored. However, for example, if existing connections have a LogFileSize of one size and a new connection specifies a LogFileSize of another size, TimesTen ignores the new value and returns a warning.

Note:
Only the instance administrator can change a first connection attribute to a value other than the one currently in effect. To change the value of a first connection attribute, you must first shut down the database and then connect with ADMIN privileges. (No privileges are required to change AutoCreate and ForceConnect.)

AutoCreate

If you connect to a database that has the AutoCreate attribute set and the database does not exist yet, the database is created automatically if you supplied a valid existing path. With AutoCreate set, TimesTen creates the database, but not the path to the database. If you attempt to connect to a database that does not exist and the AutoCreate attribute is not set, the connection fails.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set AutoCreate as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

AutoCreate

0 - Does not create new database if database does not exist.
1 (default) - Creates new database if the specified database does not exist.

Windows ODBC Data Source Administrator

AutoCreate check box

unchecked - Does not create new database if database does not exist.
checked (default) - Creates new database if database does not exist.

CkptFrequency

Controls the frequency in seconds that TimesTen performs a background checkpoint. The counter used for the checkpoint condition is reset at the beginning of each checkpoint.

If both CkptFrequency and CkptLogVolume attributes have a value greater than 0, a checkpoint is performed when either of the two conditions becomes true. The values set by the ttCkptConfig built-in procedure replace the values set by these attributes.

In the case that your application attempts to perform a checkpoint operation while a background checkpoint is in process, TimesTen waits until the background checkpoint finishes and then executes the application's checkpoint. To turn off background checkpointing, set CkptFrequency=0 and CkptLogVolume=0.

The value of this attribute is "sticky" as it persists across database loads and unloads unless it is explicitly changed. The default value is only used during database creation. Subsequent first connections default to using the existing value stored in the database. If left unspecified (or empty in the Windows ODBC Data Source Administrator), the stored setting is used. To turn the attribute off, you must explicitly specify a value of 0.

Regardless of the value of this attribute, if a checkpoint fails, TimesTen attempts a checkpoint only once every 10 minutes. If a checkpoint failure occurs due to a lack of file system space, we recommend that you attempt a manual checkpoint as soon as space is available. Once any successful checkpoint occurs, background checkpointing reverts to the configured schedule.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set CkptFrequency as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

CkptFrequency

Enter a value in seconds for the frequency at which TimesTen should perform a background checkpoint. Default is 600. To specify the default or "existing" value, leave the value empty. A value of 0 means that checkpoint frequency is not considered when scheduling checkpoints.

Windows ODBC Data Source Administrator

Ckpt Frequency (secs) field

Enter a value in seconds for the frequency at which TimesTen should perform a background checkpoint. Default is 600. To specify the default or "existing" value, leave the field empty. A value of 0 means that checkpoint frequency is not considered when scheduling checkpoints.

CkptLogVolume

Controls the amount of data in megabytes that collects in the log between background checkpoints. The counter used for the checkpoint condition is reset at the beginning of each checkpoint.

If both CkptFrequency and CkptLogVolume attributes have a value greater than 0, a checkpoint is performed when either of the two conditions becomes true. The values set by the ttCkptConfig built-in procedure replace the values set by these attributes.

In the case that your application attempts to perform a checkpoint operation while a background checkpoint is in process, TimesTen waits until the background checkpoint finishes and then executes the application's checkpoint. To turn off background checkpointing, set CkptFrequency=0 and CkptLogVolume=0.

The value of this attribute is "sticky" as it persists across database loads and unloads unless it is explicitly changed. The default value is only used during database creation. Subsequent first connections default to using the existing value stored in the database. If left unspecified (or empty in the Windows ODBC Data Source Administrator), the stored setting is used. To turn the attribute off, you must explicitly specify a value of 0.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set CkptLogVolume as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

CkptLogVolume

Specify the amount of data in megabytes that can accumulate in the transaction log file between background checkpoints. The default is 0. To specify the default or "existing" value, leave the value empty. A value of 0 means that log volume is not considered when scheduling checkpoints.

Windows ODBC Data Source Administrator

Ckpt LogVolume field

Specify the amount of data in megabytes that can accumulate in the transaction log file between background checkpoints. The default is 0. To specify the default or "existing" value, leave the field empty. A value of 0 means that log volume is not considered when scheduling checkpoints.

CkptRate

Controls the maximum rate at which data should be written to disk during a checkpoint operation. This may be useful when the writing of checkpoints to disk interferes with other applications.

This rate is used by all background checkpoints and by checkpoints initiated by the ttCkpt and ttCkptBlocking built-in procedures. Foreground checkpoints (checkpoints taken during first connect and last disconnect) do not use this rate. The rate is specified in MB per second.

A value of 0 disables rate limitation. This is the default. The value can also be specified using the ttCkptConfig built-in procedure. The value set by the ttCkptConfig built-in procedure replaces the value set by this attribute.

The value of this attribute is "sticky" as it persists across database loads and unloads unless it is explicitly changed. The default value is only used during database creation. Subsequent first connections default to using the existing value stored in the database. If left unspecified (or empty in the Windows ODBC Data Source Administrator), the stored setting is used. To turn the attribute off, you must explicitly specify a value of 0. For existing databases that are migrated to this release, the value is initialized to 0. To use the current or default value, the attribute value should be left unspecified.

For more details about the benefits of and issues when using CkptRate, see "Setting the checkpoint rate" in Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set CkptRate as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

CkptRate

Specify the maximum rate in MB per second at which a checkpoint should be written to disk. A value of 0 indicates that the rate should not be limited. This is the default.

Windows ODBC Data Source Administrator

CkptRate field

Specify the maximum rate in MB per second at which a checkpoint should be written to disk. A value of 0 indicates that the rate should not be limited. This is the default.

Connections

Indicates the upper bound on the number of user-specified concurrent connections to the database. TimesTen allocates one semaphore for each expected connection. If the number of connections exceeds the value of this attribute, TimesTen returns an error.

The number of current connections to a database can be determined by viewing the output from the ttStatus utility.

A Connections value of 0 or no value indicates that the default number of semaphores should be used. The maximum number of connections allowed is 2047. TimesTen reserves 47 connections for internal use, leaving a maximum of 2000 connections available to applications. As a guideline, set this value to the maximum number of expected application connections plus ten percent.

If you receive an error indicating that the number of connections exceeds the value of this attribute, increase the value until you no longer receive this error.

Note:
The kernel must be configured with enough semaphores to handle all active databases. For details on setting semaphores for your system, see "Installation prerequisites" in Oracle TimesTen In-Memory Database Installation Guide.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set Connections as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

Connections

0 or no value - Indicates that the default value is used.
The default value is the lesser of 2000 or the number of semaphores specified in the SEMMSL kernel parameter.

An integer from 1 through 2000 -The value represents the maximum number of connections.

Windows ODBC Data Source Administrator

Connections field

0 or no value - Indicates that the default value is used.
The default value is the lesser of 2000 or the number of semaphores specified in the SEMMSL kernel parameter.

An integer from 1 through 2000 -The value represents the maximum number of connections.

ForceConnect

When return receipt replication is used with the NONDURABLE TRANSMIT option, a failed master database is allowed to recover only by restoring its state from a subscriber database using the -duplicate option of the ttRepAdmin utility. In other words, the failed database cannot just come up and have replication bring it up to date because it may lose some transactions that were transmitted to the subscriber but not durably committed locally. The ForceConnect connection attribute overrides this restriction.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set ForceConnect as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ForceConnect

0 (default) - Do not allow connection to failed database if it is not properly restored from the corresponding subscriber database.
1 - Allow connection to a failed database even if it is not properly restored from the corresponding subscriber database.

Windows ODBC Data Source Administrator

ForceConnect check box

unchecked (default) - Do not allow connection to failed database if it is not properly restored from the corresponding subscriber database.
checked - Allow connection to a failed database even if it is not properly restored from the corresponding subscriber database.

LogAutoTruncate

Determines whether the first connection to the database should proceed if TimesTen recovery encounters a defective log record.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set LogAutoTruncate as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LogAutoTruncate

0 - If a defective log record is encountered, terminate recovery and return an error to the connecting application. Checkpoint and transaction log files remain unmodified.
1 (default) - If a defective log record is encountered, truncate the log at the defective record's location and continue with recovery. The original transaction log files are moved to a directory called savedLogFiles, which is created as a subdirectory of the log directory. The transaction log files are saved for diagnostic purposes.

Windows ODBC Data Source Administrator

LogAutoTruncate box

unchecked - If a defective log record is encountered, terminate recovery and return an error to the connecting application. Checkpoint and transaction log files remain unmodified.
checked (default) - If a defective log record is encountered, truncate the log at the defective record's location and continue with recovery. The original transaction log files are moved to a directory called savedLogFiles, which is created as a subdirectory of the log directory. The transaction log files are saved for diagnostic purposes.

LogBufMB

The LogBufMB attribute specifies the size of the internal transaction log buffer in megabytes. The default log buffer size is 64 megabytes.

If you change the value of LogBufMB, you also may need to change the value of LogBufParallelism to satisfy the constraint that LogBufMB/LogBufParallelism >=8.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set LogBufMB as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LogBufMB

n - Size of log buffer in megabytes.
If not set and the database exists, the existing value stored in the database is used.If not set and the database is being created, the default value of 64 is used.

On 32-bit systems, the maximum log file is 1042 MB (1 GB).

On 64-bit systems, the maximum value is 65,536 MB (64 GB).

Windows ODBC Data Source Administrator

Log Buffer Size (MB) field

Size of log buffer, in megabytes.
If not set and the database exists, the existing value stored in the database is used.If not set and the database is being created, the default value of 64 is used.

On 32-bit systems, the maximum log file is 1042 MB (1 GB).

On 64-bit systems, the maximum value is 65,536 MB (64 GB).

LogBufParallelism

The LogBufParallelism attribute specifies the number of transaction log buffer strands to which TimesTen writes log files before the log is written to disk, allowing for improved log performance. Each buffer has its own insertion latch. Records are inserted in any of the strands. The log flusher gathers records from all strands and writes them to the log files.

The maximum number of strands is 64. The default is 4.

If you change the value of LogBufParallelism, you also may need to change the value of LogBufMB to satisfy the constraint that LogBufMB/LogBufParallelism >=8.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set LogBufParallelism as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LogBufParallelism

An integer value between 1 and 64. Default is 4.

Windows ODBC Data Source Administrator

Log Buffer Parallelism field

An integer value between 1 and 64. Default is 4.

LogFileSize

The LogFileSize attribute specifies the maximum size of transaction log files in megabytes. The minimum value is 8 MB. The default value is 64 MB. If you specify a size smaller than 8 MB, TimesTen returns an error message. Before TimesTen release 11.2.1.4, the minimum size was 1MB. If you created your database in a previous release of TimesTen and specified a log file size of less than 8 MB, you must increase the value assigned to this attribute to avoid an error.

Actual transaction log file sizes may be slightly smaller or larger than LogFileSize because log records cannot span transaction log files.

A value of zero indicates that either the default transaction log file size should be used if the database does not exist, or that the transaction log file size in effect for the most recent connection should be used if the database does exist.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set LogFileSize as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LogFileSize

n - Size of transaction log file in megabytes. Default is 64 when the database is created and 0 (current size in effect) on subsequent connections. The minimum size is 8 MB.
On 32-bit systems, the maximum log file is 1042 MB (1 GB).

On 64-bit systems, the maximum value is 65,536 MB (64 GB).

Windows ODBC Data Source Administrator

Log files Size (MB) field

Size of transaction log file in megabytes. Default is 64 when the database is created and 0 (current size in effect) on subsequent connections. The minimum size is 8 MB.
On 32-bit systems, the maximum log file is 1042 MB (1 GB).

On 64-bit systems, the maximum value is 65,536 MB (64 GB).

LogFlushMethod

Controls the method used by TimesTen to write and sync log data to transaction log files. The overall throughput of a system can be significantly affected by the value of this attribute, especially if the application chooses to commit most transactions durably.

As a general rule, use the value 2 if most of your transactions commit durably and use the value 1 otherwise.

For best results, however, experiment with both values using a typical workload for your application and platform. Although application performance may be affected by this attribute, transaction durability is not affected. Changing the value of this attribute does not affect transaction durability in any way.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set LogFlushMethod as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LogFlushMethod

0 - Write data to the transaction log files using the previously used value.
1 (default) - Write data to transaction log files using buffered writes and use explicit sync operations as needed to sync log data to disk (for example with durable commits).

2 - Write data to transaction log files using synchronous writes such that explicit sync operations are not needed.

Windows ODBC Data Source Administrator

Log Flush Method dropdown list

0 - Write data to the transaction log files using the previously used value.
1 (default) - Write data to transaction log files using buffered writes and use explicit sync operations as needed to sync log data to disk (for example with durable commits).

2 - Write data to transaction log files using synchronous writes such that explicit sync operations are not needed.

See also

DurableCommits

LogPurge

If the LogPurge attribute is set, TimesTen automatically removes transaction log files when they have been written to both checkpoint files and there are no transactions that still need the transaction log files' contents. The first time checkpoint is called, the contents of the transaction log files are written to one of the checkpoint files. When checkpoint is called the second time, TimesTen writes the contents of the transaction log files to the other checkpoint file.

TimesTen purges the transaction log files if all these conditions are met:

- The contents of the transaction log files have been written to both checkpoint files.

- The transaction log files are not pending incremental backup.

- If replication is being used, the transaction log files have been replicated to all subscribers.

- If XLA is being used, all XLA bookmarks have advanced beyond the transaction log files.

- The transaction log files are not being used by any distributed transactions using the XA interface.

If this attribute is set to 0 or unchecked, unneeded transaction log files are appended with the.arch suffix. Applications can then delete the files.

See also MatchLogOpts.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set LogPurge as follows:

Where to set the attributes

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LogPurge

0 - Does not remove old transaction log files at connect and checkpoint.
1 (default) - Removes old transaction log files at connect and checkpoint.

Windows ODBC Data Source Administrator

LogPurge check box

unchecked - Does not remove old transaction log files at connect and checkpoint.
checked (default) - Removes old transaction log files at connect and checkpoint.

MemoryLock

On Solaris, Linux and Windows 64-bit systems, TimesTen allows applications that connect to a shared database to specify whether the real memory should be locked while the database is being loaded into memory or while the store is in memory. If the physical memory used for the database is locked, the operating system's virtual memory sub-system cannot borrow that memory for other uses. No part of the database is ever paged out but this could lead to memory shortages in a system that is under configured with RAM. While memory locking can improve database load performance, it may impede other applications on the same computer.

On AIX the MemoryLock attribute is not implemented. The shared memory segment is locked when you use large pages, on AIX. You can lock the shared segment by using large pages. The Oracle TimesTen In-Memory Database Installation Guide contains more details about large pages.

The PL/SQL shared memory segment is not subject to MemoryLock.

Required privilege

Only the instance administrator can change the value of this attribute.

On Linux systems, set the groupname in the MemLock setting to be the same as the instance administrator in the /etc/security/limits.conf file. Set the value of MemLock to be at least as large as the TimesTen database shared memory segment.

On Solaris systems, the instance administrator must be root to set MemoryLock to 1 or 2. Setting MemoryLock to 3 or 4 enables use of Solaris "intimate shared memory".

Setting

Set MemoryLock as follows.

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

MemoryLock

0 (default) - Does not lock memory.
1 - Tries to obtain a memory lock. If unable to lock, the connection succeeds. If a lock is obtained, it is released after the database is loaded into memory (recommended).

2 - A memory lock is required. If unable to lock, the connection fails. If a lock is obtained, the connection succeeds and the lock is released after the database is loaded into memory.

3 - Tries to obtain and keep a memory lock. If unable to lock, the connection succeeds. If a memory lock is obtained, the connection succeeds and the memory lock is held until the database is unloaded from memory.

4 - A memory lock is required and is held until the database is unloaded from memory. If unable to lock, the connection fails. If a lock is obtained, the connection succeeds and the memory lock is held until the database is unloaded from memory.

Windows ODBC Data Source Administrator

Memory Lock field

0 (default) - Does not lock memory.
1 - Tries to obtain a memory lock. If unable to lock, the connection succeeds. If a lock is obtained, it is released after the database is loaded into memory (recommended).

2 - A memory lock is required. If unable to lock, the connection fails. If a lock is obtained, the connection succeeds and the lock is released after the database is loaded into memory.

3 - Tries to obtain and keep a memory lock. If unable to lock, the connection succeeds. If a memory lock is obtained, the connection succeeds and the memory lock is held until the database is unloaded from memory.

4 - A memory lock is required and is held until the database is unloaded from memory. If unable to lock, the connection fails. If a lock is obtained, the connection succeeds and the memory lock is held until the database is unloaded from memory.

Overwrite

If the Overwrite attribute is set and there is an existing database with the same database path name as the new database, TimesTen destroys the existing database and creates a new empty database, as long as the existing database is not in use. If the Overwrite attribute is set and there is not a database with the specified database path name, TimesTen only creates a new database if the AutoCreate attribute is also set (see "AutoCreate"). Overwrite is ignored if AutoCreate is set to 0. Applications should use caution when specifying the Overwrite =1 attribute.

Required privilege

Only the instance administrator can change the value of this attribute. If a user other than an instance administrator attempts to connect to a database with Overwrite=1, TimesTen returns an error.

Setting

Set Overwrite as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

Overwrite

0 (default) - Does not overwrite existing database with the same path name.
1 - Overwrites existing database with the same path name.

Windows ODBC Data Source Administrator

Not available

Not available

PermSize

Indicates the size in MB of the permanent memory region for the database. You may increase PermSize at first connect but not decrease it. TimesTen returns a warning if you attempt to decrease the permanent memory region size. If the database does not exist, a PermSize value of 0 or no value indicates that the default size should be used. Default size is 32 MB. For an existing database, a value of 0 or no value indicates that the existing size should not be changed.

Once you have created a database, you can make the permanent partition larger, but not smaller. See "Specifying the size of a database" in Oracle TimesTen In-Memory Database Operations Guide.

The ttMigrate and ttDestroy utilities can also be used to change the Permanent Data Size, when appropriate.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set PermSize as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PermSize

n - Size of permanent partition of the database, in megabytes; default is 32 MB for both 32-bit systems and 64-bit systems. Minimum size is 32 MB.

Windows ODBC Data Source Administrator

Permanent Data Size field

n - Size of permanent partition of the database, in megabytes; default is 32 MB for both 32-bit systems and 64-bit systems. Minimum size is 32 MB.

ReceiverThreads

This attribute controls the number of threads used to apply changes on the active master database to the standby master database in an active standby pair replication scheme. The default is 1. You can also set this attribute on one or more read-only subscribers in an active standby pair replication scheme to increase replication throughput from the standby master database to the subscribers.

By default, a receiver thread in the replication agent applies the changes to the standby master database. When this attribute is set to 2, an additional thread applies the changes. Databases must be hosted on systems that have two cores (or hardware threads) or more to take advantage of setting this attribute to 2.

If you set this attribute to 2 on the standby master database, you should also set it to 2 on the active master database to maintain increased throughput if there is a failover.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set ReceiverThreads as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ReceiverThreads

n - The number of threads used to apply changes from the active master database to the standby master database. You can also set this attribute on one or more read-only subscribers in an active standby pair replication scheme to increase replication throughput from the standby master database to the subscribers.
The possible values are 1 and 2. Default is 1.

Windows ODBC Data Source Administrator

ReceiverThreads field

n - The number of threads used to apply changes from the active master database to the standby master database. You can also set this attribute on one or more read-only subscribers in an active standby pair replication scheme to increase replication throughput from the standby master database to the subscribers.
The possible values are 1 and 2. Default is 1.

RecoveryThreads

The RecoveryThreads attribute determines the number of threads used to rebuild indexes during recovery.

If RecoveryThreads=1, during recovery, indexes that must be rebuilt are done serially. If you have enough processors available to work on index rebuilds on your computer, setting this attribute to a number greater than 1 can improve recovery performance. The performance improvement occurs only if different processors can work on different indexes. There is no parallelism in index rebuild within the same index.

The value of RecoveryThreads can be any value up to the number of CPUs available on your system.

The default is 1 when the database is created. Upon subsequent connections, if the database must be recovered and RecoveryThreads is unspecified or has a value of 0, then TimesTen uses the previous setting for this attribute.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set RecoveryThreads as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

RecoveryThreads

n - The number of threads to use when rebuilding indexes during recovery. Default is 1 when the database is created and 0 on subsequent connections.

Windows ODBC Data Source Administrator

RecoveryThreads field

n - The number of threads to use when rebuilding indexes during recovery. Default is 1 when the database is created and 0 on subsequent connections.

Notes

For a progress report on the recovery process, see the rebuild messages in the support log.

Set the number of threads low enough to leave sufficient resources on the server for other services/processes.

TempSize

TempSize indicates the total amount of memory in MB allocated to the temporary region.

TempSize has no predefined value. If left unspecified, its value is determined from PermSize as follows:

- If PermSize is less than 64MB, TempSize = 32 MB + ceiling(PermSize / 4 MB).

- Otherwise, Tempsize = 40 MB + ceiling(PermSize / 8 MB).

TimesTen rounds the value up to the nearest MB.

If specified, TimesTen always honors the TempSize value. Since the temporary data partition is recreated each time a database is loaded, the TempSize attribute may be increased or decreased each time a database is loaded. For an existing database, a value of 0 or no value indicates that the existing size should not be changed. The minimum TempSize is 32 MB.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set TempSize as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TempSize

n - Size of temporary partition of the database, in megabytes. Minimum size is 32 MB on all platforms.

Windows ODBC Data Source Administrator

Temporary Data Size field

n - Size of temporary partition of the database, in megabytes. Minimum size is 32 MB on all platforms.

General connection attributes

General connection attributes are set by each connection and persist for the duration of the connection. General connection attributes are listed in Table 1-3, "General connection attributes" and described in detail in this section.

ConnectionName

This attribute is also available as a Client connection attribute.

This attribute allows you to attach a symbolic name to any database connection. Connection names are unique within a process.

The symbolic name is used to help identify the connection in various TimesTen administrative utilities, such as ttIsql, ttXactAdmin and ttStatus. This can be particularly useful with processes that make multiple connections to the database, as is typical with multithreaded applications or in the identification of remote clients.

The value of this attribute is intended to be dynamically defined at connection time using the connection string. The default value is the connecting executable file name. It can also be defined statically in the DSN definition. Values used for ConnectionName should follow SQL identifier syntax rules.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set ConnectionName as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ConnectionName

Enter a string up to 30 characters that represents the name of the connection.If the specified or default connection name is in use, TimesTen assigns the name conn, where n is an integer greater than 0 to make the name unique.If not specified, the connecting process name.

Windows ODBC Data Source Administrator

Connection field

Enter a string up to 30 characters that represents the name of the connection.If the specified or default connection name is in use, TimesTen assigns the name conn, where n is an integer greater than 0 to make the name unique.If not specified, the connecting process name.

DDLCommitBehavior

This attribute controls transactional commit behavior in relation to DDL (Data Definition Language) statements

You can set it to the traditional TimesTen behavior or to the Oracle database behavior.

- Traditionally, in TimesTen databases, DDL statements are executed as part of the current transaction and are committed or rolled back along with the rest of the transaction.

- The Oracle database issues an implicit COMMIT before and after any DDL statement.

Note:
If PLSQL support is enabled, the DDLCommitBehavior must be the Oracle transactional commit behavior (value 0).
Do not use DDL statements in XA transactions.

DDL statements include:

- CREATE, ALTER or DROP of any database object (including tables, views, users procedures, indexes, etc.)

- TRUNCATE

- GRANT and REVOKE

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set DDLCommitBehavior as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DDLCommitBehavior

0 (default) - Oracle database style behavior. An implicit transaction commit is done before the execution of the DDL statement and a durable commit is done after execution of DDL statements.
1 - Traditional TimesTen style behavior. Execution of DDL statements does not trigger implicit transaction commits.

Windows ODBC Data Source Administrator

DDLCommitBehavior field

0 (default) - Oracle database style behavior. An implicit transaction commit is done before the execution of the DDL statement and a durable commit is done after execution of DDL statements.
1 - Traditional TimesTen style behavior. Execution of DDL statements does not trigger implicit transaction commits.

Examples

Example 1-1 TimesTen commit behavior

AUTOCOMMIT OFF;
CREATE TABLE t1 (c1 Varchar2(10));
COMMIT;

INSERT INTO t1 VALUES('some data');
1 row inserted.

CREATE TABLE t2 (c1 INTEGER);

ROLLBACK;

SELECT * FROM t1;
0 rows found.

SELECT * FROM t2;
2206: Table ttuser.t2 not found
The command failed.

INSERT INTO t1 VALUES('more data');
1 row inserted.

CREATE TABLE t1 (c1 VARCHAR2(10));
2207: Table t1 already exists
The command failed.

ROLLBACK;

SELECT * FROM t1;
0 rows found.

Example 1-2 Oracle commit behavior

This example shows Oracle behavior (DDLCommitBehavior=0). In this example, the INSERTs and the creation of table t2 are committed. The second insert ('more data') is committed even though the DDL statement triggering the commit (duplicate create of table t1) fails:

-- implicit commit here

Command> CREATE TABLE t1 (c1 varchar2(10));
Table created.

-- implicit commit here

Command> COMMIT;
Commit complete.

Command> INSERT INTO t1 VALUES('some data');
1 row created.

-- implicit commit here
Command> CREATE TABLE t2 (c1 INTEGER);
Table created.

-- implicit commit here

SQL> ROLLBACK;
Rollback complete.

Command> SELECT * FROM t1;
C1
----------
some data

Command> SELECT * FROM t2;
no rows selected

Command> INSERT INTO t1 VALUES('more data');
1 row created.
-- implicit commit here

Command> CREATE TABLE t1 (c1 VARCHAR2(10));
CREATE TABLE t1 (c1 VARCHAR2(10))
*
ERROR at line 1:
ORA-00955: name is already used by an existing object

-- implicit rollback

Command> ROLLBACK;
Rollback complete.

Command> SELECT * FROM t1;
C1
----------
some data
more data

DDLReplicationAction

Determines whether a table is included in an active standby pair replication scheme at table creation time when the DDLReplicationLevel connection attribute is set to 2.

The value may be modified by an ALTER SESSION statement, for example:

ALTER SESSION SET DDL_Replication_Action='EXCLUDE';

Values set by ALTER SESSION override the value set by this attribute.

Replication of DDL operations has these restrictions:

- CREATE TABLE AS SELECT statements are not replicated.

- The CREATE INDEX statement is replicated only when the index is created on an empty table.

For examples of altering an active standby pair, see "Altering an Active Standby Pair" in the Oracle TimesTen In-Memory Database Replication Guide.

When DDLCommitBehavior=0 (the default), DDL operations are automatically committed. When RETURN TWOSAFE has been specified, errors and timeouts may occur as described in "RETURN TWOSAFE" on in the Oracle TimesTen In-Memory Database Replication Guide. If a RETURN TWOSAFE timeout occurs, the DDL transaction is committed locally regardless of the LOCAL COMMIT ACTION that has been specified.

To learn more about replicating DDL, see "Making DDL changes in an active standby pair" in the Oracle TimesTen In-Memory Database Replication Guide.

Required privilege

ADMIN privilege is required if the value of this attribute is INCLUDE.

Setting

Set DDLReplicationAction as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DDLReplicationAction

INCLUDE (default) - When a table is created, it is automatically added to the active standby pair scheme.
EXCLUDE - When a table is created it is not automatically included in the active standby pair.

Windows ODBC Data Source Administrator

DDLReplicationAction field

INCLUDE (default) - When a table is created, it is automatically added to the active standby pair scheme.
EXCLUDE - When a table is created it is not automatically included in the active standby pair.

DDLReplicationLevel

Enables replication of the following DDL (Data Definition Language) statements in an active standby replication scheme:

DDL statements include:

- CREATE or DROP INDEX

- CREATE or DROP SYNONYM

- CREATE or DROP TABLE (including global temporary tables but not CREATE TABLE AS SELECT)

The value of this attribute may be modified by an ALTER SESSION statement, for example:

ALTER SESSION SET DDL_Replication_Level=1;

Values set by ALTER SESSION override the value set by this attribute.

Replication of DDL operations has these restrictions:

- CREATE TABLE AS SELECT statements are not replicated.

- The CREATE INDEX statement is replicated only when the index is created on an empty table.

- To control whether a table is included in an active standby pair replication scheme at the time of table creation, use the DDLReplicationAction connection attribute.

For examples of altering an active standby pair, see "Altering an Active Standby Pair" in the Oracle TimesTen In-Memory Database Replication Guide.

To learn more about replicating DDL, see "Making DDL changes in an active standby pair" in the Oracle TimesTen In-Memory Database Replication Guide.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set DDLReplicationLevel as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DDLReplicationLevel

1 - Replicates ALTER TABLE ADD or DROP COLUMN to the standby database. Does not replicate CREATE and DROP operations for tables, indexes or synonyms to the standby database.
2 (default) - Replicates creating and dropping of tables, indexes and synonyms.

Windows ODBC Data Source Administrator

DDL Replication Level field

1 - Replicates ALTER TABLE ADD or DROP COLUMN to the standby database. Does not replicate CREATE and DROP operations for tables, indexes or synonyms to the standby database.
2 (default) - Replicates creating and dropping of tables, indexes and synonyms.

Diagnostics

Allows an application to configure the level of diagnostics information generated by TimesTen for the connection. TimesTen diagnostics messages are warnings whose numbers lie within the range 20000 through 29999. Diagnostics connection attribute values are integers.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set Diagnostics as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

Diagnostics

0 - No diagnostics messages are generated.
1 (default) - Base level diagnostics messages are generated.

Windows ODBC Data Source Administrator

Diagnostics field

0 - No diagnostics messages are generated.
1 (default) - Base level diagnostics messages are generated.

DuplicateBindMode

This attribute determines whether applications use traditional TimesTen parameter binding for duplicate occurrences of a parameter in a SQL statement or Oracle-style parameter binding.

Traditionally, in TimesTen, multiple instances of the same parameter name in a SQL statement are considered to be multiple occurrences of the same parameter. When assigning parameter numbers to parameters, TimesTen assigns parameter numbers only to the first occurrence of each parameter name. The second and subsequent occurrences of a given name do not get their own parameter numbers. In this case, A TimesTen application binds a value for every unique parameter in a SQL statement. It cannot bind different values for different occurrences of the same parameter name nor can it leave any parameters or parameter occurrences unbound.In Oracle Database, multiple instances of the same parameter name in a SQL statement are considered to be different parameters. When assigning parameter numbers, Oracle assigns a number to each parameter occurrence without regard to name duplication. An Oracle application, at a minimum, binds a value for the first occurrence of each parameter name. For the subsequent occurrences of a given parameter, the application can either leave the parameter occurrence unbound or it can bind a different value for the occurrence.

For more details on parameter binding, see Oracle TimesTen In-Memory Database SQL Reference.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set DuplicateBindMode as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DuplicateBindMode

0 (default) - Use the Oracle parameter binding model.
1 - Use the traditional TimesTen parameter binding model.

Windows ODBC Data Source Administrator

Duplicate Bind Mode check box

unchecked (default) - Use the Oracle parameter binding model.
checked - Use the traditional TimesTen parameter binding model.

Notes

When using Oracle Call Interface, DuplicateBindMode must be set to 0.

When PLSQL is set to 1 and DuplicateBindMode is set to 1, PL/SQL programs may not issue SQL statements containing duplicate parameter names.

DurableCommits

By default, DurableCommits is set to 0. This means that a log record is written to the file system when a transaction is committed, but the log record is not immediately written to disk. This reduces transaction execution time at the risk of losing some committed transactions if a failure occurs. When DurableCommits is set to 1, a log record is written to disk when the transaction is committed.

A connection can also call the ttDurableCommit built-in procedure to do durable commits explicitly on selected transactions. A call to ttDurableCommit flushes the log buffer to disk. The log buffer is shared among all connections and contains log records from transactions of all connections.

Log records are continually copied from the file system to disk. You can use LogFlushMethod to control when the file system is synchronized with the disk.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set DurableCommits as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DurableCommits

0 (default) - Does not force log to disk on transaction commit.
1 - Forces log to disk on transaction commit.

Windows ODBC Data Source Administrator

Durable Commits check box

unchecked - Does not force log to disk on transaction commit.
checked - Forces log to disk on transaction commit

See also

LogFlushMethod

Isolation

By default, TimesTen uses read committed isolation. The Isolation attribute specifies the initial transaction isolation level for the connection. For a description of the isolation levels, see "Concurrency control through isolation and locking" in Oracle TimesTen In-Memory Database Operations Guide.

The value may be modified by an ALTER SESSION statement. For details, see Oracle TimesTen In-Memory Database SQL Reference.

CREATE CACHE GROUP, ALTER CACHE GROUP and DROP CACHE GROUP statements are not supported in serializable isolation mode.

If the passthrough or the propagate IMDB Cache feature is used, the TimesTen isolation level setting is inherited by the Oracle session. TimesTen serializable mode is mapped to Oracle's serializable mode. TimesTen read committed mode is mapped to Oracle's read committed mode. For more details on the passthrough attribute, see "PassThrough".

With PassThrough set to 3, you must use an ALTER SESSION statement to permanently modify the isolation level on the Oracle connection. For example on a connection to the DSN repdb1_1121:

1. Call ttIsql and connect to the DSN with PassThrough level 3:

% ttIsql;
Command> connect "dsn=repdb1_1121;passtrhough=3";
Connection successful:. . .PassThrough=3; TypeMode=0;
<default setting Autocommit=1>

2. Turn off AutoCommit:

Command> autocommit=0;

3. Temporarily change the PassThrough level to 0:

Command> passthrough=0;

4. Alter the isolation level to serializable:

Command> prepare 1 ALTER SESSION SET ISOLATION_LEVEL=serializable;
Command> commit;
Command> exec=1;

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set Isolation as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

Isolation

0 - Connects to database in serializable isolation mode.
1 (default) - Connects to database in read committed mode.

Windows ODBC Data Source Administrator

Isolation dropdown list

0 - Connects to database in serializable isolation mode.
1 (default) - Connects to database in read committed isolation mode.

LockLevel

By default, TimesTen enables row-level locking for maximum concurrency. With row-level locking, transactions usually obtain locks on the individual rows that they access, although a transaction may obtain a lock on an entire table if TimesTen determines that doing so would result in better performance. Row-level locking is the best choice for most applications, as it provides the finest granularity of concurrency control. To use row-level locking, applications must set the LockLevel connection attribute to 0 (the default value). To cache Oracle tables, you must set row-level locking. In order to CREATE, DROP, or ALTER a user, you can only use row-level locking and thus, the Locklevel must be set to 0 before you can perform any of these operations.

To give every transaction in this connection exclusive access to the database, you can enable database-level locking by setting the LockLevel attribute to 1. Doing so may improve performance for some applications.

A connection can change the desired lock level at any time by calling the ttLockLevel built-in procedure. Connections can also wait for unavailable locks by calling the ttLockWait built-in procedure. Different connections can coexist with different levels of locking, but the presence of even one connection doing database-level locking leads to loss of concurrency. To display a list of all locks on a particular database you can use the ttXactAdmin utility.

When using PL/SQL in your applications, set LockLevel=0 and selectively change to database level locking for specific transactions that require that level of locking by using the ttLockLevel built-in procedure.

Required privilege

ADMIN privilege is required if the value of this attribute is 1.

Setting

Set LockLevel as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LockLevel

0 (default) - Transactions access database using row-level locking.
1 - Transactions access database by acquiring an exclusive lock on the entire database.

Windows ODBC Data Source Administrator

DS-Level Locking check box

unchecked (default) - Transactions access database using row-level locking.
checked - Transactions access database by acquiring an exclusive lock on the entire database.

LockWait

Allows an application to configure the lock wait interval for the connection. The lock wait interval is the number of seconds to wait for a lock when there is contention on it. Sub-second LockWait values significant to tenths of a second can be specified using decimal format for the number of seconds. For example:

LockWait = 0.1

results in a lock wait of one tenth of a second.

LockWait may be set to any value between 0 and 1,000,000 inclusive to a precision of tenths of a second. The default is 10 seconds:

LockWait = 10.0

Actual lock wait response time is imprecise and may be exceeded by up to one tenth of a second, due to the scheduling of the agent that detects timeouts. This imprecision does not apply to zero second timeouts, which are always reported immediately.

The number of connections to a database can impact the time needed to resolve lock contentions. If you anticipate a large number of connections to the database, increase the lock wait interval.

Cache grid uses message wait time with lock wait time. When using cache grid, lock wait times are approximately half the value you have specified. If your applications require the full lock wait time, specify twice the desired seconds.

A connection can change the lock wait interval at any time by calling the ttLockWait built-in procedure.

To display a list of all locks on a particular database you can use the TimesTen utility ttXactAdmin.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set LockWait as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

LockWait

s - Seconds to wait for locking conflict resolution before timing out. Default is 10 seconds.

Windows ODBC Data Source Administrator

LockWait field

s - Seconds to wait for locking conflict resolution before timing out. Default is 10 seconds.

MatchLogOpts

The first connection to a database determines whether the transaction log files are purged. Any subsequent connection must specify the same value for the LogPurge attribute or TimesTen generates an error. If a connection does not know the current state of the LogPurge attribute, MatchLogOpts can be set so that the logging attributes match.

Note:
If MatchLogOpts is set to True for the first connector, an error is generated and the connection fails. Because of this, use the attribute with caution.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set MatchLogOpts as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

MatchLogOpts

0 (default) - Value of LogPurge is used.
1 - Value of LogPurge is ignored. Instead, values match those of current connections.

Windows ODBC Data Source Administrator

Match Log Opts check box

unchecked (default) - Value of LogPurge is used.
checked - Value of LogPurge is ignored. Instead, values match those of current connections.

PermWarnThreshold

Indicates the threshold percentage at which TimesTen issues out-of-memory warnings for the permanent partition of the database's memory. The database is considered no longer out of permanent memory if it falls 10% below this threshold. An application must call the built-in procedure ttWarnOnLowMemory to receive out-of-memory warnings. The threshold also applies to SNMP warnings. See "ttWarnOnLowMemory". Also see "Diagnostics through SNMP Traps" in Oracle TimesTen In-Memory Database Error Messages and SNMP Traps.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set PermWarnThreshold as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PermWarnThreshold

p - Percentage at which warning should be issued. Default is 90%

Windows ODBC Data Source Administrator

Low Memory Warning Thresholds for Permanent Data field

p - Percentage at which warning should be issued. Default is 90%.

PrivateCommands

When multiple connections execute the same command, they access common command structures controlled by a single command lock. To avoid sharing their commands and possibly placing contention on the lock, you can use PrivateCommands. This gives you better scaling at the cost of increased temporary space usage.

By default, the PrivateCommands is turned off and commands are shared.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set PrivateCommands as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PrivateCommands

0 (default) - Commands are shared with other connections.
1 - Commands are not shared with any other connection.

Windows ODBC Data Source Administrator

Private Commands field

0 (default) - Commands are shared with other connections.
1 - Commands are not shared with any other connection.

Notes

If there are many copies of the same command, all of them are invalidated by a DDL or statistics change. This means that reprepare of these multiple copies takes longer when PrivateCommands = 1. With more commands DDL execution can take slightly longer.

When using the PrivateCommands attribute, memory consumption can increase considerably if the attribute is not used cautiously. For example, if PrivateCommands=1 for an application that has 100 connections with 100 commands, there are 10,000 commands in the system: one private command for each connection.

PWDCrypt

The PWDCrypt contains an encrypted version of the corresponding PWD value. The value for PWD is stored in clear text, which does not allow special characters, in the .odbc.ini file on UNIX and in the Windows Registry on Windows. Any users who have access to the .odbc.ini file or Windows Registry can view the value for this attribute. The PWDCrypt attribute allows special characters, is case sensitive and contains the value of the encrypted password.

For security reasons, the PWDCrypt attribute should only be placed in User DSNs or user private ODBCINI files. The presence of the PWDCrypt in System DSNs allows any user to use the PWDCrypt value to connect to TimesTen, even though they have no knowledge of the cleartext password.

To generate the value for this attribute, run the ttuser utility.

Required privilege

No privilege is required to change the value of this attribute.

Notes

If PWD and PWDCrypt are both supplied, the PWD value is used. See "UID and PWD".

The PWD is not stored anywhere in the TimesTen system.

Setting

Set PWDCrypt as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PWDCrypt

Enter the value generated by the ttuser utility.

Windows ODBC Data Source Administrator

PWDCrypt field

Enter the value generated by the ttuser utility.

QueryThreshold

Use this attribute to write a warning to the support log and throw an SNMP trap when the execution time of a SQL statement exceeds the specified value. For queries executed by the replication agent, see Oracle TimesTen In-Memory Database Replication Guide. You cannot set a query threshold for a SQL statement that is executed by the cache agent. The value of QueryThreshold applies to all connections. It applies to all SQL statements except those executed by the replication agent or the cache agent.

The value of this attribute can be any integer equal to or greater than 0. The default value is 0. A value of 0 indicates that no warning is issued. The unit is seconds.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set QueryThreshold as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

QueryThreshold

A non-negative integer. Default is 0 and indicates that TimesTen does not return a warning.

Windows ODBC Data Source Administrator

QueryThreshold (secs) field

A non-negative integer. Default is 0 and indicates that TimesTen does not return a warning.

ReplicationTrack

For user defined replication, assigns a connection to a replication track. All transactions issued by the connection are assigned to this track, unless the track is altered.

To start user-specified parallel replication you must set a value for the ReplicationParallelism attribute, specifying the number of replication tracks to be applied in parallel. You must also set ReplicationApplyOrdering to 1.

The TTREP.REPPEERS system table Track_ID column shows the track associated with the connection.

You can use the ALTER SESSION SQL statement to assign or change the value of this attribute within a session.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set ReplicationTrack as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ReplicationTrack

n - An integer between 1 and 64 that specifies the replication track to be used by transactions issued by the connection.

Windows ODBC Data Source Administrator

Replication Track field

n - An integer between 1 and 64 that specifies the replication track to be used by transactions issued by the connection.

SQLQueryTimeout

Use this attribute to specify the time limit in seconds within which the database should execute SQL statements.

The value of SQLQueryTimeout can be any integer equal to or greater than 0. The default value is 0. A value of 0 indicates that the query does not time out.

This attribute does not stop IMDB Cache operations that are being processed on Oracle. This includes passthrough statements, flushing, manual loading, manual refreshing, synchronous writethrough, and propagating.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set SQLQueryTimeout as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

SQLQueryTimeout

n - Time limit in seconds for which the database should execute SQL queries.

Windows ODBC Data Source Administrator

QueryTimeout (secs) field

n - Time limit in seconds for which the database should execute SQL queries.

TempWarnThreshold

Indicates the threshold percentage at which TimesTen issues out-of- memory warnings for the temporary partition of the database's memory. The database is considered no longer out of temporary memory if it falls 10% below this threshold. An application must call the built-in procedure ttWarnOnLowMemory to receive out-of-memory warnings. The threshold also applies to SNMP warnings. See "ttWarnOnLowMemory". Also see "Diagnostics through SNMP Traps" in Oracle TimesTen In-Memory Database Error Messages and SNMP Traps

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TempWarnThreshold as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TempWarnThreshold

p - Percentage at which warning should be issued. Default is 90%.

Windows ODBC Data Source Administrator

Low Memory Warning Thresholds for Temporary Data field

p - Percentage at which warning should be issued. Default is 90%

UID and PWD

A user ID and password must be provided by a user who is identified internally to TimesTen. Alternatively, an encrypted password can be supplied using the PWDCrypt attribute. Some TimesTen operations prompt for the UID and PWD of the user performing the operation.

For client/server applications, specify UID and PWD either in the Client DSN configuration or in the connection string. The UID and PWD values specified in a connection string take precedence over the values specified in the Client DSN configuration.

When caching Oracle tables, PWD specifies the TimesTen password while OraclePWD specifies the Oracle password.

Required privilege

No privilege is required to change the values of these attributes.

Setting

Set UID and PWD as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

UID

Character string specifying the user ID.

C or Java programs or UNIX ODBC.INI file

PWD

Character string specifying the password that corresponds to the user ID.

Windows ODBC Data Source Administrator

User ID field

Character string specifying the user ID.

WaitForConnect

When an application requests a connection to a TimesTen database and the connection is not possible (perhaps during concurrent loading/recovery of a database), TimesTen normally waits for completion of the conflicting connection. In some cases, it can take some time for an application to connect to a database. If the WaitForConnect attribute is off and the database is not immediately accessible, TimesTen returns immediately an error. For a description of the error, look for the error message number in "Warnings and Errors" in Oracle TimesTen In-Memory Database Error Messages and SNMP Traps.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set WaitForConnect as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

WaitForConnect

0 - Does not wait if connection to database fails.
1 (default) - Waits until connection to database is possible.

Windows ODBC Data Source Administrator

Wait For Connect check box

unchecked - Does not wait if connection to database fails.
checked (default) - Waits until connection to database is possible.

NLS general connection attributes

NLS connection attributes are set by each connection and persist for the duration of the connection. These attributes control the globalization behaviors of the database. NLS general connection attributes are listed Table 1-4, "NLS general connection attributes" and described in detail in this section.

You can use the ALTER SESSION statement to change NLS parameters to override the values that are assigned to these attributes at connection time.

ConnectionCharacterSet

ConnectionCharacterSet is also available as a Client connection attribute.

This attribute specifies the character encoding for the connection, which may be different from the database character set. This can be useful when you have multiple connections to a database and one or more of those connections requires a character set that differs from that specified in the database.

The connection character set determines the character set in which data is displayed or presented.

Generally, you should choose a connection character set that matches your terminal settings or data source. Your database character set should be chosen based on the data requirements. For example: Do you have data in Unicode or is your data in Japanese on UNIX (EUC) or Windows (SJIS)?

When the database and connection character sets differ, TimesTen performs data conversion internally based on the connection character set. If the connection and database character sets are the same, TimesTen does not need to convert or interpret the data set. Best performance occurs when connection and database character sets match, since no conversion is required.

Parameters and SQL query text sent to the connect should be in the connection character set. Results and error messages returned by the connection are returned in the connection character set.

Character set conversions are not supported for the TIMESTEN8 character set. A ConnectionCharacterSet value of TIMESTEN8 results in an error if the value assigned to the DatabaseCharacterSet is not TIMESTEN8.

This attribute accepts the same values used for the DatabaseCharacterSet. For a list of character set names that can be used as a value for this attribute, see "Supported character sets".

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set ConnectionCharacterSet as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ConnectionCharacterSet

The default value for ConnectionCharacterSet is US7ASCII, except when the database character set is TIMESTEN8.

Windows ODBC Data Source Administrator

Connection CharacterSet list

The default value for ConnectionCharacterSet is US7ASCII, except when the database character set is TIMESTEN8.

NLS_LENGTH_SEMANTICS

The NLS_LENGTH_SEMANTICS attribute is used to set the default length semantics configuration. Length semantics determines how the length of a character string is determined. The length can be treated as a sequence of characters or a sequence of bytes.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set NLS_LENGTH_SEMANTICS as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

NLS_LENGTH_ SEMANTICS

Specify either BYTE (default) or CHAR.

Windows ODBC Data Source Administrator

NLS_LENGTH_ SEMANTICS list

Select either BYTE (default) or CHAR.

NLS_NCHAR_CONV_EXCP

The NLS_NCHAR_CONV_EXCP attribute determines whether an error is reported when there is data loss during an implicit or explicit character type conversion between NCHAR/NVARCHAR2 data and CHAR/VARCHAR2 data. A replacement character is substituted for characters that cannot be converted.

Implicit and explicit conversions between CHAR and NCHAR are supported, except when using the TIMESTEN8 character set.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set NLS_NCHAR_CONV_EXCP as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

NLS_NCHAR_CONV_EXCP

0 (default) - Errors are not reported when there is a data loss during character type conversion.
1 - Errors are reported when there is a data loss during character type conversion.

Windows ODBC Data Source Administrator

NLS_NCHAR_ CONV_EXCP checkbox

unchecked (default) - Error messages are not reported when there is a data loss during character type conversion.
checked - Error messages are reported when there is a data loss during character type conversion.

NLS_SORT

The NLS_SORT attribute indicates which collating sequence to use for linguistic comparisons. It accepts the values listed in "Supported Linguistic Sorts." All these values can be modified to do case-insensitive sorts by appending _CI to the value. To perform accent-insensitive and case-insensitive sorts, append _AI to the value.

For materialized views and cache groups, TimesTen recommends that you explicitly specify the collating sequence using the NLSSORT SQL function rather than using this attribute in the connection string or DSN definition.

Operations involving character comparisons support linguistic case-sensitive collating sequences. Case-insensitive sorts may affect DISTINCT value interpretation.

NLS_SORT may affect many operations. The supported operations that are sensitive to collating sequence are:

- MIN, MAX

- BETWEEN

- =, <>, >, >=, <, <=

- DISTINCT

- CASE

- GROUP BY

- HAVING

- ORDER BY

- IN

- LIKE

Only BINARY sort is supported with the TIMESTEN8 character set.

NLS_SORT settings other than BINARY may have significant performance impact on character operations.

Note:
Primary key indexes are always based on the BINARY collating sequence. Use of non-BINARY NLS_SORT equality searches cannot use the primary key index

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set NLS_SORT as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

NLS_SORT

Specify the linguistic sort sequence or BINARY (default).

Windows ODBC Data Source Administrator

NLS_SORT dropdown list

Specify the linguistic sort sequence or BINARY (default).

Supported linguistic sorts

The tables in this section list the supported values for the NLS_SORT general connection attribute and the NLS_SORT SQL function.

Monolingual linguistic sorts

Basic name

Extended name

ARABIC

-

ARABIC_MATCH

-

ARABIC_ABJ_SORT

-

ARABIC_ABJ_MATCH

-

ASCII7

-

AZERBAIJANI

XAZERBAIJANI

BENGALI

-

BIG5

-

BINARY

-

BULGARIAN

-

CANADIAN FRENCH

-

CATALAN

XCATALAN

CROATIAN

XCROATIAN

CZECH

XCZECH

CZECH_PUNCTUATION

XCZECH_PUNCTUATION

DANISH

XDANISH

DUTCH

XDUTCH

EBCDIC

-

EEC_EURO

-

EEC_EUROPA3

-

ESTONIAN

-

FINNISH

-

FRENCH

XFRENCH

GERMAN

XGERMAN

GERMAN_DIN

XGERMAN_DIN

GBK

-

GREEK

-

HEBREW

-

HKSCS

-

HUNGARIAN

XHUNGARIAN

ICELANDIC

-

INDONESIAN

-

ITALIAN

-

LATIN

-

LATVIAN

-

LITHUANIAN

-

MALAY

-

NORWEGIAN

-

POLISH

-

PUNCTUATION

XPUNCTUATION

ROMANIAN

-

RUSSIAN

-

SLOVAK

XSLOVAK

SLOVENIAN

XSLOVENIAN

SPANISH

XSPANISH

SWEDISH

-

SWISS

XSWISS

THAI_DICTIONARY

-

TURKISH

XTURKISH

UKRAINIAN

-

UNICODE_BINARY

-

VIETNAMESE

-

WEST_EUROPEAN

XWEST_EUROPEAN

Multilingual linguistic sorts

Sort name

Description

CANADIAN_M

Canadian French sort supports reverse secondary, special expanding characters.

DANISH_M

Danish sort supports sorting uppercase characters before lowercase characters.

FRENCH_M

French sort supports reverse sort for secondary.

GENERIC_M

Generic sorting order which is based on ISO14651 and Unicode canonical equivalence rules but excluding compatible equivalence rules.

JAPANESE_M

Japanese sort supports SJIS character set order and EUC characters which are not included in SJIS.

KOREAN_M

Korean sort Hangul characters are based on Unicode binary order. Hanja characters based on pronunciation order. All Hangul characters are before Hanja characters.

SPANISH_M

Traditional Spanish sort supports special contracting characters.

THAI_M

Thai sort supports swap characters for some vowels and consonants.

SCHINESE_RADICAL_M

Simplified Chinese sort is based on radical as primary order and number of strokes order as secondary order.

SCHINESE_STROKE_M

Simplified Chinese sort uses number of strokes as primary order and radical as secondary order.

SCHINESE_PINYIN_M

Simplified Chinese Pinyin sorting order.

TCHINESE_RADICAL_M

Traditional Chinese sort based on radical as primary order and number of strokes order as secondary order.

TCHINESE_STROKE_M

Traditional Chinese sort uses number of strokes as primary order and radical as secondary order. It supports supplementary characters.

PL/SQL first connection attributes

PL/SQL connection attributes are set by each connection and persist for the duration of the connection. These attributes control the behaviors of the database. PL/SQL first connection attributes are listed Table 1-5, "PL/SQL first connection attributes" and described in detail in this section.

PLSQL

This attribute determines whether PL/SQL is configured for the database.

Specifying PLSQL=1 enables PL/SQL use in the database. Specifying PLSQL=0 disables PL/SQL use in the database.

On platforms where PL/SQL is supported, and in TimesTen installations where PL/SQL support was enabled at installation time, the default is PLSQL=1. In other environments the default is PLSQL=0.

PL/SQL may be enabled when the database is initially created, or at any first connect afterwards. However, once PL/SQL support is enabled in a database, you cannot disable it later.

Configuring PL/SQL support in a database results in the creation of several "built-in" PL/SQL packages and procedures that are defined in Oracle TimesTen In-Memory Database PL/SQL Developer's Guide.

Some things to be aware of when setting this attribute are:

- If an application connects to a database that has PL/SQL enabled, and the application or odbc.ini file specifies PLSQL=0, TimesTen returns a warning.

- If an application connects to a database that does not have PL/SQL enabled, and the application or odbc.ini file specifies PLSQL=1, what happens depends on whether this is a first connect or a subsequent one. At first connect, the database is configured to support PL/SQL. Otherwise, TimesTen returns an error.

- If PLSQL=0, all PL/SQL first and general connection attributes are ignored.

- If PLSQL=0, any attempt to change the value of a PL/SQL general connection attributes returns an error.

- If PLSQL=1, we recommend setting LockLevel=0 for the connection. If database level locking is enabled, some PL/SQL internal functions cannot be performed. You can use the ttLockLevel built-in procedure to selectively change to database-level locking only for those specific transactions that require it.

- If PL/SQL support is enabled, the DDLCommitBehavior must be the Oracle transactional commit behavior (value 0).

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set PLSQL as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PLSQL

0 - Indicates that PL/SQL is not enabled for the database.
1 (default) - Enables PL/SQL for the database.

Windows ODBC Data Source Administrator

PL/SQL Enabled checkbox

checked - Enables PL/SQL for the database.
unchecked - Indicates that PL/SQL is not enabled for the database.

PLSQL_MEMORY_ADDRESS

Use of PL/SQL requires a shared memory segment. This shared memory contains recently-executed PL/SQL code, shared package state, and metadata associated with the operation of PL/SQL. This shared memory segment is separate from the one containing the TimesTen database.

This attribute determines the virtual address at which this shared memory segment is loaded into each process that uses the TimesTen "direct" drivers. This memory address must be identical in each process using TimesTen. You must specify the value as a hexadecimal address.

If PL/SQL use is enabled (PLSQL=1) and you have not specified a value for PLSQL_MEMORY_ADDRESS, TimesTen uses a platform-dependent default value.

The default values for each platform are designed to:

1. Maximize the amount of virtual space for your TimesTen database and for your applications.

2. Minimize the fragmentation of the virtual address space.

3. Avoid conflicts with other uses of virtual address apace.

The platform specific default memory addresses are:

Operating system

Address

32-bit Linux

10000000

64-bit Linux

0000007fa0000000

32-bit AIX

c0000000

64-bit AIX

06ffffff00000000

32-bit Solaris

10000000

64-bit Solaris

ffffff0000000000

32-bit Windows

5B8C0000

Some things to consider when setting this attribute are:

- If applications simultaneously connect to multiple TimesTen databases in direct mode, then each database must use a different value for value for PLSQL_MEMORY_ADDRESS.

- The value of this attribute is stored persistently by TimesTen. This allows the attribute value to be properly specified in situations when the database is loaded automatically by TimesTen. For example, the database is automatically loaded if RamPolicy for the database is set to 1.

- If the PL/SQL shared memory cannot be mapped at the appropriate address, TimesTen returns an error and the connection to the database fails.

- The memory segment size is determined by the value of PLSQL_MEMORY_SIZE.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set PLSQL_MEMORY_ADDRESS as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PLSQL_MEMORY_ADDRESS

A hexidecimal value that indicates the memory address for PL/SQL process.

Windows ODBC Data Source Administrator

PL/SQL Memory Address field

A hexidecimal value that indicates the memory address for PL/SQL process.

PLSQL_MEMORY_SIZE

Use of PL/SQL requires a shared memory segment. This attribute determines the size in megabytes of the shared memory segment used by PL/SQL, which is shared by all connections.

This shared memory contains recently-executed PL/SQL code, the shared package state, and metadata associated with the operation of PL/SQL. This shared memory segment is separate from the one containing the TimesTen database.

Some things to consider when setting this attribute are:

- The value of this attribute is stored persistently by TimesTen. This allows the attribute value to be properly specified in situations when the database is loaded automatically by TimesTen. For example, the database is automatically loaded if RamPolicy for the database is set to 1.

- The default memory size is 32 MB on UNIX systems and 23 MB on Windows 32-bit systems. The minimum size is 2MB, if PLSQL=1. For most PL/SQL users, the default memory size should be an adequate amount of memory. For databases that make extensive use of PL/SQL, specify a larger memory size. If the memory space is exhausted, ORA-4031 errors may occur during PL/SQL execution.

- The address of the memory segment is determined by the value of PLSQL_MEMORY_ADDRESS.

For more information on how to calculate the size for PLSQL_MEMORY_SIZE, see "Calculate shared memory size for PL/SQL runtime" in Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set PLSQL_MEMORY_SIZE as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PLSQL_MEMORY_SIZE

Specify a positive integer greater than 2 representing the size of the shared memory segment in megabytes. The default size is 32 MB.

Windows ODBC Data Source Administrator

PL/SQL Memory Size field

Specify a positive integer greater than 2 representing the size of the shared memory segment in megabytes. The default size is 23 MB.

PL/SQL general connection attributes

PL/SQL general connection attributes are set by each connection and persist for the duration of the connection. These attributes control the behaviors of the database. PL/SQL general connection attributes are listed in Table 1-6, "PL/SQL general connection attributes" and described in detail in this section.

You can use the ALTER SESSION statement to change PL/SQL parameters to override the values that are assigned to the PL/SQL general connection attributes at connection time. For details, see Oracle TimesTen In-Memory Database SQL Reference.

PLSCOPE_SETTINGS

PLSCOPE_SETTINGS controls whether the PL/SQL compiler generates cross-reference information. Either all or no cross-references are generated.

Some things to consider when setting this attribute are:

- The PLSCOPE_SETTINGS connection attribute determines the initial value of this attribute within a session. The value may be modified by an ALTER SESSION statement. If the attribute is specified in an ALTER SESSION statement in a database where PLSQL=0, an error is returned.

- If this attribute is specified in a connection string or in the odbc.ini file and the application is connecting to a database where PLSQL=0, no error or warning results.

Note:
For more details on this attribute, see Oracle TimesTen In-Memory Database PL/SQL Developer's Guide.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set PLSCOPE_SETTINGS as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PLSCOPE_SETTINGS

IDENTIFIERS:NONE (default)
IDENTIFIERS:ALL

Windows ODBC Data Source Administrator

PLScope settings pulldown list

IDENTIFIERS:NONE (default)
IDENTIFIERS:ALL

PLSQL_CCFLAGS

This attribute can be used to set directives to control conditional compilation of PL/SQL units, which allows you to customize the functionality of a PL/SQL program depending on conditions that are checked. This is especially useful when applications may be deployed to multiple database environments. Possible uses include activating debugging or tracing features, or basing functionality on the version of the database.

Use this format:

PLSQL_CCFLAGS = 'v1:c1,v2:c2,...,vn:cn'

v1 has the form of an unquoted PL/SQL identifier. It is unrestricted and can be a reserved word or a keyword. The text is insensitive to case. Each one is known as a flag or flag name. Each vi can occur multiple times in the string, each occurrence can have a different flag value, and the flag values can be of different kinds.

c1 is one of the following: a PL/SQL boolean literal, a PLS_INTEGER literal, or the literal NULL. The text is insensitive to case. Each one is known as a flag value and corresponds to a flag name.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set PLSQL_CCFLAGS as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PLSQL_CCFLAGS

'A string literal with this format:
'v1:c1,v2:c2,...,vn:cn'

Default: null

Windows ODBC Data Source Administrator

PL/SQL CCFlags field

'A string literal with this format:
'v1:c1,v2:c2,...,vn:cn'

Default: null

You can use the ALTER SESSION SQL statement to change this attribute within a session.

PLSQL_CONN_MEM_LIMIT

This attribute specifies the maximum amount of process heap memory in megabytes that PL/SQL can use for the connection in which it is set.

Some things to consider when setting this attribute are:

- PL/SQL does not allocate this memory until or unless it is needed. Many PL/SQL programs require only a small amount of memory. How you write your application can determine memory requirements. For example, using large VARRAYs in PL/SQL code can require a lot of memory.

- If you attempt to allocate more memory than allowed, TimesTen returns an error.

- The value can be modified with the ALTER SESSION statement.

See Oracle TimesTen In-Memory Database PL/SQL Developer's Guide for more information.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set PLSQL_CONN_MEM_LIMIT as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PLSQL_CONN_MEM_LIMIT

An integer value in MB. Default value is 100MB.

Windows ODBC Data Source Administrator

PL/SQL Connection Memory Limit field

An integer value in MB. Default value is 100MB.

PLSQL_OPTIMIZE_LEVEL

This attribute specifies the optimization level to be used to compile PL/SQL library units. The higher the setting of this parameter, the more effort the compiler makes to optimize PL/SQL library units.

Some things to consider when setting this attribute are:

- The PLSQL_OPTIMIZE_LEVEL connection attribute determines the initial value of this attribute within a session. The value may be modified by an ALTER SESSION statement. If the attribute is specified in an ALTER SESSION statement in a database where PLSQL=0, an error is returned.

- If this attribute is specified in a connection string or in the odbc.ini file and the application is connecting to a database where PLSQL=0, no error or warning results.

Note:
For more details on this attribute, see Oracle TimesTen In-Memory Database PL/SQL Developer's Guide.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set PLSQL_OPTIMIZE_LEVEL as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PLSQL_OPTIMIZE_LEVEL

For details on the settings for this attribute, see Oracle TimesTen In-Memory Database PL/SQL Developer's Guide.
The default value is 2.

Windows ODBC Data Source Administrator

PL/SQL Optimization Level pulldown list

For details on the settings for this attribute, see Oracle TimesTen In-Memory Database PL/SQL Developer's Guide.
The default value is 2.

PLSQL_TIMEOUT

This attribute controls how long (in seconds) PL/SQL program units, including PL/SQL procedures, anonymous blocks and functions, are allowed to run before being automatically terminated.

This value may be modified with an ALTER SESSION statement. If this value is modified through ALTER SESSION, the new value impacts any PL/SQL program units that are currently running.

Note:
If you are using PL/SQL, set the PLSQL_TIIMEOUT value to a value that is at least 5 seconds less than TTC_TIMEOUT.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set PLSQL_TIMEOUT as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PLSQL_TIMEOUT

A positive integer representing the number of seconds for the timeout value.
A value of 0 means that there is no timeout limit.

The default value is 30 seconds.

Windows ODBC Data Source Administrator

PL/SQL Timeout field

A positive integer representing the number of seconds for the timeout value.
A value of 0 means that there is no timeout limit.

The default value is 30 seconds.

See Also

TTC_Timeout

IMDB Cache first connection attributes

IMDB Cache first connection attributes are used only when you are using the IMDB Cache product. IMDB Cache first connection attributes are listed in Table 1-7, "IMDB Cache first connection attributes" and described in detail in this section.

CacheAWTMethod

Determines whether PL/SQL execution method or SQL array execution method is used for Asynchronous Writethrough propagation to apply changes to the Oracle server.

By default, Asynchronous Writethrough (AWT) uses PL/SQL execution method, CacheAWTMethod=1, AWT bundles all pending operations into a single PL/SQL collection that is sent to the Oracle server to be executed. This method can improve AWT throughput when there are mixed transactions and network latency between TimesTen and the Oracle server.CacheAWTMethod=0

The SQL array execution to apply changes within TimesTen to the Oracle database works well when the same type of operation is repeated. For example, array execution is very efficient when a user does an update that affects several rows of the table. Updates are grouped together and sent to the Oracle server in one batch.

PL/SQL execution method transparently falls back to array execution mode temporarily when it encounters one of the following:

- A statement that is over 32761 bytes in length.

- A statement that references a column of type BINARY FLOAT, BINARY DOUBLE and VARCHAR of length greater than 4000 bytes.

Specify the SQL execution method, CacheAWTMethod=0, if any AWT cache group contains a VARBINARY column.

The SYSTEMSTATS table contains information about the number of times the execution method temporarily falls back to SQL array execution.

Note:
Use the same AWT execution method on all TimesTen nodes in any active standby pair replication scheme.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set CacheAWTMethod as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

CacheAWTMethod

0 - Use SQL array execution method.
1(default) - Use PL/SQL collections and anonymous blocks (PL/SQL execution method).

Windows ODBC Data Source Administrator

Cache AWT Method field

0 - Use SQL array execution method.
1 (default) - Use PL/SQL collections and anonymous blocks (PL/SQL execution method).

IMDB Cache database attributes

IMDB Cache connection attributes are used only when you are using the IMDB Cache product. IMDB Cache data store attributes are listed and described in detail in this section.

CacheAWTParallelism

CacheAwtParallelism indicates the number of threads that should be used to apply changes to the Oracle database. This attribute has a relationship to ReplicationParallelism and ReplicationApplyOrdering. The default is 1.

If you do not set this attribute or if you set it to the default value of 1, the number of threads that apply changes to Oracle is twice the setting for ReplicationParallelism. In this case, ReplicationParallelism can only be set to 16.

If both ReplicationParallelism and CacheAwtParallelism attributes are set, the value set in CacheAwtParallelism configures the number of threads used for parallel propagation. The setting for CacheAwtParallelism determines the number of apply threads for parallel propagation and the setting for ReplicationParallelism determines the number of threads for parallel replication.

To learn more about parallel AWT caching, see "Configuring parallel propagation to Oracle tables" in the Oracle In-Memory Database Cache User's Guide.

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set CacheAWTParallelism as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

CacheAWTParallelism

n - An integer between 1 and 31 that indicates the number of threads that should be used to apply changes to Oracle database. The default is 1.

Windows ODBC Data Source Administrator

Cache AWT Parallelism field

n - An integer between 1 and 31 that indicates the number of threads that should be used to apply changes to Oracle database. The default is 1.

CacheGridEnable

Determines whether cache grid is enabled or disabled. The TimesTen database must be a member of a cache grid before you can create cache groups. The default is 1 (enabled).

Required privilege

Only the instance administrator can change the value of this attribute.

Setting

Set CacheGridEnable as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

CacheGridEnable

0 - Cache groups can be defined outside of a cache grid.
1 (default) - All cache groups in the database must be defined as members of a cache grid.

Windows ODBC Data Source Administrator

Cache Grid Enable check box

unchecked - Cache groups can be defined outside of a cache grid.
checked (default) - All cache groups in the database must be defined as members of a cache grid.

CacheGridMsgWait

Specifies the number of seconds that an application waits for a message response from a remote member in a cache grid.

The maximum wait time includes the value of this attribute added to the value of LockWait connection attribute.

For more information on caching Oracle data in a TimesTen cache grid, see Oracle In-Memory Database Cache User's Guide.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set CacheGridMsgWait as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

CacheGridMsgWait

Set to the number of seconds that TimesTen should wait for a cache grid message from a remote member. The default is 60 seconds.

Windows ODBC Data Source Administrator

Cache Grid Message Wait field

Set to the number of seconds that TimesTen should wait for a cache grid message from a remote member. The default is 60 seconds.

IMDB Cache general connection attributes

IMDB Cache general connection attributes are used only when you are using the IMDB Cache product. IMDB Cache general connection attributes are listed in Table 1-9, "IMDB Cache general connection attributes" and described in detail in this section.

DynamicLoadEnable

This attribute enables or disables dynamic load of Oracle data to a TimesTen dynamic cache group. By default, dynamic load of Oracle data is enabled.

To enable or disable dynamic load at the statement level and temporarily override the setting of this attribute, set the DynamicLoadEnable optimizer flag with the ttOptSetFlag built-in procedure.

Note:
The value of this attribute overrides the dynamic load behavior of all dynamic cache groups for the current connection to the database.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set DynamicLoadEnable as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DynamicLoadEnable

0 - Disables dynamic load of Oracle data to TimesTen dynamic cache groups for the current connection.
1 (default) - Enables dynamic load of Oracle data to TimesTen dynamic cache groups for the current connection.

Windows ODBC Data Source Administrator

Dynamic Load Enable field

0 - Disables dynamic load of Oracle data to TimesTen dynamic cache groups for the current connection.
1 (default) - Enables dynamic load of Oracle data to TimesTen dynamic cache groups for the current connection.

DynamicLoadErrorMode

This attribute controls what happens when an application executes a SQL operation against a dynamic cache group and the SQL operation cannot use dynamic load.

With a value of 0, the SQL operation executes against whatever data is in the TimesTen cache tables and returns a result based on that data with no error indicated.

With a value of 1, any statement that cannot use dynamic load (even if it does not need dynamic load) fails with an error indicating that it is not dynamic load-compliant.

For more information on caching Oracle data in a TimesTen cache group, see Oracle In-Memory Database Cache User's Guide.

Note:
To override the value of this attribute at the statement level, set the DynamicLoadErrorMode optimizer flag with the ttOptSetFlag built-in procedure.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set DynamicLoadErrorMode as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

DynamicLoadErrorMode

0 (default) - Statements execute against the cached data with no error.
1 - Statements use dynamic load or fail with an error.

Windows ODBC Data Source Administrator

DynamicLoadErrorMode field

0 (default) - Statements execute against the cached data with no error.
1 - Statements use dynamic load or fail with an error.

OracleNetServiceName

The OracleNetServiceName attribute is used with the IMDB Cache.

This attribute identifies the Service Name for the Oracle instance

To cache Oracle tables and enable communication with Oracle, you must specify an Oracle Service Name.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set OracleNetServiceName as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

OracleNetServiceName

Character string specifying the Oracle Service Name that is to be used as the Oracle ID.

Windows ODBC Data Source Administrator

OracleNetServiceName field

Character string specifying the Oracle Service Name that is to be used as the Oracle ID.

OraclePWD

This attribute is used with IMDB Cache. It identifies the password for the user specified by UID to connect to the Oracle database to perform cache operations.

Required privilege

No privilege is required to set the value of this attribute.

Setting

This attribute must be set in the connection string. On Linux, suppose you have defined the following odbc.ini file:

[myDSN]
Datastore=/data/myDSN
PermSize=128
DatabaseCharacterSet=AL32UTF8
ConnectionCharacterSet=AL32UTF8

Set OraclePWD for user ttuser by connecting to myDSN as follows:

% ttisql

Copyright (c) 1996-2011, Oracle.  All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.

Command> connect "dsn=myDSN;OraclePWD=mypwd";
Connection successful:
DSN=beta4;UID=ttuser;DataStore=/data/myDSN;DatabaseCharacterSet=AL32UTF8;
ConnectionCharacterSet=AL32UTF8;PermSize=128;TypeMode=0;
(Default setting AutoCommit=1)
Command>

On Windows, set OraclePWD in the connection string in the same way that it is set on Linux.

See also

"UID and PWD"

PassThrough

This attribute is used with the IMDB Cache.

It specifies which SQL statements are executed only in the cache database and which SQL statements are passed through to the Oracle database. For more information about the IMDB Cache, see Oracle In-Memory Database Cache User's Guide and "CREATE CACHE GROUP" in Oracle TimesTen In-Memory Database SQL Reference.

The execution of a prepared PassThrough command assumes that the schema of dependent objects in the Oracle database has not changed since the prepare. If the schema has changed the PassThrough command may cause unexpected results from the Oracle database.

When passing SQL statements through to Oracle, use only TimesTen supported data types in column definitions. If the specified data type is not supported in TimesTen, the passthrough statement fails.

For information on changing the isolation level on the Oracle connection, when using this attribute, see "Isolation".

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set PassThrough as follows.

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

PassThrough

0 (default) - SQL statements are executed only on TimesTen.
1 - INSERT, UPDATE and DELETE statements are executed on TimesTen unless they reference one or more tables that are not in TimesTen. If they reference one or more tables not in TimesTen, they are passed through to the Oracle database. DDL statements are executed on TimesTen. Other statements are passed through to the Oracle database if they generate a syntax error in TimesTen or if one or more tables referenced within the statement are not in TimesTen.

2 - INSERT, UPDATE and DELETE statements performed on tables in read-only cache groups or user managed cache groups with the READONLY cache table attribute are passed through to the Oracle database. Passthrough behavior for other cache group types is the same as PassThrough=1.

3 - All statements are passed through to the Oracle database for execution, except that INSERT, UPDATE and DELETE statements issued on cache tables in a dynamic AWT global cache group result in a TimesTen error.

4 - SELECT statements issues on cache tables in a dynamic AWT global cache group that do not satisfy the criteria for a dynamic load query are passed through to the Oracle database for execution. Otherwise, statements are executed in the TimesTen database.

5 - SELECT statements issued on cache tables in a dynamic AWT global cache group that do not satisfy the criteria for a dynamic load query are passed through to the Oracle database for execution when all committed updates on cache tables in dynamic AWT global cache groups by previous transactions within the connection have been propagated to the Oracle database. Otherwise, statements are executed in the TimesTen database.

Windows ODBC Data Source Administrator

PassThrough List

0 (default) - SQL statements are executed only on TimesTen.
1 - INSERT, UPDATE and DELETE statements are executed on TimesTen unless they reference one or more tables that are not in TimesTen. If they reference one or more tables not in TimesTen, they are passed through to the Oracle database. DDL statements are executed on TimesTen. Other statements are passed through to the Oracle database if they generate a syntax error in TimesTen or if one or more tables referenced within the statement are not in TimesTen.

2 - INSERT, UPDATE and DELETE statements performed on tables in read-only cache groups or user managed cache groups with the READONLY cache table attribute are passed through to the Oracle database. Passthrough behavior for other cache group types is the same as PassThrough=1.

3 - All statements are passed through to the Oracle database for execution, except that INSERT, UPDATE and DELETE statements issued on cache tables in a dynamic AWT global cache group result in a TimesTen error.

4 - SELECT statements issues on cache tables in a dynamic AWT global cache group that do not satisfy the criteria for a dynamic load query are passed through to the Oracle database for execution. Otherwise, statements are executed in the TimesTen database.

5 - SELECT statements issued on cache tables in a dynamic AWT global cache group that do not satisfy the criteria for a dynamic load query are passed through to the Oracle database for execution when all committed updates on cache tables in dynamic AWT global cache groups by previous transactions within the connection have been propagated to the Oracle database. Otherwise, statements are executed in the TimesTen database.

Restrictions

Certain restrictions must be considered when using the passthrough feature. They include:

- If the PassThrough attribute is set so that a query must be executed in the Oracle database, the query is sent to the Oracle database without any changes. If the query uses a synonym for a table in a cache group, then a synonym with the same name must be defined for the corresponding Oracle table for the query to be successful.

- In the case that a SQL statement that uses TimesTen only syntax is passed through to the Oracle database, TimesTen returns an error message that indicates the syntax is not supported in Oracle.

- Execution of a prepared passthrough command assumes that the schema of dependent objects in the Oracle database have not changed after the prepare. If the schema has changed, unexpected results can occur.

- TimesTen does not include a cache invalidation feature. TimesTen does not verify that the cached tables are up to date. When a query is syntactically correct in TimesTen and the cache contains all the tables referenced in the query, the query is executed in TimesTen regardless of whether the cache is up to date.

- The passthrough of Oracle INSERT, UPDATE and DELETE operations depends on the setting of the PassThrough attribute as described in the table above. IMDB Cache cannot detect INSERT, UPDATE and DELETE operations that are hidden in a trigger or stored procedure. Therefore, TimesTen cannot enforce the passthrough rule on hidden operations.

- You cannot pass PL/SQL blocks through to the Oracle database.

- The effects of a passthrough INSERT, UPDATE or DELETE operation on a read-only cache group are only seen after the transaction is committed and after the next autorefresh operation is completed.

- There is no mechanism to detect or block updates on an Oracle table that is cached in a TimesTen synchronous writethrough cache group. Whether the updates are made by statements passed through the cache or from other Oracle applications, the changes are never reflected in IMDB Cache.

- Oracle Call Interface (OCI) does not support a mechanism to describe the binding type of the input parameters. Ensure that your application supplies the correct SQL types for passthrough statements. The ODBC driver converts the C and SQL types and presents the converted data and the SQL type code to TimesTen. TimesTen presents the information to OCI. The length of the input binding values is restricted to 4000 for LONG and LONG RAW types.

- At all passthrough levels, passthrough execution of DDL statements does not result in commits on the TimesTen side.

- A transaction that contains operations that are replicated with RETURN TWOSAFE cannot have a PassThrough setting greater than 0. If PassThrough is greater than 0, an error is returned and the transaction must be rolled back.

- When PassThrough is set to 0, 1, or 2, the following behavior occurs when a dynamic load condition exists:

- A dynamic load can occur for a SELECT operation on cache tables in any dynamic cache group type.

- A dynamic load for an INSERT, UPDATE or DELETE operation can only occur on cached tables with dynamic asynchronous or synchronous writethrough cache groups.

RACCallback

This attribute allows you to enable or disable the installation of Transparent Application Failover (TAF) and Fast Application Notification (FAN) callbacks when using Oracle Real Application Clusters (Oracle RAC) with IMDB Cache.

For more information about IMDB Cache, see Oracle In-Memory Database Cache User's Guide and "CREATE CACHE GROUP" in Oracle TimesTen In-Memory Database SQL Reference.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set RACCallback as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

RACCallback

0 - Do not install TAF and FAN callbacks.
1 (default) - Install the TAF and FAN callbacks.

Windows ODBC Data Source Administrator

RACCallback check box

unchecked - Do not install TAF and FAN callbacks.
checked (default) - Install the TAF and FAN callbacks.

TimesTen Client connection attributes

TimesTen Client connection attributes are used only when you are connecting to a TimesTen server from a TimesTen client application. TimesTen Client connection attributes are listed in Table 1-10, "Client connection attributes" and described in detail in this section.

In addition to the attributes listed in this section, some database attributes and general connection attributes are also available for client connections or impact the behavior of the connection. These attributes are:

- ConnectionCharacterSet

- ConnectionName

- UID and PWD

To view the value of client attributes, use the ODBC function SQLGetConnectOptions. To learn more about this function see "Option support for SQLSetConnectOption and SQLGetConnectOptions" section of the Oracle TimesTen In-Memory Database C Developer's Guide.

TCP_Port

When connecting to a TimesTen database using the TimesTen Client and Server, the TimesTen Client requires the network address and the TCP port number of the computer running the TimesTen Server. As a convenience, TimesTen allows you to define a logical server name that contains the network address and port number pair.

If you specify anything other than a logical server name for the TTC_Server attribute in the Client DSN definition, TimesTen Client assumes that the Server is running on the default TCP/IP port number. In such cases, if your Server is running on a port other than the default port, you must specify the port number in the ODBC connection string. For example:

"TTC_SERVER=server_host_name;TTC_SERVER_DSN=Server_DSN;TCP_PORT=server_port"

or

"DSN=Client_DSN;TCP_Port=server_port"

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TCP_Port as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs

TCP_Port

Specify the port number where the Server is listening.

Windows ODBC Data Source Administrator and UNIX ODBC.INI file

TimesTen does not support specifying this attribute directly in a UNIX ODBC.INI file or in the Windows ODBC Data Source Administrator. Alternatively, TCP_Port can be defined in the logical server name.

N/A

TCP_Port2

This attribute is used to specify the port number to use if an automatic failover occurs. See the description of TCP_Port for details on setting the value of this attribute and associated attributes.

See Oracle TimesTen In-Memory Database Operations Guide for more information on automatic client failover.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TCP_Port2 as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs

TCP_Port2

Specify the failover port number where the Server should listen.

Windows ODBC Data Source Administrator and UNIX ODBC.INI file

TimesTen does not support specifying this attribute directly in a UNIX ODBC.INI file or in the Windows ODBC Data Source Administrator. Alternatively, TCP_Port can be defined in the logical server name.

N/A

TTC_FailoverPortRange

Specifies a port range for the port that the automatic client failover thread listens on for failover notifications in an active/standby replication configuration. The failover configuration allows a client application to connect to a new active node automatically if there is a failure on the current node.

Specifying a port range helps accommodate firewalls between the client and server systems. By default, TimesTen uses a port chosen by the operating system.

Note:
Client failover is only supported when the client is part of an active/standby pair replication configurations.

See Oracle TimesTen In-Memory Database Operations Guide for more information on automatic client failover.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TTC_FailoverPortRange as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TTC_FailoverPortRange

Specify a lower value and an upper value for the port numbers in the format lowervalue-uppervalue.

Windows ODBC Data Source Administrator

Failover Port Range field

Specify a lower value and an upper value for the port numbers in the format lowervalue-uppervalue.

TTC_Server

When connecting to a TimesTen database using the TimesTen Client and Server, the TimesTen Client requires the specification of the network address and TCP port number of the computer running the TimesTen Server. As a convenience, TimesTen allows you to define a logical server name that contains the network address and port number pair. If you specify anything other than a logical server name for this attribute, TimesTen Client assumes that the Server is running on the default TCP/IP port number. In such cases, if your Server is running on a port other than the default port, you must specify the port number in the ODBC connection string. For example:

"TTC_SERVER=server_host_name;TTC_SERVER_DSN=Server_DSN;TCP_PORT=server_port"

or

"DSN=Client_DSN;TCP_Port=server_port"

Once the logical server name is defined, it can be used as the value for the TTC_Server attribute in a Client DSN. Therefore, multiple Client DSNs referencing the same computer that is running the TimesTen Server can use the same logical server name for the value of the TTC_Server attribute instead of having to specify repeatedly the same network address and port number within each of the Client DSNs.

Note:
TimesTen recommends that you specify a logical server name for the TTC_Server attribute. However, you can also specify a domain name server (DNS), host name or IP address for the TTC_Server attribute. If you do not use a logical server name and the TimesTen Server is listening on a non-default port number, you must provide the port number in the ODBC connection string. For example:

"TTC_SERVER=server_host_name;TTC_SERVER_DSN=Server_DSN;
TCP_PORT=server_port"

or

"DSN=Client_DSN;TCP_Port=server_port"

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TTC_Server as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TTC_Server

Character string specifying the logical server.

Windows ODBC Data Source Administrator

Server Name or Network Address field

Character string specifying the logical server.

TTC_Server2

This attribute is used to specify the logical server name to use if an automatic failover occurs. See the description of TTC_Server for details on setting the value of this attribute and associated attributes.

The value of this attribute can be the same as the value specified for TTC_Server if it is a virtual IP address.

If the client has already failed over and has connected to TTC_Server2 and the connection fails, it connects to TTC_Server. It alternately attempts to connect to TTC_Server and TTC_Server2 until the TTC_TIMEOUT attribute expires.

Note:
Client failover is only supported when the client is part of an active/standby pair replication configurations.

See Oracle TimesTen In-Memory Database Operations Guide for more information on automatic client failover.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TTC_Server2 as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TTC_Server2

Character string specifying the logical server to be used if an automatic failover occurs.

Windows ODBC Data Source Administrator

Server Name or Network Address 2 field

Character string specifying the logical server to be used if an automatic failover occurs.

TTC_Server_DSN

The TTC_Server_DSN attribute specifies a Server DSN on the computer running the TimesTen Server.

On Windows, Server DSNs are the set of TimesTen System DSNs that use the TimesTen Data Manager driver. Use the ODBC Data Source Administrator to define Server DSNs.

On UNIX, Server DSNs are defined in the /var/TimesTen/ instance/sys.odbc.ini file. More details on this topic can be found in the platform-specific sections.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TTC_Server_DSN as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TTC_Server_DSN

Character string specifying the DSN that resides on the Server.

Windows ODBC Data Source Administrator

Server DSN field

Character string specifying the DSN that resides on the Server.

TTC_Server_DSN2

This attribute is used to specify the Server DSN on the computer running the TimesTen Server. This is the Server DSN to be used if an automatic failover occurs. See the description of TTC_Server_DSN for details on setting the value of this attribute and associated attributes.

If a failover occurs, if the client cannot connect to TTC_Server_DSN or loses the connection to the DSN, it attempts to connect to TTC_Server_DSN2.

Note:
Client failover is only supported when the client is part of an active/standby pair replication configurations.

See Oracle TimesTen In-Memory Database Operations Guide for more information on automatic client failover.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TTC_Server_DSN2 as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TTC_Server_DSN2

Character string specifying the DSN that resides on the Server to be used if an automatic failover occurs.

Windows ODBC Data Source Administrator

Server DSN2 field

Character string specifying the DSN that resides on the Server to be used if an automatic failover occurs.

TTC_Timeout

The TTC_Timeout attribute sets a maximum time limit, in seconds, for a network operation that is completed by using the TimesTen Client and Server. The TTC_Timeout attribute also determines the maximum number of seconds a TimesTen Client application waits for the result from the corresponding TimesTen Server process before timing out.

The value of TTC_TIMEOUT is used in the OS select() call on the client side of a C/S connection. It is not used by SQLExecute() or OCIStmtExecute().

A value of 0 indicates that client/server operations should not timeout. Setting of this attribute is optional. If this attribute is not set, the default timeout period is 60 seconds. The maximum timeout period is 99,999 seconds. Upon timeout, the operation is interrupted, the Client application receives a timeout error and the connection is terminated. For example, if the Client application is running long queries, you may want to increase the timeout interval.

For active standby pair failover scenarios, the minimum value is 60 seconds.

If you are using PL/SQL, set the PLSQL_TIMEOUT value to a value that is at least 5 seconds less than TTC_TIMEOUT.

For certain queries, the client application may also set the SQL_QUERY_TIMEOUT ODBC statement option. The TimesTen Client ODBC Driver requires that SQL_QUERY_TIMEOUT must be less than TTC_TIMEOUT, unless the network timeout is set to 0. In that case, the network operation does not timeout.

The query timeout can be set using the SQLSetConnectOption ODBC call before a connection is established to the database using either the SQLConnect or SQLDriverConnect ODBC calls. Alternatively, the query timeout can be set by calling either the SQLSetConnectOption or SQLSetStmtOption ODBC calls after a connection is established to the database.

When the query timeout is set before establishing a connection to the database, the client driver does not know the network timeout value at that point. Hence, later, at connect time, the client driver silently sets the query timeout to a value slightly smaller than the network timeout value if the following are true:

- The network timeout value is greater than 0.

- The query timeout value was 0, or greater than or equal to the network timeout value.

The timeout value can be set after establishing a connection by calling the ttIsql clienttimeout command. When the query timeout is set after establishing a connection to the database, the client driver returns an error if the network timeout value is greater than 0, and the query timeout value greater than or equal to the network timeout value. The SQLState is set to S1000.

This attribute is not supported when shared memory is used for Client/Server inter-process communication. If set, TimesTen ignores the attribute.

Required privilege

No privilege is required to change the value of this attribute.

Setting

Set TTC_Timeout as follows.

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

TTC_Timeout

A value between 0 and 99999 that represents the number of seconds that the TimesTen Client waits for a connection before timing out. (The default value is 60.) In an active standby pair failover scenario, the minimum value is 60.

Windows ODBC Data Source Administrator

Timeout Interval field

A value between 0 and 99999 that represents the number of seconds that the TimesTen Client waits for a connection before timing out. (The default value is 60.) In an active standby pair failover scenario, the minimum value is 60.

Server connection attributes

Server connection attributes are specified in the Server DSN only and are read at first connection. See "Defining Server DSNs" in Oracle TimesTen In-Memory Database Operations Guide. The attributes are used to set the number of connections to a TimesTen server, the number of servers for each DSN and the size of each connection to the server. These attributes allow you to specify multiple client connections to a single Server. By default, TimesTen creates only one connection to a Server per child process.

Note:
These attributes must be specified in the DSN. If these attributes are specified in a connection string, TimesTen ignores them and their values.

There are also TimesTen main daemon options that can be used to specify multiple Server connections. In the case that both the daemon options and these attributes have been specified, the value of the attributes takes precedence.

Server connection attributes are listed in Table 1-11, "Server connection attributes" and described in detail in this section.

MaxConnsPerServer

The MaxConnsPerServer attribute sets the maximum number of concurrent connections to the server which the DSN references.

If you want to support many connections to the Server, you must make sure that the per-process file descriptor limit for the UID that TimesTen is being run as is set to a value somewhat more than the number of concurrent child servers that are active. This is the number of anticipated concurrent client connections divided by MaxConnsPerServer.

The value of this attribute takes precedence over the setting of the value of the-maxConnsPerDSN option in the ttendaemon.options file. For details, see "Specifying multiple connections to the TimesTen Server" in Oracle TimesTen In-Memory Database Operations Guide.

For limits on the maximum number of connections to a TimesTen database, see Chapter 4, "System Limits".

Changes to TimesTen Server settings do not occur until the TimesTen server is restarted. To restart the Server, use the command ttDaemonAdmin -restartserver.

Required privilege

Only a user with operating system privileges on the system DSN in which this attribute is defined can change the value of this attribute to a value other than the one currently in effect.

Setting

Set MaxConnsPerServer as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

MaxConnsPerServer

A value between 1 and 2047. The default is 1.

Windows ODBC Data Source Administrator

Maximum Connections Per Server Process field

A value between 1 and 2047. The default is 1.

ServersPerDSN

The ServersPerDSN attribute specifies the number of DSNs that can connect to a Server DSN at any given time.

The value of this attribute is only meaningful if the value of MaxConnsPerServer is greater than one. If there is only one connection per Server, the child server uses the process' main stack.

This value of this attribute takes precedence over the setting of the value of the -serversPerDSN option in the ttendaemon.options file. For details, see "Specifying multiple connections to the TimesTen Server" in Oracle TimesTen In-Memory Database Operations Guide.

Changes to TimesTen Server settings do not occur until the TimesTen server is restarted. To restart the Server, use the command ttDaemonAdmin -restartserver.

Required privilege

Only a user with operating system privileges on the system DSN in which this attribute is defined can change the value of this attribute to a value other than the one currently in effect.

Setting

Set ServersPerDSN as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ServersPerDSN

A value between 1 and 2047. The default is 1.

Windows ODBC Data Source Administrator

Server Processes Per DSN field

A value between 1 and 2047. The default is 1.

ServerStackSize

The ServerStackSize attribute value determines the size of the stack on the Server for each connection. The value of this attribute is only meaningful if the value of MaxConnsPerServer is greater than one. If there is only one connection per Server, the child server uses the process' main stack. It is also platform-dependent, as defined in the setting below.

This value of this attribute takes precedence over the setting of the -serverStackSize option in the ttendaemon.options file. For details, see "Specifying multiple connections to the TimesTen Server" in Oracle TimesTen In-Memory Database Operations Guide.

Changes to TimesTen Server settings do not occur until the TimesTen server is restarted. To restart the Server, use the command ttDaemonAdmin -restartserver.

Required privilege

Only a user with operating system privileges on the system DSN in which this attribute is defined can change the value of this attribute to a value other than the one currently in effect.

Setting

Set ServerStackSize as follows:

Where to set the attribute

How the attribute is represented

Setting

C or Java programs or UNIX ODBC.INI file

ServerStackSize

Valid values depend on the platform. The default is 128KB for 32-bit platforms and 256KB for 64-bit platforms.
If the sysconf call is available, the minimum is:

sysconf(_SC_TEAD_STACK_MIN)/ 1024

else 0

If the getrlimit call is available, the maximum value is:

getrlimit(RLIMIT_STACK, &r1);

r1.rlim_cur /1024

else 4096

The default is 128KB for 32-bit platforms and 256KB for 64-bit platforms.

Windows ODBC Data Source Administrator

Server Stack Size field

Valid values depend on the platform. The default is 128KB for 32-bit platforms and 256KB for 64-bit platforms.
If the sysconf call is available, the minimum is:

sysconf(_SC_TEAD_STACK_MIN)/ 1024

else 0

If the getrlimit call is available, the maximum value is:

getrlimit(RLIMIT_STACK, &r1);

r1.rlim_cur /1024

else 4096

2 Built-In Procedures

TimesTen built-in procedures extend standard ODBC and JDBC functionality. You can invoke these procedures using the ODBC or JDBC procedure call interface. The procedure takes the position of the SQL statement, as illustrated in the following examples.

The following ODBC call tells the optimizer that it should not generate temporary hash indexes when preparing commands:

SQLExecDirect (hstmt, (SQLCHAR*)
"{CALL ttOptSetFlag ('TmpHash', 0)}", SQL_NTS);

This is the equivalent JDBC call:

CallableStatement cstmt = con.prepareCall
("{CALL ttOptSetFlag ('TmpHash', 0)}");
cstmt.execute();

TimesTen built-in procedures can also be called from PL/SQL using the EXECUTE IMMEDIATE statement with CALL, as illustrated in the following example.

For example, to call the built-in procedure ttConfiguration, create a PL/SQL record type and then SELECT INTO that record type. Because ttConfiguration returns multiple rows, use BULK COLLECT.

Command> DECLARE
>   TYPE ttConfig_record IS RECORD
>      (name varchar2(255), value varchar2 (255));
>   TYPE ttConfig_table IS TABLE OF ttConfig_record;
> v_ttConfigs ttConfig_table;
> BEGIN
>  EXECUTE IMMEDIATE  'CALL ttConfiguration'
>   BULK COLLECT into v_ttConfigs;
>  DBMS_OUTPUT.PUT_LINE ('Name: ' || v_ttConfigs(1).name
>    || ' Value: ' || v_ttConfigs(1).value);
> end;
> /
Name: CacheGridEnable Value: 0

PL/SQL procedure successfully completed.

Note:
String parameter values for built-in procedures must be single-quoted as indicated in these examples, unless the value is NULL.

ttAgingLRUConfig

Description

This procedure sets the Least Recently Used (LRU) aging attributes on all regular tables that have been defined with an LRU aging policy. For cache tables, the aging policy is defined on the root table but applies to all tables in the cache group. The aging policy is defined on tables when they are created or altered, using the CREATE TABLE or ALTER TABLE SQL statements.

The LRU aging feature helps applications maintain the usage size of the database under a specified threshold by removing the least recently used data.

Data is removed if the database space in-use exceeds the specified threshold values. For cache groups, aging is defined at the root table for the entire cache instance. LRU aging cannot be specified on a cache group with the AUTOREFRESH attribute, unless the cache group is dynamic. For explicitly loaded cache groups with the AUTOREFRESH attribute, use time-based aging.

Required privilege

This procedure requires no privilege to query the current values. It requires the ADMIN privilege to change the current values.

Syntax

ttAgingLRUConfig(LowUsageThreshHold, HighUsageThreshHold, AgingCycle)

Parameters

ttAgingLRUConfig has these optional parameters:

Parameter

Type

Description

lowUsageThreshold

BINARY_FLOAT

Sets, displays or resets the low end of percentage of database PermSize, specified in decimals. The bottom of the threshold range in which LRU aging should be deactivated. Default is 80%.

highUsageThreshold

BINARY_FLOAT

Sets, displays or resets the high end of percentage of database PermSize, specified in decimals. The top of the threshold range in which LRU aging should be activated. Default is 90%.

agingCycle

TT_INTEGER

Sets, displays or resets the number of minutes between aging cycles, specified in minutes. Default is 1 minute. If you use this procedure to change the aging cycle, the cycle is reset based on the time that this procedure is called. For example, if you call this procedure at 12:00 p.m. and specify a cycle of 15 minutes, aging occurs at 12:15, 12:30, 12:45, etc.

Result set

ttAgingLRUConfig returns these results:

Column

Type

Description

lowUsageThreshold

BINARY_FLOAT NOT NULL

The current setting for the low end of percentage of database PermSize, specified in decimals.

highUsageThreshold

BINARY_FLOAT NOT NULL

The current setting for the high end of percentage of database PermSize, specified in decimals.

agingCycle

TT_INTEGER NOT NULL

The current setting for the number of minutes between aging cycles, specified in minutes.

Examples

To set the aging threshold to a low of 75 percent and a high of 95 percent and the aging cycle to 5 minutes, use:

CALL ttAgingLRUConfig (.75, .90, 5);
<.7500000, .9000000, 5>

To display the current LRU aging policy for all tables that defined with an LRU aging policy, call ttAgingLRUConfig without any parameters:

Call ttAgingLRUConfig();

If the tables are defined with the default thresholds and aging cycle, the procedure returns:

<.8000000, .9000000, 1>
1 row found.

To change the low usage threshold to 60%, the aging cycle to 5 minutes and to retain the previous high usage threshold, use:

Call ttAgingLRUConfig (60,,5);
< .6000000, .9000000, 5 >
1 row found.

Notes

The values of this procedure are persistent, even across system failures.

If no parameters are supplied, this procedure only returns the current LRU aging attribute settings.

See also

ttAgingScheduleNow
Oracle In-Memory Database Cache User's Guide

ttAgingScheduleNow

Description

This procedure starts the aging process, regardless of the value of the aging cycle. The aging process begins right after the procedure is called unless there is an aging process in progress. In that case, the new aging process begins when the aging process that was in process at the time the built-in was called has completed.

Aging occurs only once when you call this procedure. This procedure does not change any aging attributes. The previous aging state is unchanged. For example, if aging state is OFF when you call ttAgingScheduleNow, the aging process starts. When aging is complete, if your aging state is OFF, aging does not continue. To continue aging, you must call ttAgingScheduleNow again or change the aging state to ON, in which case aging occurs next based on the value of the aging cycle.

For tables with aging ON, the aging cycle is reset to the time when ttAgingScheduleNow was called. For example, if you call this procedure at 12:00 p.m. and the aging cycle is 15 minutes, aging occurs immediately and again at 12:15, 12:30, 12:45, etc.

If used in an external scheduler, such as a cron job, or executed manually, this procedure starts the aging process at the time the procedure is executed, if there is no aging process in progress, or as soon as the current aging process has completed. In the case that you want aging to occur only when the external scheduler executes the ttAgingScheduleNow procedure or you call it manually, set the aging state to OFF.

Aging is performed by a background thread that wakes up every second to check if any work must be done. Calling ttAgingScheduleNow only guarantees that the aging thread works on the specified tables within the next second, at best. If the aging thread is working on a different table at the time the built-in procedure is called, it may take some time to reach the specified table. The rows are visible until the aging thread commits the delete.

Required privilege

This procedure requires the DELETE privilege on the table being aged, or the DELETE ANY TABLE privilege when you do not specify a table.

Syntax

ttAgingScheduleNow ('tblname')

Parameters

ttAgingScheduleNow has the parameter:

Parameter

Type

Description

tblname

TT_CHAR (61)

The name of the table on which to start the aging process.
If tblName is omitted, the aging process is started on all tables defined with any aging policy.

Using a synonym to specify a table name is not supported.

Result set

ttAgingScheduleNow returns no results.

Examples

To schedule aging on all tables, including tables defined with both LRU aging and time-based aging, call ttAgingScheduleNow without any parameter values:

CALL ttAgingScheduleNow ();

This examples creates the table agingex with time-based aging policy and the aging state set to OFF. ttAgingScheduleNow is called, using the ttIsql utility, to start the aging process once. Rows are deleted from the table. After ttAgingScheduleNow is called, the aging state remains OFF. To continue aging, alter the table and set the aging state to OFF.

Command> CREATE TABLE agingex (col1 TT_INTEGER PRIMARY KEY NOT NULL,
ts TIMESTAMP NOT NULL)
AGING USE ts LIFETIME 1 MINUTES CYCLE 30 MINUTES OFF;

Command> DESCRIBE agingex;

Table TTUSER.AGINGEX:
Columns:
*COL1             TT_INTEGER NOT NULL
TS               TIMESTAMP (6) NOT NULL
Aging use TS lifetime 1 minute cycle 30 minutes off
1 table found.
(primary key columns are indicated with *)

Command> INSERT INTO agingex VALUES (1, SYSDATE);
1 row inserted.

Command> INSERT INTO agingex VALUES (2, SYSDATE);
1 row inserted.

Command> SELECT * FROM agingex;

< 1, 2011-03-25 13:06:29.000000 >
< 2, 2011-03-25 13:06:42.000000 >
2 rows found.

Command> CALL ttAgingScheduleNow ('agingex');

Command> SELECT * FROM agingex;
0 rows found.

See also

ttAgingLRUConfig
Oracle In-Memory Database Cache User's Guide

ttApplicationContext

Description

This procedure sets application-defined context for the next update record (either an UPDATE or commit) in order to pass application specific data to XLA readers.

Required privilege

This procedure requires no privilege.

Syntax

ttApplicationContext (cmd)

Parameters

ttApplicationContext has the parameter:

Parameter

Type

Description

cmd

VARBINARY(16384) NOT NULL

Context information to be passed.

Result set

ttApplicationContext returns no results.

Example

CALL ttApplicationContext (0x123);

See also

"XLA Reference" in Oracle TimesTen In-Memory Database C Developer's Guide

ttBackupStatus

Description

This procedure returns a single row with information about the current or last backup of the database. If a backup is in progress, this information represents the current backup. If no backup is in progress, this information represents the last backup taken.

If no backup has been taken on the database since the last first-connect, the status field is 0 and the rest of the columns are NULL.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttBackupStatus ()

Parameters

ttBackupStatus has no parameters.

Result set

ttBackupStatus returns the results:

Column

Type

Description

status

TT_INTEGER NOT NULL

An INTEGER code representing the current progress of a backup or the completion status of the last backup. Values are:
0 - No backup has been taken on the database since the last first-connect.

1 - A backup is currently in progress.

2 - The last backup completed successfully.

3 - The last backup failed. In this case the error column contains the error code for the failure.

destination

TT_INTEGER

The type of backup taken. The value is NULL when no backup has been taken on the database. Value is one of:
0 - Backup is/was being written to a file.

1 - Backup is/was being written to a stream.

2 - Backup is/was taken on behalf of replication duplicate.

backupType

TT_INTEGER

Backup type, either full or incremental. The value is NULL when no backup has been taken on the database. Value is one of:
0 - Incremental backup.

1 - Full backup.

startTime

TT_TIMESTAMP

Time when the backup was started. The value is NULL when no backup has been taken on the database.

endTime

TT_TIMESTAMP

Time when the backup completed. If NULL and startTime is non-NULL, a backup is currently in progress.

backupLFN

TT_INTEGER

The transaction log file number of the backup point. The value is NULL when no backup has been taken on the database.

backupLFO

TT_BIGINT

The transaction log file offset of the backup point. The value is NULL when no backup has been taken on the database.

error

TT_INTEGER

If a backup fails, this column indicates the reason for the failure. The value is one of the TimesTen error numbers. The value is NULL when no backup has been taken on the database.

processId

TT_INTEGER

The ID of the process or daemon performing the backup (if known).

Example

CALL ttBackupStatus ();
< 2, 2, 1, 2005-08-12 13:10:32.587557, 2005-08-12 13:10:33.193269, 1, 1531840, 0, 6968 >
1 row found.

Notes

Does not return information about previous backups, other than the current or last one.

Information returned is not persistent across database startup or shutdown.

ttBlockInfo

Description

This procedure provides information about perm blocks and the amount of block-level fragmentation in a database.

Required privilege

This procedure requires no privilege.

Syntax

ttBlockInfo()

Parameters

ttBlockInfo has no parameters.

Result set

ttBlockInfo returns the result set:

Column

Type

Description

TotalBlocks

TT_BIGINT NOT NULL

Total number of blocks in the database.

FreeBlocks

TT_BIGINT NOT NULL

Total number of free blocks in the database.

FreeBytes

TT_BIGINT NOT NULL

Total size of the free blocks.

LargestFree

TT_BIGINT NOT NULL

Size of the largest free block.

Examples

CALL ttBlockInfo();
< 288, 3, 128711700, 128698596 >
1 row found.

ttBookmark

Description

This procedure returns information about the TimesTen transaction log. Records in the transaction log are identified by pairs of integers:

- A transaction log file number

- An offset in that transaction log file

Transaction log file numbers correspond to the file system names given to transaction log files. For example, the transaction log file SalesData.log29 has the transaction log file number 29.

Three log records are identified in the result row of ttBookmark:

- The identity of the most recently written log record

- The identity of the log record most recently forced to the disk

- The replication bookmark. The replication bookmark is the oldest log record that represents an update not yet replicated to another system

Required privilege

This procedure requires no privilege.

Syntax

ttBookmark()

Parameters

ttBookmark has no parameters.

Result set

ttBookmark returns the result set:

Column

Type

Description

writeLFN

TT_INTEGER

Last written transaction log file.

writeLFO

TT_BIGINT

Last written offset in transaction log file.

forceLFN

TT_INTEGER

Last transaction log file forced to disk.

forceLFO

TT_BIGINT

Offset of last transaction log file forced to disk.

holdLFN

TT_INTEGER

Replication bookmark transaction log file.

holdLFO

TT_BIGINT

Replication bookmark log offset.

Example

CALL ttBookmark ();

ttCacheAutorefresh

Description

This procedure starts an immediate autorefresh on the set of cache groups that are associated by sharing the same autorefresh interval with the specified cache group. This set of associated cache groups would normally be refreshed together automatically. The effect on the autorefresh process is the same as that of adding a new cache group with the same refresh interval as that of the specified cache group. This procedure is useful if updates have occurred on the Oracle database and you would like to refresh them on the cache group before the next scheduled autorefresh.

If there is an existing transaction with locks on table objects that belong to the set of cache groups to be autorefreshed, this procedure returns an error without taking any action. This procedure establishes a condition that requires that you commit or rollback before you can perform other work in the session.

Required privilege

This procedure requires the CACHE_MANAGER or ADMIN privilege.

Syntax

ttCacheAutorefresh ('cacheGroupOwner', 'cacheGroupName', synchronous)

Parameters

ttCacheAutorefresh has the parameters:

Parameter

Type

Description

cacheGroupOwner

VARCHAR2 (30)

Name of the cache group owner.

cacheGroupName

VARCHAR2 (30) NOT NULL

Name of the cache group.

synchronous

TT_INTEGER

Species whether data is updated on synchronously or asynchronously.
0 or NULL - Asynchronous mode. The procedure returns immediately.

1 - Synchronous mode. The procedure returns after the refresh operation has completed on all associated cache groups.

Result set

ttCacheAutorefresh returns no results.

Example

This example autorefreshes the testcache cache group and all cache groups with the same autorefresh interval. The procedure returns synchronously.

Command> call ttcacheautorefresh('user1','testcache', 1);

Notes

The specified cache group AUTOREFRESH state must be ON. While, other associated cache groups can be in any state, they are not refreshed if they are not in the autorefresh ON state.An autorefresh of the specified associated cache groups cannot be in progress.You cannot call this procedure on the standby node of an active standby pair.

This procedure is available only for IMDB Cache.

ttCacheAutorefreshStatsGet

Description

This procedure returns information about the last ten autorefresh transactions on the specified cache group. This information is only available when the AUTOREFRESH state is ON or PAUSED, and the cache agent is running.

The information returned by this built-in procedure is reset whenever:

- The cache agent is restarted.

- The state is set to OFF and then back to ON or PAUSED.

- The cache group is dropped and recreated.

Required privilege

This procedure requires no privilege.

Syntax

ttCacheAutorefreshStatsGet ('cacheGroupOwner', 'cacheGroupName')

Parameters

ttCacheAutorefreshStatsGet has the parameters:

Parameter

Type

Description

cacheGroupOwner

VARCHAR2 (30)

Name of the cache group owner.

cacheGroupName

VARCHAR2 (30) NOT NULL

Name of the cache group for which autorefresh information should be returned.

Result set

The ttCacheAutorefreshStatsGet built-in procedure returns only a subset of column information for a cache group with autorefresh mode FULL. A column value of 0 returns for information that is not available.

ttCacheAutorefreshStatsGet returns the results:

Column name

Column type

Description

Returned for full autorefresh

cgId

TT_BIGINT

The cache group ID.

Y

startTimestamp

TT_TIMESTAMP

Timestamp when autorefresh started for this interval. See "Notes" below.

Y

cacheAgentUpTime

TT_BIGINT

Number of cache agent clock ticks in milliseconds at the time the autorefresh transaction started for this interval. This value is cumulative and is reset when the cache agent process starts. See "Notes" below.

Y

autorefNumber

TT_BIGINT

Autorefresh number for a cache group indicates the number of times this cache group has been incrementally refreshed since the cache agent started. This number will be initialized to 0 when the cache agent is started.

Y

autorefDuration

TT_BIGINT

The number of milliseconds spent in this autorefresh transaction.

Y

autorefNumRows

TT_BIGINT

The number of rows autorefreshed in this autorefresh. This includes all rows, including those in the root table and the child tables.
If there are cache groups with multiple tables, child table rows get updated multiple times. Therefore, the number of rows autorefreshed may be more than number of rows updated on Oracle.

N

numOracleBytes

TT_BIGINT

The number of bytes transferred from Oracle in this autorefresh transaction.

N

autorefNumRootTblRows

TT_BIGINT

The number of root table rows autorefreshed in this autorefresh transaction.

Y

autorefQueryExecDuration

TT_BIGINT

The duration in milliseconds that it takes for the autorefresh query to execute on Oracle.

N

autorefQueryFetchDuration

TT_BIGINT

The duration in milliseconds that it takes for the autorefresh query to fetch rows from Oracle.

N

autorefTtApplyDuration

TT_BIGINT

The duration in milliseconds that it takes for TimesTen to apply the autorefresh.

N

totalNumRows

TT_BIGINT

The total number of rows autorefreshed since the cache agent started.
The total number of rows autorefreshed may not be the same as number of rows updated on Oracle. This is because of a delay in marking the log; some updates may get autorefreshed and counted multiple times.

N

totalNumOracleBytes

TT_BIGINT

The total number of bytes transferred from Oracle since the cache agent started.

N

totalNumRootTblRows

TT_BIGINT

The total number of root table rows autorefreshed since the cache agent started.

Y

totalDuration

TT_BIGINT

The total autorefresh duration in milliseconds since the cache agent started.

Y

status

VARCHAR2 (128)

A string description of the status of the current autorefresh. See "Notes" below. Supported values for this field are:
Complete

inProgress

Failed

Y

numlogrows

TT_BIGINT

Number of rows fetched from the Oracle database in this autorefresh.

Y

totalnumlogrows

TT_BIGINT

The cumulative number of rows fetched from the Oracle database in this autorefresh.

Y

Example

In this example, testcache is a READONLY cache group with one table and an incremental autorefresh interval of 10 seconds.

Command> call ttcacheautorefreshstatsget('user1','testcache');

< 1164260, 2011-07-23 15:43:52.000000, 850280, 44, 0, 75464, 528255, 75464, 310,
110, 6800, 1890912, 12439795, 1890912, 160020, InProgress, 2, 74 >
< 1164260, 2011-07-23 15:43:33.000000, 831700, 43, 13550, 108544, 759808, 108544,
1030, 230, 12290, 1815448, 11911540, 1815448, 160020, Complete, 2, 72 >
< 1164260, 2011-07-23 15:43:12.000000, 810230, 42, 17040, 115712, 809984, 115712,
610, 330, 16090, 1706904, 11151732, 1706904, 146470, Complete, 2, 70>
< 1164260, 2011-07-23 15:42:52.000000, 790190, 41, 14300, 94208, 659456,
94208,560, 320, 13410, 1591192, 10341748, 1591192, 129430, Complete, 2, 68 >
< 1164260, 2011-07-23 15:42:32.000000, 770180, 40, 12080, 99328, 695296,
99328,450, 290, 11340, 1496984, 9682292, 1496984, 115130, Complete, 2, 66 >
< 1164260, 2011-07-23 15:42:12.000000, 750130, 39, 10380, 86016, 598368,
86016,430, 230, 9720, 1397656, 8986996, 1397656, 103050, Complete, 2, 64 >
< 1164260, 2011-07-23 15:41:52.000000, 730130, 38, 13530, 112640, 700768, 112640,
530, 220, 12780, 1311640, 8388628, 1311640, 92670, Complete, 2,62 >
< 1164260, 2011-07-23 15:41:32.000000, 710120, 37, 9370, 56320, 326810, 56320,
310, 160, 8900, 1199000, 7687860, 1199000, 79140, Complete, 2, 60 >
< 1164260, 2011-07-23 15:41:22.000000, 700120, 36, 2120, 10240, 50330, 10240, 50,
200, 1870, 1142680, 7361050, 1142680, 69770, Complete, 2, 58 >
< 1164260, 2011-07-23 15:41:12.000000, 690110, 35, 0, 0, 0, 0, 0, 0, 0, 1132440,
7310720, 1132440, 67650, Complete, 2, 56 >
10 rows found.

Notes

Most of the column values reported above are collected at the cache group level. For example, autorefDuration and autorefNumRows only include information for the specified cache group. Exceptions to this rule are column values cacheAgentUpTime, startTimestamp and autorefreshStatus. These values are reported at the autorefresh interval level.

StartTimestamp is taken at the beginning of the autorefresh for the autorefresh interval. A cache group enters the "in progress" state as soon as the autorefresh for the interval starts. It is not marked "complete" until the autorefresh for all cache groups in the interval are complete.

This procedure is available only for IMDB Cache.

ttCacheAwtMonitorConfig

Description

This procedure enables monitoring to determine the amount of time spent in each component of the workflow of an AWT cache group. To display the monitoring results, use the ttRepAdmin utility with the -awtmoninfo and -showstatus commands.

If the replication agent is restarted, monitoring is turned off. Setting the monitoring state to OFF resets the internal counters of the monitoring tool.

Run this procedure on the replication node that is replicating AWT changes to Oracle. If the active standby pair is functioning normally, the node replicating AWT changes is the standby. If the active is operating stand alone, the node replicating AWT changes is the active.

If a failure occurs on the node where the active database resides, the standby node becomes the new active node. In that case you would run this procedure on the new active node.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCacheAWTMonitorConfig ('state', samplingRate)

Parameters

ttCacheAWTMonitorConfig has the parameters:

Parameter

Type

Description

state

TT_CHAR(10)

Enables and disables AWT monitoring. Its value can be ON or OFF. Default is OFF

samplingRate

TT_INTEGER

Positive integer that specifies the frequency with which the AWT workflow is sampled. If samplingRate is set to 1, every AWT operation is monitored. Greater values indicate less frequent sampling. The value recommended for accuracy and performance is 16. If state is set to ON, the default for samplingRate is 16. If state is set to OFF, the default for samplingRate is 0.

Result set

ttCacheAWTMonitorConfig returns the following result if you do not specify any parameters. It returns an error if the replication agent is not running or if an AWT cache group has not been created.

Column

Type

Description

State

TTVARCHAR (10) NOT NULL

Current state of AWT monitoring. The value can be ON or OFF.

AWTSamplingFactor

TT_INTEGER NOT NULL

Positive integer that specifies the frequency with which the AWT workflow is sampled.

Examples

Example 2-1

Retrieve the current state and sampling factor when monitoring is disabled.

Command> CALL ttCacheAwtMonitorConfig;
< OFF, 0 >
1 row found.

Example 2-2

Enable monitoring and set the sampling frequency to 16.

Command> CALL ttCacheAwtMonitorConfig ('ON', 16);
< ON, 16 >
1 row found.

Example 2-3

Disable monitoring.

Command> CALL ttCacheAwtMonitorConfig; ('OFF')
< OFF, 0 >
1 row found.

See also

"ttRepAdmin"

ttCacheAWTThresholdGet

Description

This procedure returns the current transaction log file threshold for databases that include AWT cache groups.

Required privilege

This procedure requires no privilege.

Syntax

ttCacheAWTThresholdGet()

Parameters

ttCacheAWTThresholdGet has no parameters.

Result set

ttCacheAWTThresholdGet returns the result:

Column

Type

Description

threshold

TT_INTEGER NOT NULL

The number of transaction log files for all AWT cache groups associated with the database. If the result is 0, there is no set limit.

Example

CALL ttCacheAWTThresholdGet();

Note

This procedure is available only for IMDB Cache.

See also

ttCacheAWTThresholdSet

ttCacheAWTThresholdSet

Description

This procedure sets the threshold for the number of transaction log files that can accumulate before AWT is considered either terminated or too far behind to catch up. This setting applies to all subscribers to the database. When the threshold is exceeded, updates are no longer sent to Oracle. If no threshold is set then the default is zero.

Using this built-in procedure, the threshold can be set after an AWT cache group has been created.

This setting can be overwritten by a CREATE REPLICATION statement that resets the Log Failure Threshold for the database.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCacheAWTThresholdSet(threshold)

Parameters

ttCacheAWTThresholdSet has the parameter:

Parameter

Type

Description

threshold

TT_INTEGER

Specifies the number of transaction log files for all AWT cache groups associated with the database. If the threshold is NULL, the log failure threshold is set to zero.

Result set

ttCacheAWTThresholdSet returns no results.

Example

To set the threshold to allow 12 transaction log files to accumulate, use:

CALL ttCacheAWTThresholdSet(12);

Notes

This procedure is available for Oracle In-Memory Database Cache.

The user is responsible to recover when the threshold is exceeded.

See also

ttCacheAWTThresholdGet

ttCacheConfig

Description

For all cache groups that cache data from the same Oracle instance, this procedure specifies a timeout value and recovery policies in the case that the Oracle Server is unreachable and the cache agent or database is considered terminated.

The automatic refresh state of the database and cache groups can be determined from the procedure ttCacheDbCgStatus.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCacheConfig(Param, tblOwner, tblName, Value)

Parameters

ttCacheConfig has these parameters:

Parameter

Type

Description

Param

VARCHAR2(50) NOT NULL

Specifies the parameter to be set by Value:

- AgentTimeout - Number of seconds before a database is declared terminated if the cache agent cannot connect to the Oracle server.

- DeadDbRecovery - Specifies the type of autorefresh recovery when the cache agent restarts.

- TblSpaceFullRecovery - Specifies the action that TimesTen takes when the cached Oracle table is updated and the cache administration user's tablespace is full.

- TblSpaceThreshold - Specifies the cache administration user's tablespace usage warning threshold as a percentage.

tblOwner

VARCHAR2(30)

Specifies the owner of the cached Oracle table.
This parameter is required if Param is set TblspaceFullRecovery. Do not specify tblOwner for other values of Param.

A synonym cannot be used to specify a table name.

tblName

VARCHAR2(30)

Specifies the name of the cached Oracle table.
This parameter is required if Param is set TblspaceFullRecovery. Do not specify tblOwner for other values of Param.

Using a synonym to specify a table name is not supported.

Value

VARCHAR2(200)

Specifies the value to be set for Param.

- When Param is AgentTimeout, it specifies the number of seconds before a database is declared terminated if the cache agent cannot connect to the Oracle server. The default is 0, which means that the database is never declared terminated.

- When Param is DeadDbRecovery, the value can be Normal or Manual. Normal specifies a full automatic refresh. Manual specifies that REFRESH CACHE GROUP statement must be issued. The default is Normal.

- When Param is TblSpaceFullRecovery, the value can be Reload or None. Reload specifies that rows are deleted from the change log table and a full automatic refresh is performed. None specifies that an Oracle error is returned when the cached Oracle table is updated. The default is Reload.

- When Param is TblSpaceThreshold, the value can be 0 to 100. The default is 0, which means no warning is returned regardless of the tablespace usage.

Result set

ttCacheConfig returns no results when it is used to set parameter values. When it is used to return parameter settings, it returns the following results.

Column

Type

Value

Param

VARCHAR2(50)

Parameter name:
AgentTimeout

DeadDbRecovery

TblSpaceFullRecovery

TblSpaceThreshold

tblOwner

VARCHAR2(30)

Owner of the cached Oracle table.

tblName

VARCHAR2(30)

Name of the cached Oracle table.
Using a synonym to specify a table name is not supported.

Value

VARCHAR2(200)

Specifies the value set for Param.

- When Param is AgentTimeout, it specifies the number of seconds before a database is declared terminated if the cache agent cannot connect to the Oracle server.

- When Param is DeadDbRecovery, the value can be Normal or Manual.

- When Param is TblSpaceFullRecovery, the value can be Reload or None.

- When Param is TblSpaceThreshold, the value can be 0 to 100.

Examples

To set the cache agent timeout to 600 seconds (10 minutes), enter:

CALL ttCacheConfig('AgentTimeout',,,'600');

To determine the current cache agent timeout setting, enter:

CALL ttCacheConfig('AgentTimeout');
< AgentTimeout, <NULL>, <NULL>, 600 >
1 row found.

To set the recovery method to Manual for cache groups whose automatic refresh status is dead, enter:

CALL ttCacheconfig('DeadDbRecovery',,,'Manual');

Configure the IMDB cache to prevent an automatic full refresh and receive an Oracle error when there is an update on a cached Oracle table while the cache administration user's tablespace is full. The Oracle table is terry.customer.

CALL ttCacheConfig('TblSpaceFullRecovery','terry','customer','None');

To determine the current setting for TblSpaceFullRecovery on the terry.customer cached Oracle table, enter:

CALL ttCacheConfig('TblSpaceFullRecovery','terry','customer');
< TblSpaceFullRecovery, TERRY, CUSTOMER, none >
1 row found.

To configure a warning to be returned when the cache administration user's tablespace is 85 percent full and an update operation occurs on the cached Oracle table, enter:

CALL ttCacheConfig('TblSpaceThreshold',,,'85');

Note

This procedure is available only for IMDB Cache.

You must call the ttCacheGrid built-in procedure from every node in a cache grid or a active standby pair. For more information, see "Reporting Oracle execution errors for AWT cache groups" in the Oracle In-Memory Database Cache User's Guide.

See also

ttCacheDbCgStatus
ttCachePolicyGet
ttCachePolicySet
ttCacheStart
ttCacheStop
ttCacheUidGet
ttCacheUidPwdSet
ttAdmin

ttCacheDbCgStatus

Description

This procedure returns the automatic refresh status of the database and the specified cache group. If you do not specify any values for the parameters, the procedure returns the automatic refresh status for the database.

Required privilege

This procedure requires no privilege.

Syntax

ttCacheDbCgStatus([cgowner, cgName])

Parameters

ttCacheDbCgStatus has these optional parameters:

Parameter

Type

Description

cgOwner

VARCHAR2(30)

Specifies the user name of the cache group owner.

cgName

VARCHAR2(30)

Specifies the cache group name.

Result set

ttCacheDbCgStatus returns the result:

Column

Type

Value

dbStatus

VARCHAR2(20)

Specifies the status of all the cache groups in the database with respect to autorefresh. The status is one of:
alive - The database is active. The status of all cache groups is ok. The cache agent has been in contact with the Oracle Server.

dead - The cache agent was not able to contact Oracle within the timeout period. The status of all the cache groups with the AUTOREFRESH attribute is terminated.

recovering - Some or all the cache groups with the AUTOREFRESH attribute are being resynchronized with the Oracle Server. The status of at least one cache group is recovering.

cgStatus

VARCHAR2(20)

Specifies the autorefresh status of the specified cache group. The status is one of:
ok - The specified cache group is synchronized with the Oracle database. The cache agent has been in contact with the Oracle Server.

dead - The cache agent was not able to contact Oracle within the timeout period and the specified cache group may be out of sync with the Oracle Server.

recovering - The specified cache group is being resynchronized with the Oracle Server.

Examples

This example shows that the automatic refresh status of the database is alive. The automatic refresh status of the cache group is ok.

CALL ttCacheDbCgStatus ('terry', 'cgemployees');
< alive, ok >
1 row found.

To determine the automatic refresh status of the database, call ttCacheDbCgStatus with no parameters:

CALL ttCacheDbCgStatus;
< dead, <NULL> >
1 row found.

Note

This procedure is available only for IMDB Cache.

See also

ttCacheConfig
ttCachePolicyGet
ttCachePolicySet
ttCacheStart
ttCacheStop
ttCacheUidGet
ttCacheUidPwdSet
ttAdmin

ttCacheDDLTrackingConfig

This procedure enables or disables tracking of DDL statements issued on cached Oracle tables. By default, DDL statements are not tracked.

DDL tracking saves the change history for all the cached Oracle tables. The SQL statement and when it was executed are written to a table in the cache administration user schema on Oracle. One DDL tracking table is created to store DDL statements issued on any cached Oracle table. This information can be used to diagnose autorefresh problems.

See "Tracking DDL statements issued on cached Oracle tables" in Oracle In-Memory Database Cache User's Guide.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCacheDDLTrackingConfig('trackingStatus')

Parameters

ttCacheDDLTrackingConfig has the parameter:

Parameter

Type

Description

trackingStatus

TT_VARCHAR(10)

Specifies whether DDL statements issued on cached Oracle tables are tracked. Valid values are:
enable - Enables tracking.

disable (default) - Disables tracking.

Result set

ttCacheDDLTrackingConfig returns no results.

Examples

Command> CALL ttCacheDDLTrackingConfig('enable');

ttCachePolicyGet

Description

This procedure returns the current policy used to determine when the TimesTen cache agent for the connected database should run. The policy can be either always or manual.

Required privilege

This procedure requires no privilege.

Syntax

ttCachePolicyGet()

Parameters

ttCachePolicyGet has no parameters.

Result set

ttCachePolicyGet returns the result:

Column

Type

Value

cachePolicy

TT_VARCHAR(10)

Specifies the policy used to determine when the TimesTen cache agent for the database should run. Valid values are:
always - Specifies that the agent for the database is always running. This option immediately starts the TimesTen cache agent. When the TimesTen daemon restarts, TimesTen automatically restarts the cache agent.

manual (default) - Specifies that you must manually start the cache agent using either the ttCacheStart built-in procedure or the ttAdmin -cacheStart command. You must explicitly stop the cache agent using either the ttCacheStop built-in procedure or the ttAdmin -cacheStop command.

Examples

To get the current policy for the TimesTen cache agent, use:

CALL ttCachePolicyGet ();

Note

This procedure is available only for IMDB Cache.

See also

ttCacheConfig
ttCacheDbCgStatus
ttCachePolicySet
ttCacheStart
ttCacheStop
ttCacheUidGet
ttCacheUidPwdSet
ttAdmin

ttCachePolicySet

Description

The procedure defines the policy used to determine when the TimesTen cache agent for the connected database should run. The policy can be either always or manual.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCachePolicySet('cachePolicy')

Parameters

ttCachePolicySet has these parameters:

Parameter

Type

Description

cachePolicy

TT_VARCHAR(10) NOT NULL

Specifies the policy used to determine when the TimesTen cache agent for the database should run. Valid values are:
always - Specifies that the agent for the database is always running. This option immediately starts the TimesTen cache agent. When the TimesTen daemon restarts, TimesTen automatically restarts the cache agent.

manual (default) - Specifies that you must manually start the cache agent using either the ttCacheStart built-in procedure or the ttAdmin -cacheStart command. You must explicitly stop the cache agent using either the ttCacheStop built-in procedure or the ttAdmin -cacheStop command.

norestart - Specifies that the cache agent for the database is not to be restarted after a failure.

Result set

ttCachePolicySet returns no results.

Examples

To set the policy for TimesTen cache agent to always, use:

CALL ttCachePolicySet ('always');

Notes

This procedure is available only for IMDB Cache.

If you attempt to start the TimesTen cache agent (by changing the policy from manual to always) for a database with a relative path, TimesTen looks for the database relative to where TimesTen Data Manager is running, and fails. For example, on Windows, if you specify the path for the database as DataStore=./payroll and attempt to start the TimesTen cache agent with this built-in procedure, the agent is not started because TimesTen Data Manager looks for the database in the install_dir\srv directory. On UNIX, TimesTen Data Manager looks in the /var/TimesTen/instance directory.

Successfully setting the policy to always automatically starts the cache agent if it was stopped.

See also

ttCacheConfig
ttCacheDbCgStatus
ttCachePolicyGet
ttCacheStart
ttCacheStop
ttCacheUidGet
ttCacheUidPwdSet
ttAdmin

ttCachePropagateFlagSet

Description

This procedure allows you to temporarily stop any updates from propagating to Oracle.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCachePropagateFlagSet(CommitsOn)

Parameters

ttCachePropagateFlagSet has the parameter:

Parameter

Type

Description

CommitsOn

TT_INTEGER NOT NULL

If 0, sets a flag to stop updates from being sent to Oracle. The flag remains set until the end of the transaction or until the procedure is set to 1.
If 1, updates are sent to Oracle.

Result set

ttCachePropagateFlagSet returns no results.

Notes

This procedure is available only for IMDB Cache.

When using this procedure, it is important to turn off AutoCommit, otherwise after the procedure is called the transaction ends and propagation to Oracle is turned back on.

The propagate flag is reset after a commit or rollback.

If the value of ttCachePropagateFlagSet is re-enabled several times during a single transaction, the transaction is only partially propagated to Oracle.

ttCachePropagateFlagSet is the only built-in procedure that can be used in the same transaction as any of the other cache group operations, such as FLUSH, LOAD, REFRESH and UNLOAD.

ttCacheSqlGet

Description

This procedure generates the Oracle SQL statements to install or uninstall Oracle objects for:

- Read-only cache groups

- User managed cache groups with incremental autorefresh

- Asynchronous writethrough (AWT) cache groups

This is useful when the user creating the cache group does not have adequate privilege to write on the Oracle database. The Oracle DBA can then use the script generated by this built-in procedure to create the Oracle objects.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCacheSqlGet('feature_name', 'cache_group_name', install_flag)

Parameters

ttCacheSqlGet has these parameters:

Parameter

Type

Description

feature_name

TT_VARCHAR (100)

Can be specified as INCREMENTAL_AUTOREFRESH or ASYNCHRONOUS_WRITETHROUGH.

cache_group_name

TT_VARCHAR (100)

The name of the cache group. Specify NULL when installing objects for asynchronous writethrough cache groups or to uninstall all Oracle objects in the autorefresh user's account.

install_flag

TT_INTEGER NOT NULL

If install_flag is 1, ttCacheSqlGet returns Oracle SQL to install the autorefresh or asynchronous writethrough Oracle objects.
If install_flag is 0, ttCacheSqlGet returns SQL to uninstall the previously created objects.

Result set

ttCacheSqlGet returns the result set:

Column

Type

Description

retval

TT_VARCHAR (4096) NOT NULL

The Oracle SQL statement to uninstall or install autorefresh or asynchronous writethrough Oracle objects.

continueFlag

TT_SMALLINT NOT NULL

Non-zero only if the Oracle SQL statement in the retval result column exceeds 4096 bytes and must be continued into the next result row.

Example

CALL ttCacheSqlGet('INCREMENTAL_AUTOREFRESH', 'westernCustomers', 1);

To remove all Oracle objects in the autorefresh user's account, use:

CALL ttCacheSqlGet('INCREMENTAL_AUTOREFRESH', NULL, 0);

Notes

This procedure is available only for IMDB Cache.

Each returned retval field contains a separate Oracle SQL statement that may be directly executed on Oracle. A row may end in the middle of a statement, as indicated by the continueFlag field. In this case, the statement must be concatenated with the previous row to produce a usable SQL statement.

The script output of this procedure is not compatible with Oracle's SQL*Plus utility. However, you can use the ttIsql cachesqlget command to generate a script that is compatible with the SQL*Plus utility.

You can specify NULL for the cache_group_name option to generate Oracle SQL to clean up Oracle objects after a database has been destroyed by the ttDestroy utility.

ttCacheStart

Description

This procedure starts the TimesTen cache agent for the connected database.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCacheStart()

Parameters

ttCacheStart has no parameters.

Result set

ttCacheStart returns no results.

Examples

To start the TimesTen cache agent, use:

CALL ttCacheStart ();

Notes

This procedure is available only for IMDB Cache.

The cache administration user ID and password must be set before starting the cache agent when there are or might be autorefresh or asynchronous writethrough cache groups in the database.

If you attempt to start the TimesTen cache agent (by changing the policy from manual to always) for a database with a relative path, TimesTen looks for the database relative to where the TimesTen Data Manager is running, and fails. For example, on Windows, if you specify the path for the database as DataStore=./payroll and attempt to start the TimesTen cache agent with this built-in procedure, the agent is not started because TimesTen Data Manager looks for the database in the \srv directory. On UNIX, the TimesTen Data Manager looks in the /var/TimesTen/instance directory.

When using this procedure, no application, including the application making the call, can be holding a connection that specifies database-level locking (LockLevel=1).

See also

ttCacheConfig
ttCacheDbCgStatus
ttCachePolicyGet
ttCachePolicySet
ttCacheStop
ttCacheUidPwdSet
ttCacheUidGet
ttAdmin

ttCacheStop

Description

This procedure stops the TimesTen cache agent for the connected database.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCachdeStop(timeout)

Parameters

ttCacheStop has the parameter:

Parameter

Type

Description

timeout

TT_INTEGER

Specifies that the TimesTen daemon should kill the cache agent if it doesn't stop within timeout seconds. If set to 0, the daemon waits forever for the cache agent. The default value is 100 seconds.

Result set

ttCacheStop returns no results.

Examples

To stop the TimesTen cache agent, use:

CALL ttCacheStop();

Notes

This procedure is available only for IMDB Cache.

Do not shut down the cache agent immediately after dropping or altering a cache group. Instead, wait for at least two minutes. Otherwise, the cache agent may not get a chance to clean up the Oracle objects that were used by the AUTOREFRESH feature.

When using this procedure, no application, including the application making the call, can be holding a connection that specifies database-level locking (LockLevel=1).

See also

ttCachePolicySet
ttCacheStart
ttCacheUidPwdSet
ttCacheUidGet
"ttAdmin"

ttCacheUidGet

Description

This procedure returns the cache administration user ID for the database. If the cache administration user ID and password have not been set for the database, ttCacheUidGet returns NULL.

Required privilege

This procedure requires CACHE_MANAGER privilege.

Syntax

ttCacheUidGet()

Parameters

ttCacheUidGet has no parameters.

Result set

ttCacheUidGet returns the results:

Column

Type

Description

UID

TT_VARCHAR (30)

The current cache administration user ID, used for autorefresh and asynchronous writethrough cache groups.

Example

CALL ttCacheUidGet();

Note

This procedure is available only for IMDB Cache.

See also

ttCacheUidPwdSet
ttAdmin

ttCacheUidPwdSet

Description

This procedure sets the cache administration user ID and password. You only need to specify the cache administration user ID and password once for each new database. The cache administration password can be changed at any time.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttCacheUidPwdSet('UID', 'PWD')

Parameters

ttCacheUidPwdSet has these parameters:

Parameter

Type

Description

UID

TT_VARCHAR (30)

The cache administration user ID, used for autorefresh and asynchronous writethrough cache groups.

PWD

TT_VARCHAR (30)

The password for the cache administration user.

Result set

ttCacheUidPwdSet returns no results.

Example

CALL ttCacheUidPwdSet('myid', 'mypwd');

Notes

This procedure cannot be called from a Client/Server connection.

This procedure is available only for IMDB Cache.

The cache administration user ID and password cannot be set while either the cache agent or the replication agent are running.

The cache administration user ID cannot be reset while there are asynchronous writethrough cache groups or autorefresh cache groups (with a state that is not equal to OFF) on the database.

See also

ttCacheUidGet
ttAdmin

ttCkpt

Description

This procedure performs a non-blocking checkpoint operation. The blocking checkpoints are described in "ttCkptBlocking". A checkpoint operation is used to make a record of the current state of the database on disk and to purge transaction log files. A non-blocking checkpoint does not require any locks on the database.

Applications should checkpoint databases periodically either by setting the background checkpointing attributes (CkptFrequency and CkptLogVolume) or by explicitly calling this procedure. Applications can call this procedure asynchronously to any other application running on the database.

By default, TimesTen performs background checkpoints at regular intervals.

In the case that your application attempts to perform a checkpoint operation while a backup is in process, the backup waits until the checkpoint finishes. Regardless of whether the checkpoint is a background checkpoint or an application-requested checkpoint, the behavior is:

- If a backup or checkpoint is running and you try to do a backup, it waits for the running backup or checkpoint to finish.

- If a backup or checkpoint is running and you try to do a checkpoint, it does not wait. It returns an error immediately.

To turn off background checkpointing, set CkptFrequency=0 and CkptLogVolume=0.

When a database crashes, and the checkpoints on disk are non-blocking checkpoints, TimesTen uses the log to recover.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttCkpt()

Parameters

ttCkpt has these optional parameters:

Parameter

Type

Description

timeout

TT_INTEGER

The time (in seconds) that ttCkpt should wait to get a database lock before timing out. The value of timeout can be between 0 and one million, inclusively. If not specified, it defaults to infinity (the checkpoint never times out).

retries

TT_INTEGER

The number of times that ttCkpt should attempt to get a database lock, if timeouts occur. The value of retries can be between 0 and 10, inclusive. If not specified, defaults to zero.

Result set

ttCkpt returns no results.

Example

CALL ttCkpt();

Note

For a description of checkpoints, see "Transaction Management and Recovery" in Oracle TimesTen In-Memory Database Operations Guide.

See also

ttCkptBlocking
ttCkptConfig
ttCkptHistory

ttCkptBlocking

Description

This procedure performs a blocking checkpoint operation. A checkpoint operation is used to make a record of the current state of the database on disk, and to purge transaction log files. This checkpoint requires exclusive access to the database, and so may cause other applications to be blocked from the database while the checkpoint is in progress.

When this procedure is called, TimesTen performs a blocking checkpoint when the current transaction is committed or rolled back. If, at that time, other transactions are in progress, the checkpointing connection waits until the other transactions have committed or rolled back. While the checkpoint connection is waiting, any other new transactions that want to start form a queue behind the checkpointing transaction. As a result, if any transaction is long-running, it may cause many other transactions to be held up. So this blocking checkpoint should be used with caution. To perform a non-blocking checkpoint, use the ttCkpt procedure.

No log is needed to recover when blocking checkpoints are used. TimesTen uses the log, if present, to bring the database up to date after recovery.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttCkptBlocking(timeout, retries)

Parameters

ttCkptBlocking has these optional parameters:

Parameter

Type

Description

timeout

TT_INTEGER

The time (in seconds) that ttCkptBlocking should wait to get a database lock before timing out. The value of timeout can be between 0 and one million, inclusively. If not specified, it defaults to infinity (the checkpoint never times out).

retries

TT_INTEGER

The number of times that ttCkptBlocking should attempt to get a database lock, if timeouts occur. The value of retries can be between 0 and 10, inclusive. If not specified, defaults to zero.

Result set

ttCkptBlocking returns no results.

Example

CALL ttCkptBlocking();
CALL ttCkptBlocking(1,10);

Notes

Because the checkpoint takes place at commit or rollback, the call to ttCkptBlocking always succeed. At commit or rollback, any problems with the checkpoint operation, such as a lack of disk space or a timeout, result in a warning being returned to the application. Checkpoint problems are not reflected as errors, since the commit or rollback of which they are a part can succeed even if the checkpoint fails. Warnings are reflected in ODBC with the return code SQL_SUCCESS_WITH_INFO.

For more information on checkpoints, see "Transaction Management and Recovery" in Oracle TimesTen In-Memory Database Operations Guide.

See also

ttCkpt
ttCkptConfig
ttCkptHistory

ttCkptConfig

Description

This procedure reconfigures the background checkpointer dynamically or returns the currently active settings of the configuration parameters. Changes made using ttCkptConfig become effective immediately. Thus, changes to ckptRate can take effect on a checkpoint that is currently in progress.

Changes made to the background checkpointer using ttCkptConfig are persistent. Subsequent loads of the database retain the new settings, unless the CkptFrequency and CkptLogVolume connection attributes are specified in the DSN or connection string, in which case the attribute values are used instead.

Required privilege

This procedure requires no privilege to query the current values. It requires the ADMIN privilege to change the current values.

Syntax

ttCkptConfig(ckptFrequency, ckptLogVolume, ckptRate)

Parameters

ttCkptConfig has these parameters:

Parameter

Type

Description

ckptFrequency

TT_INTEGER

Checkpoint frequency in seconds. Values from 0 to MAXINT are allowed. A value of 0 means that checkpoint frequency is not considered when scheduling checkpoints.

ckptLogVolume

TT_INTEGER

Log volume between checkpoints in megabytes. Values from 0 to MAXINT are allowed. A value of 0 means that checkpoint log volume is not considered when scheduling checkpoints.

ckptRate

TT_INTEGER

Specifies the rate in MB per second at which a checkpoint should be written to disk. A value of 0 indicates that the rate should not be limited, a value of NULL means that the rate should be left unchanged. Changes to this parameter take effect even on a checkpoint that is currently in-progress.

Result set

ttCkptConfig returns the following results.

Column

Type

Description

ckptFrequency

TT_INTEGER NOT NULL

Currently active setting for checkpoint frequency in seconds.

ckptLogVolume

TT_INTEGER NOT NULL

Currently active setting for log volume between checkpoints in Megabytes.

ckptRate

TT_INTEGER NOT NULL

Current rate at which checkpoints are written to disk.

Examples

To view the current settings of the background checkpointer configuration parameters, use:

CALL ttCkptConfig;
< 600, 32, 0 >
1 row found.

To stop the background checkpointer from initiating checkpoints unless the log reaches its limit, use:

CALL ttCkptConfig(0);
< 0, 32, 0 >
1 row found.

To stop the background checkpointer from initiating checkpoints, use:

CALL ttCkptConfig(NULL, 0);
< 0, 0, 0 >
1 row found.

To set the background checkpointer configuration to initiate a checkpoint every 600 seconds or to checkpoint when the log reaches 32 megabytes (whichever comes first), use:

CALL ttCkptConfig(600, 32);
< 600, 32, 0 >
1 row found.

Notes

By default, TimesTen performs background checkpoints at regular intervals.

In the case that your application attempts to perform a checkpoint operation while a backup is in process, the backup waits until the checkpoint finishes. Regardless of whether the checkpoint is a background checkpoint or an application-requested checkpoint, the behavior is:

- If a backup or checkpoint is running and you try to do a backup, it waits for the running backup or checkpoint to finish.

- If a backup or checkpoint is running and you try to do a checkpoint, it does not wait. It returns an error immediately.

To turn off background checkpointing, set CkptFrequency=0 and CkptLogVolume=0.

See also

CkptFrequency
CkptLogVolume
ttCkpt
ttCkptHistory

ttCkptHistory

Description

This procedure returns information about the last eight checkpoints of any type taken by any agent.

Required privilege

This procedure requires no privilege.

Syntax

ttCkptHistory( )

Parameters

ttCkptHistory has no parameters.

Result set

ttCkptHistory returns the result set:

Column

Type

Description

startTime

TT_TIMESTAMP NOT NULL

Time when the checkpoint was begun.

endTime

TT_TIMESTAMP

Time when the checkpoint completed.

type

TT_CHAR (16) NOT NULL

The type of checkpoint taken. Value is one of:
Static - Automatically taken at database creation and at last disconnect.

Blocking - Transaction-consistent checkpoint.

Fuzzy - Non-blocking checkpoint. The background checkpointer performs this type if possible.

None - For ReplicationParallelism databases, which have no checkpoint files.

status

TT_CHAR (16) NOT NULL

Result status of the checkpoint operation. Value is one of:
In Progress - The checkpoint is currently in progress. Only the most recent result row can have this status.

Completed - The checkpoint completed successfully.

Failed - The checkpoint failed. Only the most recent result row can have this status. In this case the error column indicates the reason for the failure.

initiator

TT_CHAR (16) NOT NULL

The source of the checkpoint request. Value is one of:
User - A user-level application. This includes TimesTen utilities such as ttIsql.

Checkpointer - The background checkpointer.

Subdaemon - The managing subdaemon of the database. For a shared database, the final disconnect checkpoint is taken by the subdaemon.

error

TT_INTEGER

If a checkpoint fails, this column indicates the reason for the failure. The value is one of the TimesTen error numbers.

ckptFileNum

TT_INTEGER NOT NULL

The database file number used by the checkpoint. This corresponds to the number in the checkpoint file extension datastore.ds0 or datastore.ds1.

ckptLFN

TT_INTEGER

The transaction log file number of the checkpoint log record.

ckptLFO

TT_BIGINT

The transaction log file offset of the checkpoint log record.

blksTotal

TT_BIGINT

The number of permanent blocks currently allocated in the database. These blocks are subject to consideration for checkpointing.

bytesTotal

TT_BIGINT

The number of bytes occupied by blksTotal.

blksInUse

TT_BIGINT

Of blksTotal, the number of blocks currently in use.

bytesInUse

TT_BIGINT

The number of bytes occupied by blksInUse.

blksDirty

TT_BIGINT

The number of dirty blocks written by this checkpoint.

bytesDirty

TT_BIGINT

The number of bytes occupied by blksDirty.

bytesWritten

TT_BIGINT

The total number of bytes written by this checkpoint.

Percent_Complete

TT_INTEGER

If there is an in-progress checkpoint, indicates the percentage of the checkpoint that has been completed. If no checkpoint is in-progress, the value is NULL. The returned value is calculated by comparing the block ID of the last-written block against the database's PermSize. The value does not necessarily indicate the precise time remaining to complete the checkpoint, although it does give some indication of the remaining time needed to complete the disk write. The field shows only the progress of the writing of dirty blocks and does not include additional bookkeeping at the end of the checkpoint. The value is non-NULL if you call this procedure while a checkpoint is in progress.

ckptVNo

TT_INTEGER NOT NULL

The checkpoint sequence number that is incremented for each checkpoint.

Examples

This example shows a checkpoint in progress:

Call ttckpthistory;
< 2011-04-14 16:56:34.169520, <NULL>, Fuzzy           , In Progress     , User
, <NULL>, 0, <NULL>, <NULL>, <NULL>, <NULL>, <NULL>, <NULL>, <NULL>, <NULL>
<NULL>, 13, 6 >

< 2011-04-14 16:55:47.703199, 2011-04-14 16:55:48.188764, Fuzzy           ,
Completed       , Checkpointer    , <NULL>, 1, 0, 8964304, 294, 33554432, 291,
5677288, 27, 1019512, 1065408, <NULL>, 5 >

< 2011-04-14 16:54:47.106110, 2011-04-14 16:54:47.723379, Static          ,
Completed       , Subdaemon       , <NULL>, 0, 0, 8960328, 294, 33554432, 291,
5677288, 256, 33157172, 5321548, <NULL>, 4 >

< 2011-04-14 16:54:41.633792, 2011-04-14 16:54:42.568469, Blocking        ,
Completed       , User            , <NULL>, 1, 0, 8958160, 294, 33554432, 291,
5677288, 31, 1162112, 6604976, <NULL>, 3 >

< 2011-04-14 16:54:37.438827, 2011-04-14 16:54:37.977301, Static          ,
Completed       , User            , <NULL>, 0, 0, 1611984, 93, 33554432, 92,
1853848, 93, 33554432, 1854052, <NULL>, 2 >

< 2011-04-14 16:54:36.861728, 2011-04-14 16:54:37.438376, Static          ,
Completed       , User            , <NULL>, 1, 0, 1609936, 93, 33554432, 92,
1853848, 93, 33554432, 1854052, <NULL>, 1 >

6 rows found.

This example shows that an error occurred during the most recent checkpoint attempt:

call ttckpthistory;
< 2011-04-14 16:57:14.476860, 2011-04-14 16:57:14.477957, Fuzzy           , Failed
, User            , 847, 1, <NULL>, <NULL>, 0, 0, 0, 0, 0, 0, 0, <NULL>, 7 >

< 2011-04-14 16:56:34.169520, 2011-04-14 16:56:59.715451, Fuzzy           ,
Completed       , User            , <NULL>, 0, 0, 8966472, 294, 33554432, 291,
5677288, 5, 522000, 532928, <NULL>, 6 >

< 2011-04-14 16:55:47.703199, 2011-04-14 16:55:48.188764, Fuzzy           ,
Completed       , Checkpointer    , <NULL>, 1, 0, 8964304, 294, 33554432, 291,
5677288, 27, 1019512, 1065408, <NULL>, 5 >

< 2011-04-14 16:54:47.106110, 2011-04-14 16:54:47.723379, Static          ,
Completed       , Subdaemon       , <NULL>, 0, 0, 8960328, 294, 33554432, 291,
5677288, 256, 33157172, 5321548, <NULL>, 4 >

< 2011-04-14 16:54:41.633792, 2011-04-14 16:54:42.568469, Blocking        ,
Completed       , User            , <NULL>, 1, 0, 8958160, 294, 33554432, 291,
5677288, 31, 1162112, 6604976, <NULL>, 3 >

< 2011-04-14 16:54:37.438827, 2011-04-14 16:54:37.977301, Static          ,
Completed       , User            , <NULL>, 0, 0, 1611984, 93, 33554432, 92,
1853848, 93, 33554432, 1854052, <NULL>, 2 >

< 2011-04-14 16:54:36.861728, 2011-04-14 16:54:37.438376, Static          ,
Completed       , User            , <NULL>, 1, 0, 1609936, 93, 33554432, 92,
1853848, 93, 33554432, 1854052, <NULL>, 1 >

7 rows found.

Notes

Results are ordered by start time, with the most recent first.

A failed row is overwritten by the next checkpoint attempt.

See also

ttCkpt
ttCkptBlocking

ttCompact

Description

This procedure compacts both the permanent and temporary data partitions of the database.

ttCompact merges adjacent blocks of free space, but does not move any items that are allocated. Therefore, fragmentation that is caused by small unallocated blocks of memory surrounded by allocated blocks of memory is not eliminated by using ttCompact.'

This procedure is supported for backward compatibility. New applications should not call it.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttCompact()

Parameters

ttCompact has no parameters.

Result set

ttCompact returns no results.

Example

CALL ttCompact;

Note

Compacting data does not modify result addresses.

See also

ttCompactTS

ttCompactTS

Description

This procedure is similar to ttCompact, except that ttCompactTS may be used to compact a small fraction of the database, while ttCompact compacts the entire database. ttCompactTS is a time-sliced version of ttCompact. ttCompactTS iterates through all the blocks in the database compacting the quantum specified each time. When a sweep is completed, the value of the DS_COMPACTS field in the MONITOR table is incremented.

This procedure is supported for backward compatibility. New applications should not call it.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttCompactTS(quantum)

Parameters

ttCompactTS has the parameter:

Parameter

Type

Description

quantum

TT_INTEGER NOT NULL

A nonzero positive integer that specifies the number of data blocks a ttCompactTS should compact. Each quantum corresponds to one data block.

Result set

ttCompactTS returns no results.

Example

CALL ttCompactTS (5);

Note

Compacting data does not modify result addresses.

See also

ttCompact

ttComputeTabSizes

Description

The ttComputeTabSizes built-in procedure refreshes table size statistics stored in TimesTen system tables. After calling this built-in procedure, you can review the statistics updates by querying the DBA_TAB_SIZES, USER_TAB_SIZES or ALL_TAB_SIZES view.

This procedure computes the different types of storage allocated for the specified table, such as the amount of storage allocated for in-line row storage, out-of-line buffers and system usage. If no table is specified, the procedure computes the sizes for all tables on which the user has SELECT privileges.The execution of this built-in behaves like a DDL statement: the transaction commits just before the procedure begins and commits again upon its successful termination.

Required privilege

This procedure requires the SELECT privilege on the specified table.

Syntax

ttComputeTabSizes (['tblName'], [includeOutOfLine])

Parameters

ttComputeTabSizes has the parameters:

Parameter

Type

Description

tblName

TT_CHAR(61)

Name of an application table. Can include the table owner. If a value of NULL or an empty string is provided, updates the statistics for all the current tables.
The type of tables that can be estimated are:

- User tables, including cache group tables.

- Materialized views

- System tables

includeOutOfLine

TT_INTEGER

0 (no) or 1 (yes). Default is 1 (yes).
If value is 0 (no), the procedure does not compute the size of out-of-line values for any table that has out-of-line columns. The out-of-line fields are displayed as NULL.

Avoiding the computation of out-of-line values significantly decreases the latency of this procedure.

Result set

ttComputeTabSizes returns no results.

Example

To compute the size of my_table without including out-of-line columns, use:

CALL ttComputeTabSizes ('my_table', 0);

Note

The built-in procedure allows concurrent insertions while ttComputeTabSizes is executing. For this reason, the size computed by ttComputeTabSizes for each table is any value between the minimum size of the table during the computation and the maximum size of the table during the computation. For example, if a table is 250 MB in size when ttComputeTabSizes is executed, and a transaction running concurrently raises its size to 300 MB, ttComputeTabSizes estimates a value between 250 and 300 MB.

See also

ttSize

ttConfiguration

Description

The ttConfiguration procedure returns the values for most connection attributes for the current database connection.

Required privilege

This procedure requires no privilege.

Syntax

ttConfiguration('paramName')

Parameters

ttConfiguration has the optional parameter:

Parameter

Type

Description

paramName

TT_VARCHAR (30)

The name of a connection attribute for which you want this procedure to return the value.

Result set

ttConfiguration returns the result set:

Column

Type

Description

paramName

TT_VARCHAR (30) NOT NULL

The names of the connection attributes specified in the connection string, returned in alphabetical order.

paramValue

TT_VARCHAR (1024)

The values of the connection attributes specified in the connection string.

Example

To see the value of the QueryThreshold connection attribute, use

CALL ttConfiguration('querythreshold');
<QueryThreshold, 0>
1 row found

To see the values of all attributes, use:

CALL ttConfiguration();
< CacheGridEnable, 1 >
< CacheGridMsgWait, 60 >
< CkptFrequency, 600 >
< CkptLogVolume, 0 >
. . .

Note

Client driver attributes are not returned by this procedure.

See also

Connection Attributes

ttContext

Description

This procedure returns the context value of the current connection as a BINARY(8) value. The context can be used to correlate a unique connection to a database from the list of connections presented by the ttStatus utility and the ttDataStoreStatus built-in procedure.

Required privilege

This procedure requires no privilege.

Syntax

ttContext()

Parameters

ttContext has no parameters.

Result set

ttContext returns the result set:

Column

Type

Description

CONTEXT

BINARY(8)

Current connection's context value.

Example

CALL ttContext;

Note

The context value numbers are unique only within a process. The context value number is not unique within the entire database. Therefore you may see the same context value number for different processes.

See also

ttDataStoreStatus
ttStatus

ttDataStoreStatus

Description

This procedure returns the list of processes connected to a database. If the dataStore parameter is specified as NULL, then the status of all active databases is returned.

The result set is similar to the printed output of the ttStatus utility.

Required privilege

This procedure requires no privilege.

Syntax

ttDataStoreStatus('dataStore')

Parameters

ttDataStoreStatus has the parameter:

Parameter

Type

Description

dataStore

TT_VARCHAR (256)

Full path name of desired database or NULL for all databases.

Result set

ttDataStoreStatus returns the result set:

Column

Type

Description

dataStore

TT_VARCHAR (256) NOT NULL

Full path name of database.

PID

TT_INTEGER NOT NULL

Process ID.

Context

BINARY(8) NOT NULL

Context value of connection.

conType

TT_CHAR (16) NOT NULL

Type of process connected. The result can be one of the following:
application - An ordinary application is connected.

replication - A replication agent is connected.

subdaemon - A subdaemon is connected.

oracleagent - An cache agent is connected.

ShmID

TT_VARCHAR (260) NOT NULL

A printable version of the shared memory ID that the database occupies.

connection_Name

TT_CHAR (30) NOT NULL

The symbolic name of the database connection.

connID

TT_INTEGER NOT NULL

The numeric ID of the database connection

Example

CALL ttDataStoreStatus('/data/Purchasing');

See also

ttContext
ttStatus

ttDurableCommit

Description

This procedure specifies that the current transaction should be made durable when it is committed. It only has an effect if the application is connected to the database with DurableCommits disabled.

Calling ttDurableCommit also makes durable the current transaction and any previously committed delayed durability transactions. There is no effect on other transactions that are committed subsequent to calling ttDurableCommit. ttDurableCommit does not commit transactions. The application must do the commit, for example with a call to SQLTransact.

Required privilege

This procedure requires no privilege.

Syntax

ttDurableCommit()

Parameters

ttDurableCommit has no parameters.

Result set

ttDurableCommit returns no results.

Example

CALL ttDurableCommit;

Note

Some controllers or drivers may only write data into cache memory in the controller or may write to disk some time after the operating system is told that the write is done. In these cases, a power failure may mean that some information you thought was durably committed does not survive the power failure. To avoid this loss of data, configure your disk to write all the way to the recording media before reporting completion or you can use an Uninterruptable Power Supply (UPS).

ttGridAttach

Description

This procedure attaches a grid member to an existing local cache grid. A grid member can be a standalone TimesTen database or a TimesTen active standby pair.

If a member is an active standby pair, both nodes of the pair must attach to the grid. When calling the ttGridAttach built-in procedure from each node of the active standby pair, specify the IP address or host name of both nodes.

This procedure starts the cache agent if it is not already running. This procedure cannot be used remotely.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

For a standalone TimesTen database:

ttGridAttach(currentNode, 'name1', IPAddr1, port1)

For a node of an active standby pair:

ttGridAttach(currentNode, 'name1', IPAddr1, port1 'name2', IPAddr2, port2)

Parameters

ttGridAttach has the parameters:

Parameter

Type

Description

currentNode

TT_INTEGER NOT NULL

The node number for the master database. Valid values for this parameter are:
1 - Standalone or active master database.

2 - Standby master database.

name1

TT_VARCAR (30)

Fully qualified name that uniquely identifies the grid member for the active master database.

IPAddr1

TT_VARCHAR (128) NOT NULL

IP address of the node where the active master database resides.

port1

TT_INTEGER NOT NULL

Port number for the cache agent process of the active master database or a standalone database.

name2

TT_VARCAR (30)

Fully qualified name that uniquely identifies the grid member for the standby master database.

IPAddr2

TT_VARCHAR (128) NOT NULL

IP address of the node where the standby master database resides.

port2

TT_INTEGER NOT NOLL

Port number for the cache agent process of the standby master database.

Result set

ttGridAttach returns no results.

Examples

To attach to a standalone TimesTen database to a grid:

CALL ttGridAttach (1, 'alone2','sys2',5002);

To attach an active master database to a grid:

CALL ttGridAttach(1,'cacheact','sys1',5003,'cachestand','sys2',5004);

To attach a standby master database to a grid:

CALL ttGridAttach(2,'cacheact','sys1',5003,'cachestand','sys2',5004);

Note that the only difference between the calls for attaching the active and the standby master stores is the node number.

See also

ttGridCheckOwner
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachList
ttGridDetachAll
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridCheckOwner

Description

This procedure checks if the number of rows in global cache groups match number of rows in the ownership tables. Call this procedure only when the cache grid is quiet.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridCheckOwner(['cvName', 'cvOwner'])

Parameters

ttGridCheckOwner has the optional parameter:

Parameter

Type

Description

cvName

TT_VARCHAR (30)

The name of the cache group to be checked. If null, all cache groups are checked.

cvOwner

TT_VARCHAR (30)

The owner of the cache group to be checked. If null, all cache groups are checked.

Result set

ttGridCheckOwner displays no results.

Example

To get information on the mygroup cache group, owned by user terry, use:

CALL ttGridCheckOwner ('mygroup', 'terry');

To get information on all cache groups, use:

CALL ttGridCheckOwner();

See also

ttGridAttach
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridCreate

Description

This procedure creates a cache grid. This built-in procedure must be run only once. You can run it from any standalone database or from the active or standby master database in an active standby pair.

You must commit after calling this procedure if AUTOCOMMIT=0.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridCreate('gridName')

Parameters

ttGridCreate has the parameter:

Parameter

Type

Description

gridName

TT_VARCHAR (30) NOT NULL

Specifies the name of the grid.

Result set

ttGridCreate returns no results.

Example

To create a grid named mygrid:

CALL ttGridCreate ('mygrid');

See also

ttGridAttach
ttGridCheckOwner
ttGridDestroy
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridDestroy

Description

This procedure destroys a cache grid by removing all cache grid objects stored on the Oracle database.

By default, this built-in procedure does not destroy the grid if there are still attached members or existing cache groups. Before destroying a cache grid, detach all the TimesTen databases from the cache grid. To force the grid to be destroyed, supply a value of '1' as an argument to the force parameter.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridDestroy('gridName', [force])

Parameters

ttGridDestroy has the parameters:

Parameter

Type

Description

gridName

TT_VARCHAR (30) NOT NULL

The fully qualified name of the grid to be destroyed.

force

TT_INTEGER

This optional parameter forces the cache grid to be destroyed even if there are still grid members attached to the cache grid or if it still contains cache groups. Valid value is 1.

Result set

ttGridDestroy returns no results.

Example

To destroy the mygrid cache grid with force, use:

CALL ttGridDestroy ('mygrid', 1);

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridDetach

Description

This procedure detaches a node from a cache grid.

Use this procedure before destroying a cache grid. You cannot destroy a cache grid if there are any nodes attached to the cache grid.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridDetach([['nodeMemberName',] [force] [oraclePropWaitSec])

Parameters

ttGridDetach has the optional parameters:

Parameter

Type

Description

nodeMemberName

TT_VARCHAR (200)

Specifies the node to detach from the grid.
Each node of an active standby pair must be detached separately.

force

TT_INTEGER

This optional parameter forces a node to be detached without checking whether it is terminated. Valid value is 1.

oraclePropWaitSec

TT_INTEGER

The optional parameter specifies the number of seconds to wait for all transactions to propagate to Oracle before detaching the node. A value of -1 indicates to wait forever. If no value is specified, ttGridDetach waits 1 second.

Result set

ttGridDetach returns no results.

Example

To detach the current node from the grid, use

CALL ttGridDetach();

To detach the remote node TTGRID_alone2_2 from the grid, use

CALL ttGridDetach('TTGRID_alone2_2',1);

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDetachAll
ttGridDetachList
ttGridDestroy
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridDetachAll

Description

This procedure detaches all attached members from the grid. A grid member can be a standalone TimesTen database or a TimesTen active standby pair.

This procedure starts the cache agent if it is not already running.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridDetachAll([oraclePropWaitSec])

Parameters

ttGridDetachAll has the optional parameter:

Parameter

Type

Description

oraclePropWaitSec

TT_INTEGER

The optional parameter specifies the number of seconds to wait for all transactions to propagate to Oracle before detaching all nodes. A value of -1 indicates to wait forever. If no value is specified, ttGridDetachAll waits 1 second.

Result set

ttGridDetachAll returns no results.

Examples

To detach all grid members, use:

CALL ttGridDetachAll();

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachList
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridDetachList

Description

This procedure detaches the nodes in the list. It is useful for remote nodes, because they are unavailable.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridDetachList('nodeMemberName1 [nodeMemberName2 ...]' [,force])

Parameters

ttGridDetachList has the parameters:

Parameter

Type

Description

nodeMemberName

TT_VARCHAR (8192) NOT NULL

The fully qualified name of the node to be removed.

force

TT_INTEGER

This optional parameter forces nodes to be detached without checking whether they are terminated. Valid value is 1.

oraclePropWaitSec

TT_INTEGER

The optional parameter specifies the number of seconds to wait for all transactions to propagate to Oracle before detaching the listed nodes. A value of -1 indicates to wait forever. If no value is specified, ttGridDetachList waits 1 second.

Result set

ttGridDetachList returns no results.

Example

CALL ttGridDetachList('TTGRID_cacheact_3A TTGRID_cachestand_3B',1, );

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDetach
ttGridDetachAll
ttGridDestroy
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridGlobalCGResume

Description

This procedure resumes operations that were blocked after a call to ttGridGlobalCGSuspend.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridGlobalCGResume()

Parameters

ttGridGlobalCGResume has no parameters.

Result set

ttGridGlobalCGResume returns no results.

Examples

To detach all grid members, use:

CALL ttGridGlobalCGResume();

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridGlobalCGSuspend

Description

This procedure temporarily blocks dynamic loading and deleting cache instances for global cache groups. Use the ttGridGlobalCGResume procedure to re-enable these actions.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridGlobalCGSuspend(wait)

Parameters

ttGridGlobalCGSuspend has the parameter:

Parameter

Type

Description

wait

TT_INTEGER NOT NULL

The number of seconds that the command waits for a pending delete to be propagated to Oracle or a pending transparent load operation to complete before returning.TimesTen returns an error if either the pending delete or the pending transparent load operation cannot complete in the specified time.
If no value is specified, there is no wait interval.

Result set

ttGridGlobalCGSuspend returns no results.

Examples

To set a wait interval of 10 seconds:

CALL ttGridGlobalCGSuspend(10);

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGResume
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridInfo

Description

This procedure returns information about the specified cache grid or all cache grids.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridInfo(['gridName'])

Parameters

ttGridInfo has the optional parameter:

Parameter

Type

Description

gridName

TT_VARCHAR (30)

If gridName is specified, displays information about the specified grid. Otherwise, displays information about all grids.

Result set

ttGridInfo returns information about the cache grid.

Column

Type

Description

gridName

TT_VARCHAR (30)

The name of the grid specified

cacheAdminID

TT_VARCHAR (30)
NOT NULL

The cache administration user ID associated with the grid.

platform

TT_VARCHAR (100)

The operating system platform on which the grid is operating.
The platform value is displayed as:

operating system, bit-level

For example:

<. . ., Solaris x86, 64-bit, . . .>

The comma does not represent a new column.

major1, major2, major3

TT_VARCHAR (10) for each field

The major TimesTen release associated with the grid. For example, release 11.2.1 is represented as 11, 2, 1.

Example

To get information on the mygrid cache grid, use:

CALL ttGridInfo ('mygrid');
< MYGRID, CACHEUSER, Linux Intel x86, 32-bit, 11, 2, 1 >

To get information on all grids, use:

CALL ttGridInfo();

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridNameSet

Description

This procedure associates a TimesTen database with a grid.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridNameSet('gridName')

Parameters

ttGridNameSet has the parameter:

Parameter

Type

Description

gridName

TT_VARCHAR (30)

Associates the TimesTen database that calls the procedure with the grid specified by gridName.

Result set

ttGridNameSet returns no results.

Example

To associate the database with the grid mygrid, use:

CALL ttGridNameSet('mygrid');

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNodeStatus
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridNodeStatus

Description

This procedure returns information about all members of the specified cache grid. If no grid name is specified, then it displays information about all members of all cache grids associated with the Oracle database.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttGridNodeStatus(['gridName'])

Parameters

ttGridNodeStatus has the optional parameter:

Parameter

Type

Description

gridName

TT_VARCHAR (30)

If gridName is specified, displays information about all members of the named grid. Otherwise, displays information about all grids.

Result Set

ttGridNodeStatus returns the results:

Column

Type

Description

gridName

TT_VARCHAR (30)

The name of the grid.

nodeID

TT_INTEGER NOT NULL

The unique ID of the grid node.

activeNode

TT_INTEGER NOT NULL

The number of the node on which the active master database or a standalone database currently resides.

node1Attached

CHAR (1) NOT NULL

Indicates if the active node is attached to the grid:
T - The active is attached.

F - The active is detached.

Host1

TT_VARCHAR (200) NOT NULL

The host name where the active database is located.

memberName1

TT_VARCHAR (200) NOT NULL

The unique member name for the stand alone database or active standby database.

IPaddr1

TT_VARCHAR (128) NOT NULL

The IP address where the active master or stand alone database is located.

port1

TT_INTEGER NOT NULL

The port number for the cache agent process of the active master or stand alone database.

node2Attached

CHAR (1)

Indicates if the standby node is attached to the grid:
T - The standby is attached.

F - The standby is detached.

host2

TT_VARCHAR (200)

The host name where the standby master database is located.

memberName2

TT_VARCHAR (200)

The unique member name for the stand alone database or active standby database.

IPaddr2

TT_VARCHAR (128)

The IP address where the standby master database is located.

port2

TT_INTEGER

The port number for the cache agent process of the standby master database.

For a grid member that is a standalone database, the number of columns in the result set is fewer than for a member that is an active standby pair.

Example

If ttgrid is the only cache grid in the database, display information about its members:

Command> call ttGridNodeStatus;

< TTGRID, 1, 1, T, sys1, TTGRID_alone1_1, 140.87.0.201, 5001, <NULL>,
<NULL>,<NULL>, <NULL>, <NULL> >
< TTGRID, 2, 1, T, sys2, TTGRID_alone2_2, 140.87.0.202, 5002, <NULL>,
<NULL>,<NULL>, <NULL>, <NULL> >
< TTGRID, 3, 1, T, sys3, TTGRID_cacheact_3A, 140.87.0.203, 5003, T, sys4,
TTGRID_cachestand_3B, 140.87.0.204, 5004 >

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttGridUserAssignedName

Description

This procedure returns the name of the current local host for the database. The value returned is only for the current session. It is not a systemwide setting and does not persist after the current session has been disconnected.

This procedure can be used to check whether a particular store name in a scheme refers to the current host. This can be helpful when configuring replication schemes.

Required privilege

This procedure requires no privilege.

Syntax

ttGridUserAssignedName()

Parameters

ttGridUserAssignedName has no parameters.

Result set

ttGridUserAssignedname returns the result:

Column

Type

Description

hostName

TT_VARCHAR (200)

The current default local host setting for the database. If a default has not been supplied then the current hostname is returned.

Example

CALL ttGriduserAssignedName ();

See also

ttGridAttach
ttGridCheckOwner
ttGridCreate
ttGridDestroy
ttGridDetach
ttGridDetachAll
ttGridDetachList
ttGridGlobalCGResume
ttGridGlobalCGSuspend
ttGridNameSet
"Configuring a cache grid" in Oracle In-Memory Database Cache User's Guide

ttHostNameGet

Description

This procedure returns the name of the current local host for the database. The value returned is only for the current session. It is not a systemwide setting and does not persist after the current session has been disconnected.

This procedure can be used to check whether a particular store name in a scheme refers to the current host. This can be helpful when configuring replication schemes.

Required privilege

This procedure requires no privilege.

Syntax

ttHostnameGet()

Parameters

ttHostNameGet has no parameters.

Result set

ttHostNameGet returns the result:

Column

Type

Description

hostName

TT_VARCHAR (200)

The current default local host setting for the database. If a default has not been supplied then the current hostname is returned.

Example

CALL ttHostNameGet ();

See also

ttHostNameSet
"Setting Up a Replicated System" in Oracle TimesTen In-Memory Database Replication Guide

ttHostNameSet

Description

This procedure specifies the name of the default local host for the current database. The value is only used in the current session, it is not a systemwide setting and does not persist after the current session has been disconnected.

To configure master/subscriber relationships and replication object permissions correctly, Replication DDL processing relies on being able to determine whether a host name used in a replication scheme refers to the computer on which the script is currently being run. This procedure allows an application to set a default host name for the current session that can be used by Replication DDL processing whenever there is a need to establish the name of the current host.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttHostnameSet('hostName')

Parameters

ttHostNameSet has the parameter:

Parameter

Type

Description

hostName

TT_VARCHAR (200)

The required default name for the local computer. If NULL is supplied the default value is cleared.

Result set

ttHostNameSet returns no results.

Example

CALL ttHostNameSet ('alias1');

Note

The legal value of hostName can be any host name or IP address string except "localhost", "127.0.0.1" or "::1". You cannot set the default host name to a value that is different from a local host name used in an existing replication scheme.

See also

ttHostNameGet
"Setting Up a Replicated System" in Oracle TimesTen In-Memory Database Replication Guide

ttIndexAdviceCaptureDrop

Description

This procedure drops existing capture data for either the current connection or for the database. Subsequent calls to ttIndexAdviceCaptureOutput at that level return no rows.

This procedure and the procedures related to it are referred to as the Index Advisor. For details on using these procedures, see "Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

This procedure requires no privileges to drop a connection level capture.

This procedure requires ADMIN privileges to drop a database level capture.

Syntax

ttIndexAdviceCaptureDrop(captureLevel)

Parameters

ttIndexAdviceCaptureDrop has this optional parameter:

Parameter

Type

Description

captureLevel

TT_INTEGER

Legal values for the capture level are:
0 - Index advice capture is dropped at the connection level for the current connection. This is the default.

1 - Index advice capture is dropped at the database level.

Result set

ttIndexAdviceCaptureDrop returns no results.

Example

CALL ttIndexAdviceCaptureDrop;

Note

To drop both connection level and database level captures, invoke the command twice, once for each capture level.

It is an error to call this command while a capture is in progress at the level you are attempting to drop.

See also

ttIndexAdviceCaptureEnd
ttIndexAdviceCaptureInfoGet
ttIndexAdviceCaptureOutput
ttIndexAdviceCaptureStart
ttOptStatsExport
"Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide

ttIndexAdviceCaptureEnd

Description

This procedure ends either an active connection level capture from the current connection or an active database level capture.

This procedure and the procedures related to it are referred to as the Index Advisor. For details on using these procedures, see "Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

This procedure requires no privilege to end a connection level capture.

This procedure requires ADMIN privileges to end a database level capture.

Syntax

ttIndexAdviceCaptureEnd(captureLevel)

Parameters

ttIndexAdviceCaptureEnd has this optional parameter:

Parameter

Type

Description

captureLevel

TT_INTEGER

Legal values for the capture level are:
0 - Ends index advice capture at the connection level for the current connection. This is the default.

1 - Ends index advice capture at the database level.

Result set

ttIndexAdviceCaptureEnd returns no results.

Example

The following example ends the collection for the connection level capture:

Call ttIndexAdviceCaptureEnd(0)

Note

To end both connection level and database level captures, invoke the command twice, once for each capture level.

It is an error to call this procedure without first starting a capture at the specified level by calling the ttIndexAdviceCaptureStart procedure.

See also

ttIndexAdviceCaptureDrop
ttIndexAdviceCaptureInfoGet
ttIndexAdviceCaptureOutput
ttIndexAdviceCaptureStart
ttOptStatsExport
"Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide

ttIndexAdviceCaptureInfoGet

Description

This procedure returns a row for each active capture. A capture is active if it has started capturing index advice or if it has stopped capturing index advice, but the capture data is still available.

One row relates to a connection level capture, if one exists. Another row relates to a database level capture, if one exists. At most there will be one connection level and one database capture.

If no capture is in progress or no data exists, this procedure does not return any rows.

This procedure and the procedures related to it are referred to as the Index Advisor. For details on using these procedures, see "Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

This procedure requires no privilege to get information on a connection level capture.

This procedure requires ADMIN privileges to get information on a database level capture.

Syntax

ttIndexAdviceCaptureInfoGet()

Parameters

ttIndexAdviceCaptureInfoGet has no parameters.

Result set

ttIndexAdviceCaptureInfoGet returns the result set:

Columns

Type

Description

captureState

TT_INTEGER NOT NULL

The state of the capture:
0 - A capture is not in progress.

1 - A capture is in progress

connID

TT_INTEGER

The connection ID of the connection that initiated the last capture, or the current capture if one is in progress.
This value is NULL if no capture has been initiated.

captureLevel

TT_INTEGER

The level of the most recent capture.
This value is NULL if no capture has been initiated.

captureMode

TT_INTEGER

The mode of the most recent capture.
This value is NULL if no capture has been initiated.

numPrepared

TT_INTEGER

The number of prepared statements during the capture period.
This value is NULL if no capture has been initiated.

numExecuted

TT_INTEGER

The number of executed statements during the capture period.
This value is NULL if no capture has been initiated.

captureStartTime

TT_TIMESTAMP

The time stamp taken at the start of the capture period.
This value is NULL if no capture has been initiated.

captureEndTime

TT_TIMESTAMP

The time stamp taken at the end of the capture period.
This value is NULL if no capture has been initiated.

Example

This example shows capture information for a completed connection level capture for 363 prepared statements and 369 executed statements:

Command> CALL ttIndexAdviceCaptureInfoGet();
< 0, 1, 0, 0, 363, 369, 2012-07-27 11:44:08.136833, 2012-07-27 12:07:35.410993 >
1 row found.

Note

If there is an active database level capture and you call this procedure on a connection that does not have ADMIN privilege, TimesTen returns an error.

See also

ttIndexAdviceCaptureDrop
ttIndexAdviceCaptureEnd
ttIndexAdviceCaptureOutput
ttIndexAdviceCaptureStart
ttOptStatsExport
"Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide

ttIndexAdviceCaptureOutput

Description

This built-in returns the list of create index recommendations from the last recorded capture at the specified level.

This procedure and the procedures related to it are referred to as the Index Advisor. For details on using these procedures, see "Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide.

For a connection level capture, run this procedure in the same connection that initiated the capture. For a database level capture, run this procedure in a connection with ADMIN privileges.

Required privilege

This procedure requires no privilege to get output on a connection level capture.

This procedure requires ADMIN privileges to get output on a database level capture.

Syntax

ttIndexAdviceCaptureOutput(captureLevel)

Parameters

ttIndexAdviceCaptureOutput has this optional parameter:

Parameter

Type

Description

captureLevel

TT_INTEGER

Legal values for the capture level are:
0 - Outputs index advice at the connection level for the current connection. This is the default value.

1 - Outputs index advice at the database level.

Result set

ttIndexAdviceCaptureOutput returns the result set:

Column

Type

Description

stmtCount

TT_INTEGER

The number of statements in the captured workload that would have benefited from this index if it were present.

createStmt

TT_VARCHAR (8300) NOT NULL

The executable statement that can be used to create an index.

Example

The following example provides the CREATE statement for an index called PURCHASE_i1 on the HR.PURCHASE table. There are four distinct statements that would benefit from the index in this SQL workload.

CALL ttIndexAdviceCaptureOutput();
< 4, create index PURCHASE_i1 on HR.PURCHASE(AMOUNT); >
1 row found.

Note

All names returned will be fully schema qualified.

See also

ttIndexAdviceCaptureDrop
ttIndexAdviceCaptureEnd
ttIndexAdviceCaptureInfoGet
ttIndexAdviceCaptureStart
ttOptStatsExport
"Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide

ttIndexAdviceCaptureStart

Description

This procedure enables index advice capture. It is recommended that statistics be updated before you call this procedure, using ttOptEstimateStats and setting the 'invalidate' parameter set to 'yes'. Updating the statistics in this way ensures statistics are up to date and forces statements to be re-prepared during the capture. To set statistics to known values instead, call ttOptSetTblStats with the 'invalidate' parameter set to 'yes'.

This procedure and the procedures related to it are referred to as the Index Advisor. For details on using these procedures, see "Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

This procedure requires no privilege to start a connection level capture.

This procedure requires ADMIN privileges to start a database level capture.

Syntax

ttIndexAdviceCaptureStart()

Parameters

ttIndexAdviceCaptureStart has this optional parameter:

Parameter

Type

Description

captureLevel

TT_INTEGER

Legal values for the capture level are:
0 - Outputs index advice at the connection level for the current connection. This is the default value.

1 - Outputs index advice at the database level.

captureMode

TT_INTEGER

Legal values for the capture mode are: 0 - Provides complete capture of index advice including execution of the SQL statements. This is the default.
31 - Capture is based only on the computed statistics and plan analysis. Queries (SELECT statements only) are prepared but not executed. This mode can only be used with connection level captures (captureLevel=0).

Result set

ttIndexAdviceCaptureStart returns no results

Example

The following example starts a collection for the Index Advisor at the connection-level.

Call ttIndexAdviceCaptureStart(0,0);

Note

It is an error to call this procedure if index advice is already being captured at the database level. Connection level captures can be issued concurrently on independent connections without conflict. Outstanding connection level captures that are in progress when a database level capture begins complete as intended.

See also

ttIndexAdviceCaptureDrop
ttIndexAdviceCaptureEnd
ttIndexAdviceCaptureInfoGet
ttIndexAdviceCaptureOutput
"Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide

ttLoadFromOracle

Description

This procedure takes a TimesTen table name, an Oracle SELECT statement and the number of threads for parallel load. It executes the query on Oracle and loads the result set into the specified TimesTen table.

The procedure requires the connection attribute UID, the connection attribute OraclePWD and the connection attribute OracleServiceName to be specified. You must commit after calling this procedure.

For more details and usage information, see "Loading Oracle data into a TimesTen table" in the Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

This procedure requires INSERT privileges to the table to be loaded.The session must have all the required privileges to execute the query on the Oracle database.

Syntax

ttLoadFromOracle(tblOwner, tblName, Query, numThreads)

Parameters

ttLoadFromOracle has these parameters:

Parameter

Type

Description

tblOwner

TT_CHAR (30)

TimesTen table owner.

tblName

TT_CHAR (30) NOT NULL

Name of the table to be created and loaded with Oracle data.
The specified TimesTen table cannot be a system table, a synonym, a view, a materialized view or a detail table of a materialized view, a global temporary table, a cache group table or a table that contains compressed columns.

Query

TT_VARCHAR (409600) NOT NULL

An Oracle SELECT query to derive the table column definition.
The Oracle query cannot have any parameter bindings. Any expressions in the SELECT list should be provided with a column alias; otherwise, an implementation dependent column name is assumed and the expression is not evaluated.

numThreads

TT_INTEGER

Number of threads for parallel load. If NULL, defaults to four.

Result set

ttLoadFromOracle returns the result set:

Column

Type

Description

numRows

BIGINT NOT NULL

A single number indicating the number of rows loaded.

Example

The following example selects information about employees from the Oracle HR.EMPLOYEES table and loads it into the TimesTen HR.EMPLOYEES table. If the table does not exist, this procedure creates the table. In this example information was found for 107 employees.

Command> CALL ttLoadFromOracle ('HR','EMPLOYEES','SELECT * FROM HR.EMPLOYEES');
< 107 >
1 row found.

Notes

TimesTen does not empty the table before the load. The target table does not require a primary key.TimesTen returns an error if the query output cannot be converted to rows in the target table due to a mismatch of column types or number of columns.Loading data into TimesTen LOB columns is not supported. If the Oracle query has LOB output, it is mapped to a variable type.

If the data from the Oracle query exceeds the TimesTen column size the data is truncated. LOB columns are truncated to 4MB.

See also

ttTableSchemaFromOraQueryGet

ttLockLevel

Description

Changes the lock level between row-level and database-level locking on the next transaction and for all subsequent transactions for this connection. Applications can change the lock level again by calling ttLockLevel again. The initial value depends on the LockLevel connection attribute. See "LockLevel" for full details of the different locking levels.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttLockLevel('lockLevel')

Parameters

ttLockLevel has the parameter:

Parameter

Type

Description

lockLevel

TT_CHAR (20) NOT NULL

Locking level for the connection.

The value of lockLevel may be one of two case-insensitive strings:

Row: Locking should be set to row-level locking.

DS: Locking should be set to database-level locking.

Result set

ttLockLevel returns no results.

Example

CALL ttLockLevel ('Row');

Notes

This procedure does not affect the current transaction.

Row-level locking is required when caching Oracle tables.

This procedure must be called from within a transaction. It has the effect of setting the locking level for subsequent transactions for the connection that invoked it. The new lock level does not affect the current transaction. It takes effect at the beginning of the next transaction.

See also

ttLockWait

ttLockWait

Description

This procedure allows an application to change the lock timeout interval of the current connection. The change takes effect immediately and applies to all subsequent statements in the current transaction and all subsequent transactions on the connection.

The lock wait interval is the number of seconds to wait for a lock when there is contention on it. You can also indicate a fraction of a second.

Lock wait intervals are imprecise, and may be exceeded, generally by no more than 100 milliseconds, due to the scheduling of the agent that detects timeouts. This imprecision does not apply to zero second timeouts, which are always reported immediately.

Cache grid uses message wait time with lock wait time. When using cache grid, lock wait times are approximately half the value you have specified. If your applications require the full lock wait time, specify twice the desired seconds.

Required privilege

This procedure requires no privilege.

Syntax

ttLockWait(seconds)

Parameters

ttLockWait has the required parameters:

Parameter

Type

Description

seconds

NUMBER (8,1) NOT NULL

Number of seconds to wait for a lock when there is contention on it. You can also specify fractions of a second. Values between 0.0 and 1000000.0 inclusive are accepted.

Result set

ttLockWait returns no results.

Examples

To indicate a six second lock wait, use:

CALL ttLockWait (6);

To indicate a tenth of a second lock wait, use:

CALL ttLockWait (0.1);

Notes

When a lock is not immediately available to a TimesTen transaction, it waits a predetermined amount of time to try to get the lock. After that it times out the lock request and returns error TT6003 to the application. By default, TimesTen uses a value of 10 seconds for lock timeouts. If a value of 0 is specified, transactions do not wait for any unavailable locks.

See also

ttLockLevel
LockLevel

ttLogHolds

Description

This procedure returns information about transaction log holds, including those created on behalf of incremental backups, replication peers, persistent XLA subscribers, XA, long-running transactions and checkpoints. This procedure can help diagnose situations where it appears that checkpoint operations are not purging all unneeded transaction log files.

Applications should monitor log holds and the accumulation of log files. For more information, see "Monitoring accumulation of transaction log files" in the Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

This procedure requires no privilege.

Syntax

ttLogHolds()

Parameters

ttLogHolds has no parameters.

Result set

ttLogHolds returns the result set:

Column

Type

Description

HoldLFN

TT_INTEGER NOT NULL

Returns the transaction log file number of the hold.

HoldLFO

TT_BIGINT NOT NULL

Returns the transaction log file offset of the hold

type

TT_CHAR (30) NOT NULL

Returns the type of hold, one of:
Checkpoint

Replication

Backup

XLA

Long-Running Transaction

Long-Running XA Transaction

description

TT_VARCHAR (1024) NOT NULL

Describes the type-specific object for which the hold was created. Each description corresponds with the Type returned. Descriptions are one of:

- The name of the checkpoint file

- The name of the replication subscriber

- The parallel replication track ID used by the subscriber

- The backup path

- The name of the persistent XLA subscription and the process ID of the last process to open it, if it is open

- The XID (transaction ID) of the XA transaction

- The TimesTen transaction ID of the long-running transaction

Example

CALL ttLogHolds();
< 0, 1148544, Long-Running XA Transaction , 0x1-476c6f62616c-5861637431 >
< 0, 1149752, Long-Running Transaction, 4.2 >
< 0, 1149992, Checkpoint , sample.ds1 >
< 0, 1150168, Checkpoint , sample.ds0 >

ttMonitorHighWaterReset

Description

This procedures set the value of PERM_IN_USE_HIGH_WATER column in the MONITOR table to the current value of PERM_IN_USE_SIZE connection attribute and sets the value of the TEMP_IN_USE_HIGH_WATER column in the MONITOR table to the current value of TEMP_IN_USE_SIZE connection attribute. These columns are useful for sizing databases during application development and deployment.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttMonitorHighWaterReset()

Parameters

ttMonitorHighWaterReset has no parameters.

Result set

ttMonitorHighWaterReset returns no results.

Example

CALL ttMonitorHighWaterReset();

ttOptClearStats

Description

This procedure clears the statistics for the specified table, causing the TimesTen query optimizer to use estimates or default values for subsequent queries involving the table. The procedure is useful if statistics are assumed to be out of date and an application wants to use built-in default values. This procedure removes all rows from the TBL_STATS and COL_STATS system tables that pertain to the specified tables. See "SYS.TBL_STATS" and "SYS.COL_STATS" in Oracle TimesTen In-Memory Database System Tables and Views Reference.

Required privilege

This procedure requires no privilege for the table owner. This procedure requires no privilege if tblName is not specified, because the procedure operates on the current user's tables if tblName is not specified.

This procedure requires the ALTER ANY TABLE privilege if user is not the table owner.

Syntax

ttOptClearStats('tblName', invalidate)

Parameters

ttOptClearStats has these parameters:

Parameter

Type

Description

tblName

TT_CHAR (61)

Name of an application table. Can include table owner. If tblName is the empty string or is not specified, statistics are cleared for all the current user's tables in the database.
Using a synonym to specify a table name is not supported.

invalidate

TT_INTEGER

0 (no) or 1 (yes). Default is 0.
If invalidate is 1, all commands that reference the affected tables are reprepared automatically when they are re-executed, including commands prepared by other users.

If invalidate is 0, the statistics are not considered modified and existing commands are not reprepared.

Result set

ttOptClearStats returns no results.

Example

CALL ttOptClearStats ( 'SALLY.ACCTS', 1 );

Clears the statistics for the SALLY.ACCTS table and reprepares all commands that affect the ACCTS table.

CALL ttOptClearStats();

Clears the statistics for all the current user's tables and reprepares all commands that affect these tables.

CALL ttOptClearStats('', 0);

Clears the statistics for all the current user's tables without repreparing commands that reference these tables.

See also

ttOptEstimateStats
ttOptSetColIntvlStats
ttOptSetFlag
ttOptSetOrder
ttOptSetTblStats
ttOptUpdateStats
ttPLSQLMemoryStats

ttOptCmdCacheInvalidate

Description

You can use this procedure to recompile or invalidate dependent commands. Scenarios in which you may want to call this procedure include:

- After all needed statistics have been collected.

- When table cardinalities have been changed significantly.

The procedure either marks the command as needing recompilation or as invalidated.

Neither option stops execution of the command.

Required privilege

This procedure requires the DDL privilege.

Syntax

ttOptCmdCacheInvalidate('tblName', invalidate)

Parameters

ttOptCmdCacheInvalidate has these parameters:

Parameter

Type

Description

tblname

TT_CHAR(61)

The name of the table for which the dependent commands should be invalidated or recompiled

action

TT_INTEGER

Recompiles or invalidates the dependent commands.

- 1 - Indicates that the commands should be recompiled. The command is recompiled during its first use after calling this built-in procedure. (default)

- 2 - Indicates that the commands should be invalidated. The command is not reused or recompiled again. If you call the command after you have marked it for invalidation, TimesTen returns an error.

Result set

ttOptCmdCacheInvalidate returns no results.

Example

To recompile dependent commands on the table tab1, use:

CALL ttOptCmdCacheInvalidate ('tab1', 1);

To invalidate the dependent commands on table tab1, use:.

CALL ttOptCmdCacheInvalidate ('tab1', 2);

See also

ttOptClearStats
ttOptEstimateStats
ttOptSetColIntvlStats
ttOptSetFlag
ttOptSetOrder
ttOptSetTblStats
ttOptUpdateStats
ttPLSQLMemoryStats

ttOptEstimateStats

Description

The ttOptEstimateStats procedure updates the statistics for the specified table. This procedure estimates statistics by looking at a random sample of the rows in the specified table(s). The sample size is the number of rows specified (if sampleStr has the form 'n ROWS') or a percentage of the total number of rows (if sampleStr has the form 'p PERCENT').

Required privilege

This procedure requires no privilege for the table owner. This procedure requires no privilege if tblName is not specified, because the procedure operates on the current user's tables if tblName is not specified.This procedure requires the ALTER ANY TABLE privilege if user is not the table owner.

Syntax

ttOptEstimateStats('tblName', invalidate, 'sampleStr')

Parameters

ttOptEstimateStats has these parameters:

Parameter

Type

Description

tblName

TT_CHAR(61)

Name of an application table. Can include table owner. If tblName is an empty string, statistics are estimated for all the current user's tables in the database.
Using a synonym to specify a table name is not supported.

invalidate

TT_INTEGER

0 (no) or 1 (yes). If invalidate is 1, all commands that reference the affected tables are automatically prepared again when re-executed, including commands prepared by other users. If invalidate is 0, the statistics are not considered to have been modified and existing commands are not reprepared. The invalidate parameter is optional and defaults to 0.

sampleStr

TT_VARCHAR (255) NOT NULL

String of the form 'n ROWS', where n is an INTEGER greater than zero; or 'p PERCENT', where p is a floating point number between 0.0 and 100.0 inclusive.

Result set

ttOptEstimateStats returns no results.

Examples

CALL ttOptEstimateStats ( 'ACCTS', 1, '5 PERCENT' );

CALL ttOptEstimateStats ( 'ACCTS', 1, '75 ROWS' );

Notes

The TimesTen statistics include the number of rows in each table, the number of unique values in each column, and the minimum and maximum values in each column. TimesTen assumes a uniform distribution of column values.

This procedure only runs faster than ttOptUpdateStats when you sample less than 50 percent of the rows in the table.

Estimates are not computed on columns that are longer than 2,048 bytes, and statistics for these columns are not updated. To update statistics on columns longer than 2,048 bytes, use the ttOptUpdateStats built-in procedure. (For varying length columns, this procedure updates statistics only if the column has a maximum length of 2,048 bytes or less.)

If a very small value is chosen for the sampleStr parameter, this procedure runs quickly but may result in suboptimal execution plans. For "good" distributions of data, a 10 percent selection is a good choice for computing statistics quickly without sacrificing plan accuracy. If the number of rows specified is sufficiently large or the table in question is sufficiently small, to improve performance TimesTen computes exact statistics anyway on all columns that have a length of 2,048 bytes or less. For example, the only difference between

ttOptEstimateStats ('ACCTS', 1, '100 PERCENT' )

and

ttOptUpdateStats( 'ACCTS', 1 )

is that the former does not compute statistics for long columns.

The statistics are stored in the TBL_STATS and COL_STATS system tables.

For performance reasons, ttOptEstimateStats does not hold a lock on tables or rows when computing statistics. However, computing statistics can still slow performance. Estimating statistics generally provides better performance than computing exact statistics.

If you estimate or update statistics with an empty table list, statistics on system tables are updated also, if you have privileges to update the system tables.

See also

ttOptSetColIntvlStats
ttOptSetFlag
ttOptSetOrder
ttOptSetTblStats
ttOptUpdateStats
ttPLSQLMemoryStats

ttOptGetColStats

Description

This procedure returns statistics information in text format.

Required privilege

This procedure requires the SELECT privilege on the specified tables.

Syntax

ttOptGetColStats('tblName', 'colName')

Parameters

ttOptGetColStats has these parameters:

Parameter

Type

Description

tblName

TT_CHAR (61)

Name of the table whose statistics are to be returned. If NULL is passed, then values for all tables are returned.
Using a synonym to specify a table name is not supported.

colName

TT_CHAR (30)

Name of the column for which statistics should be returned. If NULL is passed, statistics for all columns in the specified table are returned.

Result set

ttOptGetColStats returns the result set:

Column

Type

Description

tblName

TT_CHAR (30)

Name of the table.
Using a synonym to specify a table name is not supported.

colName

TT_CHAR (30)

Name of the column.

stats

TT_VARCHAR (409600) NOT NULL

Statistics in text form.

Examples

CALL ttOptGetColStats ();
< T1 , X1, (2, 10, 10, 100 (,4, 40, 10 ,1, 10, 5) ,(4, 20, 20 ,11, 20, 15) )>

See also

ttOptSetColStats
ttOptSetColIntvlStats

ttOptGetFlag

Description

This procedure returns the optimizer flag settings for the current transaction. The results are returned as a result set that can be retrieved using the ODBC SQLFetch function or the JDBC ResultSet.getXXX() method, just like the result of a SQL SELECT statement. Applications can request the value of a specific optimizer flag by passing the flag name to ttOptGetFlag. Alternatively, applications can request the values of all the optimizer flags by passing NULL. The optimizer flags and their meanings are described under the ttOptSetFlag built-in procedure.

Required privilege

This procedure requires no privilege.

Syntax

ttOptGetFlag('flagName')

Parameters

ttOptGetFlag has the parameter:

Parameter

Type

Description

flagName

TT_CHAR (32)

Name of the flag whose value is to be returned. If NULL is passed, then the values of all flags are returned.

Result set

ttOptGetFlag returns the result set:

Column

Type

Description

flagName

TT_VARCHAR (32) NOT NULL

Name of the flag. See "ttOptSetFlag" for a description of possible flag values.

value

TT_INTEGER NOT NULL

Current flag value, either 0 or 1.

Examples

CALL ttOptGetFlag('TmpHash');

See also

ttOptSetFlag

ttOptGetMaxCmdFreeListCnt

Description

This procedure returns the size of the free list of SQL compiled command cache. To reset the size of the cache, use ttOptSetMaxPriCmdFreeListCnt for materialized views and ttOptSetMaxCmdFreeListCnt for regular tables.

Required privilege

This procedure requires no privilege.

Parameters

ttOptGetMaxCmdFreeListCnt has no parameters.

Syntax

ttOptGetMaxCmdFreeListCnt()

Result set

ttOptGetMaxCmdFreeListCnt returns the results.

Column

Type

Description

retVal

TT_VARCHAR (200) NOT NULL

The size of the SQL compiled command cache.

Example

CALL ttOptGetMaxCmdFreeListCnt( );

See also

ttOptSetMaxPriCmdFreeListCnt
ttOptSetMaxCmdFreeListCnt

ttOptGetOrder

Description

This procedure returns a single-row result set containing the join order for the current transaction. This result set can be retrieved using the ODBC SQLFetch function or the JDBC ResultSet.getXXX() method, just like the result of a SQL SELECT statement. Join orders are described under the ttOptSetOrder built-in procedure.

Required privilege

This procedure requires no privilege.

Syntax

ttOptGetOrder( )

Parameters

ttOptGetOrder has no parameters.

Result set

ttOptGetOrder returns the result set:

Column

Type

Description

joinOrder

TT_VARCHAR(1024) NOT NULL

Optimizer join order for the current transaction.

Examples

CALL ttOptGetOrder;

See also

ttOptSetOrder

ttOptSetColIntvlStats

Description

This procedure modifies the statistics for the specified columns with interval information. This procedure allows an application to set statistics manually rather than have TimesTen automatically compute them. This feature is useful for preparing commands before the data has been inserted or for seeing how table characteristics can affect the choice of execution plan. This procedure modifies the relevant row(s) in the COL_STATS system table. Modifying interval statistics for a column that is not currently indexed has no effect.

Because this procedure can be used before any data are in the table, the values specified do not need to bear any relation to the actual values, although some basic validity checking is performed.

Required privilege

This procedure requires no privilege (if owner) or ALTER ANY TABLE privilege (if not owner).

Syntax

ttOptSetColIntvlStats('tblName', 'colName', invalidate, (stats))

Parameters

ttOptSetColIntvlStats has these parameters:

Parameter

Type

Description

tblName

TT_CHAR(61) NOT NULL

Name of an application table. Can include table owner. Using a synonym to specify a table name is not supported.

colName

TT_CHAR(30) NOT NULL

Name of a column in that table.

invalidate

TT_INTEGER

0 (no) or 1 (yes). If invalidate is 1, all commands that reference the affected tables are automatically prepared again when re-executed. This includes commands prepared by other users. If invalidate is 0, the statistics are not considered to have been modified and existing commands are not reprepared.

stats

VARBINARY (409600) NOT NULL

Sets stats for the column, using the format:
(numInterval integer, numNull integer, totUniq integer, totTups integer,

/* information for interval 1 */

(numUniq integer, numTups integer, frequency of most occurred value integer, minVal, maxVal, modalVal),

/* information for interval 2 */...)

The modal value (modalVal) is the value that occurs most often in a specified interval.

Because this parameter is a compound structure it cannot be parameterized using ODBC functions or described using the ttIsql describe command. For example, a statement like the following fails: SQLPrepare(hstmt, "call ttOptSetColIntvlStats('t1', 'c1', 1, ?)", SQL_NTS)).

Result set

ttOptSetColIntvlStats returns no results.

Example

To set the following statistics for column t1.x1:

- Two intervals

- Integer type

- 10 rows with null value

- 10 unique value

- 100 rows

- Interval 1 (4 unique values besides the most frequently occurring value, 40 rows with values other than most frequently occurring value, 10 rows with most frequently occurring value, min = 1, max = 10, mod = 5)

- Interval 2 (4 unique values besides the most frequently occurring value, 20 rows with values other than most frequently occurring, 20 rows with most frequently occurring value, min = 11, max = 20, mod = 15)

Use the statement:

CALL ttOptSetColIntvlStats('t1', 'x1', 1, (2, 10, 10, 100, (4, 40, 10, 1, 10, 5),
(4, 20, 20, 11, 20, 15)));

Notes

You must specify the minimum and maximum values in the interval as VARBINARY. NULL values are not permitted as minimum or maximum values. The value is stored in the platform-specific endian format.

See also

ttOptEstimateStats
ttOptGetColStats
ttOptSetColStats
ttOptSetTblStats
ttOptUpdateStats

ttOptSetColStats

Description

This procedure modifies the statistics for the specified columns. This procedure allows an application to set statistics manually rather than have TimesTen automatically compute them. This feature is useful for preparing commands before the data has been inserted or for seeing how table characteristics can affect the choice of execution plan. This procedure modifies the relevant row(s) in the COL_STATS system table.

Because this procedure can be used before the table is populated with data, the values specified do not need to bear any relation to the actual values, although some basic validity checking is performed.

Required privilege

This procedure requires no privilege (if owner) or ALTER ANY TABLE privilege (if not owner).

Syntax

ttOptSetColStats('tblName', 'colName', numUniq, minVal,maxVal,
invalidate, numNull)

Parameters

ttOptSetColStats has these parameters:

Parameter

Type

Description

tblName

TT_CHAR(61) NOT NULL

Name of an application table. Can include table owner.
Using a synonym to specify a table name is not supported.

colName

TT_CHAR(30) NOT NULL

Name of a column in that table.

num_Uniq

TT_INTEGER NOT NULL

Number of unique values in the column.

minVal

VARBINARY(1024) NOT NULL

Minimum value in the column (possibly truncated).

maxVal

VARBINARY(1024) NOT NULL

Maximum value in the column (possibly truncated).

invalidate

TT_INTEGER

0 (no) or 1 (yes). If invalidate is 1, all commands that reference the affected tables are automatically prepared again when re-executed. This includes commands prepared by other users. If invalidate is 0, the statistics are not considered to have been modified and existing commands are not reprepared.

num_Null

TT_INTEGER

Indicates the total number of NULLs in the column.

Result set

ttOptSetColStats returns no results.

Example

CALL ttOptSetColStats ('SALLY.ACCTS, 'BALANCE, 400, 0x00001388, 0x000186A0, 1, 0);

Notes

You must specify the minimum and maximum values as VARBINARY. NULL values are not permitted as minimum or maximum values. The value is stored in the platform-specific endian format.

The statistics are treated as a single interval of column values that are uniformly distributed between the minimum value and the maximum value.

See also

ttOptEstimateStats
ttOptGetColStats
ttOptSetColIntvlStats
ttOptSetTblStats
ttOptUpdateStats

ttOptSetFlag

Description

This procedure allows applications to alter the generation of execution plans by the TimesTen query optimizer. It sets flags to enable or disable the use of various access methods. The changes made by this call take effect during preparation of statements and affect all subsequent calls to the ODBC functions SQLPrepare and SQLExecDirect or the JDBC methods Connection.prepareCall and Statement.execute in the current transaction. All optimizer flags are reset to their default values when the transaction has been committed or rolled back. If optimizer flags are set while AutoCommit is on, they are ignored because each statement is executed within its own transaction.

Required privilege

This procedure requires no privilege.

Syntax

ttOptSetFlag('optFlag', optVal)

Parameters

ttOptSetFlag has these parameters:

Parameter

Type

Description

optFlag

TT_CHAR(32) NOT NULL

Name of optimizer flag.

optVal

TT_INTEGER NOT NULL

The value of the optimizer flag. The value is generally 0 (disable/disallow) or 1 (enable/allow), except as described under "Optimizer flags" below.

Optimizer flags

When setting the optimizer flags, use the following character strings, which are not case sensitive:

Flag

Description

BranchAndBound

Enables or disables branch and bound optimization. If enabled, TimesTen calculates the maximum cost of the query plan during a "zero phase," at the very beginning of the optimization process. If disabled, TimesTen does not perform this cost analysis.

DynamicLoadEnable

Enables or disables dynamic load of Oracle data to a TimesTen dynamic cache group. By default, dynamic load of Oracle data is enabled.

DynamicLoadErrorMode

Enables or disables dynamic load error mode. It controls output of error messages upon failure of a transparent load operation on a TimesTen dynamic cache group. Disabled by default.

FirstRow

Enables or disables first row optimization in a SELECT, UPDATE or DELETE statement. If the SQL keyword FIRST is used in the SQL statement, it takes precedence over this optimizer hint. The FIRST keyword enables first row optimization.

ForceCompile

Enables or disables forced compilation. If enabled, TimesTen recompiles the query and regenerates the query plan each time. If disabled, TimesTen does not compile the query plan even if it is available.

GenPlan

Enables or disables the creation of entries in the PLAN table for the rest of the transaction.
For an example, see "Generating a query plan" in Oracle TimesTen In-Memory Database Operations Guide.

GlobalProcessing

Enables or disables global execution of SELECT and UNLOAD CACHE GROUP statements in a grid. By default, these statements are executed locally.
0 - SELECT and UNLOAD CACHE GROUP statements are executed locally.

1 - SELECT and UNLOAD CACHE GROUP statements are executed globally.

See Oracle In-Memory Database Cache User's Guide for more details.

Hash

Enables or disables the use of existing hash indexes in indexed table scans.

HashGb

Enables or disables the use of hash groups.

IndexedOR

Enables or disables serialized table scans. If disabled, TimesTen uses serialized table scans for IN...list conditions, else TimesTen uses multiple index scans for an OR condition.

MergeJoin

Enables or disables the use of merge joins.

NestedLoop

Refers to a common way of joining two tables.

NoRemRowIdOpt

Enables or disables internal generation of RowIDs. If enabled, RowIDs are not internally generated for optimization purposes. If disabled, RowIDs may be internally generated, even if the row is not in the SELECT list.

PassThrough

Temporarily changes the pass through level for IMDB Cache applications. The pass through level can be set at any time and takes effect immediately. Legal values for this flag are:
0 (default) - SQL statements are executed only on TimesTen.

1 - INSERT, UPDATE and DELETE statements are executed on TimesTen unless they reference one or more tables that are not in TimesTen. If they reference one or more tables not in TimesTen, they are passed through to the Oracle database. DDL statements are executed on TimesTen. Other statements are passed through to the Oracle database if they generate a syntax error in TimesTen or if one or more tables referenced within the statement are not in TimesTen.

2 - INSERT, UPDATE and DELETE statements performed on tables in read-only cache groups or user managed cache groups with the READONLY cache table attribute are passed through to the Oracle database. Passthrough behavior for other cache group types is the same as PassThrough=1.

3 - All statements are passed through to the Oracle database for execution, except that INSERT, UPDATE and DELETE statements issued on cache tables in a dynamic AWT global cache group result in a TimesTen error.

4 - SELECT statements issues on cache tables in a dynamic AWT global cache group that do not satisfy the criteria for a dynamic load query are passed through to the Oracle database for execution. Otherwise, statements are executed in the TimesTen database.

5 - SELECT statements issued on cache tables in a dynamic AWT global cache group that do not satisfy the criteria for a dynamic load query are passed through to the Oracle database for execution when all committed updates on cache tables in dynamic AWT global cache groups by previous transactions within the connection have been propagated to the Oracle database. Otherwise, statements are executed in the TimesTen database.

RowLock

Allows or disallows the optimizer to consider using row locks.

Scan

Refers to full table scans.

Rowid

Enables or disables the use of Row IDs.

ShowJoinOrder

Shows the join order of the tables in an optimizer scan.

TmpHash

Enables or disables the use of a temporary hash scan. This is an index that is created during execution for use in evaluating the statement. Though index creation is time-consuming, it can save time when evaluating join predicates.

TblLock

Enables or disables the optimizer to consider using table locks.

TmpTable

Stores intermediate results into a temporary table. This operation is sometimes chosen to avoid repeated evaluation of predicates in join queries or sometimes just to allow faster scans of intermediate results in joins.

TmpTtree

Performs a temporary range scan. Can also be used so that values are sorted for a merge join. Though index creation is time-consuming, it can save time when evaluating join predicates.

Ttree

Enables or disables the use of existing range indexes in indexed table scans.

UseBoyerMooreStringSearch

Enables or disables the Boyer-Moore string search algorithm. If enabled, Boyer-Moore string search algorithm is enabled. This can improve performance of LIKE operations.

In addition, the string AllFlags can be used to refer to all optimizer flags, and the string Default can be used to refer to the default flags. Default excludes the GenPlan flag but includes all other optimizer flags.

Flag description

The value of each flag can be 1 or 0:

- If 1, the operation is enabled.

- If 0, the operation is disabled unless absolutely necessary.

- Initially, all the flag values except GenPlan are 1 (all operations are permitted).

For example, an application can prevent the optimizer from choosing a plan that stores intermediate results:

ttOptSetFlag ( 'TmpTable', 0 )

Similarly, an application can specify a preference for MergeJoin:

ttOptSetFlag ( 'NestedLoop', 0 )

In the second example, the optimizer may still choose a nested loop join if a merge join is impossible (for example, if there is no merge-join predicate). Similarly, the optimizer may occasionally not be able to satisfy an application request to avoid table scans (when the Scan flag is set to 0).

You cannot specify that a particular operation is prohibited only at a certain step of a plan or that a particular join method always be done between two specific tables. Similarly, there is no way to specify that certain indexes be used or that a hash index be used to evaluate a specific predicate. Each operation is either fully permitted or fully restricted.

When a command is prepared, the current optimizer flags, index hints and join order are maintained in the structure of the compiled form of the command and are used if the command is ever reprepared by the system. See "The TimesTen Query Optimizer" in Oracle TimesTen In-Memory Database Operations Guide for an example of reprepared statements.

If both RowLock and TblLock are disabled, TimesTen uses row-locking. If both RowLock and TblLock are enabled, TimesTen uses the locking scheme that is most likely to have better performance:

TblLock status

RowLock status

Effect on the optimizer

Disabled

Disabled

Use row-level locking.

Enabled

Disabled

Use table-level locking.

Disabled

Enabled

Use row-level locking.

Enabled

Enabled

Optimizer chooses row-level or table-level locking.

In general, table-level locking is useful when a query accesses a significant portion of the rows of a table and/or when there are very few concurrent transactions accessing the table.

Result set

ttOptSetFlag returns no results.

Example

CALL ttOptSetFlag ('TmpHash', 1);

See also

ttOptEstimateStats
ttOptGetFlag
ttOptGetOrder
ttOptSetColIntvlStats
ttOptSetOrder
ttOptSetTblStats
ttOptUpdateStats
ttPLSQLMemoryStats

ttOptSetMaxCmdFreeListCnt

Description

This procedure sets the maximum count of the free list of SQL compiled commands for regular tables. To get the current setting use the ttOptGetMaxCmdFreeListCnt procedure.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttOptSetMaxCmdFreeListCnt(maxCnt)

Parameters

ttOptSetMaxCmdFreeListCnt has the required parameter:

Parameter

Type

Description

maxCnt

TT_INTEGER NOT NULL

The max number of free SQL compiled commands for regular tables.

Result set

ttOptSetMaxCmdFreeListCnt returns no results.

Example

CALL ttOptSetMaxCmdFreeListCnt(40);

See also

ttOptGetMaxCmdFreeListCnt

ttOptSetMaxPriCmdFreeListCnt

Description

This procedure sets the maximum count of the free list of SQL compiled commands that perform materialized view maintenance.

When this command is set, freeable materialized view compiled commands are counted separately from those of regular tables. If this command is not set, materialized view compiled commands are counted as regular commands.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttOptSetMaxCmdPriFreeListCnt(maxCnt)

Parameters

ttOptSetMaxPriCmdFreeListCnt has the required parameter:

Parameter

Type

Description

maxCnt

TT_INTEGER NOT NULL

The size of the SQL compiled command cache.

Result set

ttOptSetMaxPriCmdFreeListCnt returns no results.

Example

CALL ttOptSetMaxPriCmdFreeListCnt(40);

See also

ttOptGetMaxCmdFreeListCnt
ttOptSetMaxCmdFreeListCnt

ttOptSetOrder

Description

This procedure specifies the order in which tables should be joined by the optimizer. The character string is a list of correlation names referenced in the query or a subquery, separated by spaces (not commas). The table listed first is scanned first by the plan. (It is outermost in a nested loop join, for example.) A correlation name is a shortcut or alias for a qualified table name.

Required privilege

This procedure requires no privilege.

Syntax

ttOptSetOrder('joinOrder')

Parameters

ttOptSetOrder has the required parameter:

Parameter

Type

Description

join_Order

TT_VARCHAR(1024)

List of space-separated table correlation names. If an owner is required to distinguish the table name, use a table correlation name. If the joinOrder is not specified the query optimizer reverts to its default behavior.

Result set

ttOptSetOrder returns no results.

Examples

CALL ttOptSetOrder ('EMPS DEPTS ACCTS');

Use the correlation name instead of the actual table name when specifying the join order.

If an application makes the call:

call ttOptSetOrder('ORDERS CUSTOMERS');

The optimizer scans the ORDERS table before scanning the CUSTOMERS when evaluating the following query that lists all the customers who have at least one unshipped order:

SELECT CUSTOMERS.NAME
FROM  CUSTOMERS
WHERE EXISTS (SELECT 1
FROM  ORDERS
WHERE CUSTOMERS.ID = ORDERS.CUSTID
AND  ORDER.STATUS ='UN-SHIPPED');

Consider an application that makes the following call.

ttOptSetOrder('DEPTS EMPS ACCTS');

The optimizer is prevented from executing a join between DEPTS and ACCTS when evaluating the number of employees working on a specific account:

SELECT COUNT(DISTINCT EMPS.ID)
FROM  ACCTS, DEPTS, EMPS
WHERE ACCTS.DEPTS = DEPTS.ID
AND  EMPS.DEPTS = DEPTS.ID
AND  ACCTS.NUM = :AcctNum

If the application does not reset the join order and tries to prepare a command that does not reference each of the three tables (and no others), the optimizer issues warning number 965. The specified join order is not applicable. TimesTen considers valid join orders and ignores the specified join order when preparing the command.

Notes

A table alias name for a derived table is not supported in the join order. If you specify a table alias name, TimesTen returns the warning message 965 that indicates the order cannot be honored.

The string length is limited to 1,024 bytes. If a string exceeds this length, it is truncated and a warning is issued.

When correlation names referenced in subqueries are in included in the order, TimesTen may internally change the isolation mode.

When a command is prepared, the current optimizer flags, index hints, and join order are maintained in the structure of the compiled form of the command and are used if the command is ever reprepared by the system. See "The TimesTen Query Optimizer" in Oracle TimesTen In-Memory Database Operations Guide for an example of reprepared statements.

The changes made by this call take effect immediately and affect all subsequent calls to the ODBC function SQLPrepare or the JDBC method Connection.prepareCall in the current transaction. The query optimizer reverts to its default behavior for subsequent transactions.

The tables referenced by a query must exactly match the names given if the join order is to be used (the comparisons are not case sensitive). A complete ordering must be specified; there is no mechanism for specifying partial orders. If the query has a subquery then the join order should also reference the correlation names in the subquery. In essence, the join order should reference all the correlation names referenced in the query. The TimesTen optimizer internally implements a subquery as a special kind of join query with a GROUP BY. For the join order to be applicable it should reference all the correlation names. If there is a discrepancy, a warning is issued and the specified join order is ignored completely.

See also

ttOptEstimateStats
ttOptGetFlag
ttOptGetOrder
ttOptSetColIntvlStats
ttOptSetFlag
ttOptSetTblStats
ttOptUpdateStats
ttPLSQLMemoryStats

ttOptSetTblStats

Description

This procedure modifies the statistics for the specified table. This procedure allows an application to set statistics explicitly rather than have TimesTen automatically compute them.

Required privilege

This procedure requires no privilege (if owner) or ALTER ANY TABLE privilege (if not owner).

Syntax

ttOptSetTblStats('tblName', numRows, invalidate)

Parameters

ttOptSetTblStats has these parameters:

Parameter

Type

Description

tblName

TT_CHAR(61) NOT NULL

Name of an application table. Can include table owner.
Using a synonym to specify a table name is not supported.

num_Rows

TT_INTEGER NOT NULL

Number of rows in the table.

invalidate

TT_INTEGER

0 (no) or 1 (yes). If invalidate is 1, all commands that reference the affected tables are automatically prepared again when re-executed, including commands prepared by other users. If invalidate is 0, the statistics are not considered to have been modified and existing commands are not reprepared.

Result set

ttOptSetTblStats returns no results.

Example

CALL ttOptSetTblStats ( 'ACCTS', 10000, 0 );

Note

This feature is useful for preparing commands before the data has been inserted or for seeing how table size can affect the choice of an execution plan. Because the command can be used before any data are in the table, the values specified do not need to bear any relation to the actual values. This procedure modifies the relevant row(s) in the TBL_STATS system table. See "SYS.TBL_STATS" in Oracle TimesTen In-Memory Database System Tables and Views Reference.

See also

ttOptEstimateStats
ttOptGetFlag
ttOptGetOrder
ttOptSetColIntvlStats
ttOptSetFlag
ttOptSetOrder
ttOptUpdateStats
ttPLSQLMemoryStats

ttOptShowJoinOrder

Description

This procedure returns the join order of the last prepared or executed SQL statement (SELECT, UPDATE, DELETE, and INSERT SELECT) in the current transaction. For a join order to be collected, use ttOptSetFlag('ShowJoinOrder', 1) or set the ttIsql "ShowJoinOrder" command to ON (1) first in the same transaction. AUTOCOMMIT must be off when using either of these commands. The join order is represented by table names.

Required privilege

This procedure requires no privilege.

Syntax

ttOptShowJoinOrder()

Parameters

ttOptShowJoinOrder has no parameters.

Result set

ttOptShowJoinOrder returns the result:

Column

Type

Description

tblName

TT VARCHAR (4096) NOT NULL

Table names, including owner name quantifiers and correlation name for each table if specified. Table names are returned in parentheses.
Using a synonym to specify a table name is not supported.

Example

>AUTOCOMMIT 0;
> CALL ttOptSetFlag ('ShowJoinOrder', 1);
>PREPARE SELECT * FROM t1;
>CALL ttOptShowJoinOrder();
>( T1 )

Notes

You must call ttOptSetFlag('ShowJoinOrder', 1) or set the ttIsql "ShowJoinOrder" command to ON (1) before using this procedure.

This procedure works within one transaction and is not persistent across transactions.

See also

ttOptEstimateStats
ttOptGetFlag
ttOptGetOrder
ttOptSetColIntvlStats
ttOptSetFlag
ttOptSetOrder
ttOptSetTblStats
ttOptUpdateStats
ttPLSQLMemoryStats

ttOptStatsExport

Description

This procedure returns the set of statements required to restore the table statistics to the current state. If no table is specified, it returns the set of statements required to restore the table statistics for all user tables that the calling user has permission to access.

Required privilege

This procedure requires ADMIN privilege.

Syntax

ttOptStatExport('tblName')

Parameters

ttOptStatsExport has the parameter:

Parameter

Type

Description

tblName

TT_CHAR (61) NOT NULL

Name of the table whose statistics are to be returned. If NULL is passed, then values for all tables are returned.
Using a synonym to specify a table name is not supported.

Result set

ttOptStatsExport returns the result set:

Column

Type

Description

stmt

TT_VARCHAR (8300) NOT NULL

The set of statements required to restore the table(s) statistics to the current state.

Examples

CALL ttOptStatsExport('MyTable');

See also

ttIndexAdviceCaptureDrop
ttIndexAdviceCaptureEnd
ttIndexAdviceCaptureInfoGet
ttIndexAdviceCaptureOutput
ttIndexAdviceCaptureStart
"Using the Index Advisor to recommend indexes" in the Oracle TimesTen In-Memory Database Operations Guide

ttOptUpdateStats

Description

This procedure updates the statistics for the specified table. TimesTen looks at the databases in the table and updates the TBL_STATS and COL_STATS system tables. If the table is large, this process can take some time. Statistics are not computed automatically as rows are updated; an application must compute them explicitly by calling this procedure.

Required privilege

This procedure requires no privilege for the table owner. This procedure requires no privilege if tblName is not specified, because the procedure operates on the current user's tables if tblName is not specified.This procedure requires the ALTER ANY TABLE privilege if user is not the table owner.

Syntax

ttOptUpdateStats('tblName', invalidate, option)

Parameters

ttOptUpdateStats has these parameters:

Parameter

Type

Description

tblName

TT_CHAR(61)

Name of an application table. Can include table owner. If a value of NULL or an empty string is provided, the statistics for all the current user's tables are updated.
Using a synonym to specify a table name is not supported.

invalidate

TT_INTEGER

0 (no) or 1 (yes). If invalidate is 1, marks all commands for reprepare on next execution except ALTER TABLE DROP TABLE, and the ALTER TABLE ADD COLUMN FOR SELECT * FROM TABLE statements. These exceptions require manual reprepare. If invalidate is 0, the statistics are not considered to have been modified and existing commands are not reprepared.
The invalidate parameter is optional and defaults to 0.

option

TT_INTEGER

Specifies whether to collect complete interval statistics information. Valid values for this option are:
NULL or 0 - Collect complete interval statistics only if a range index exists on the column. If a range index does not exist, only single interval statistics are collected.

1 - Do not collect complete interval statistics. Only single interval statistics are collected.

See "Notes" below for more information.

Result set

ttOptUpdateStats returns no results.

Example

CALL ttOptUpdateStats ( 'ACCTS', 1 );

Updates the ACCTS table and causes all commands that reference the ACCTS table to be re-prepared when they are next executed.

CALL ttOptUpdateStats('', 1);

Updates all the current user's tables and causes commands on those tables to be reprepared when they are next executed.

CALL ttOptUpdateStats('ACCTS', 0, 1);

Forces single interval statistics to be collected.

Notes

If the table name specified is an empty string, statistics are updated for all the current user's tables.

When complete interval statistics are collected, the total number of rows in the table is divided into 20 or less intervals and the distribution of each interval is recorded in the statistics. The new statistics contain the information:

- Number of intervals

- Total number of NULLs in the column

- Total number of NON NULL UNIQUE values in the column

- Total number of rows in the table

- Interval information; each interval contains:

- The minimum value

- The maximum value

- The most frequently occurring value

- The number of times the most frequent value occurred

- The number of rows that have different values than the most frequent value

- The number of unique values besides the most frequent value

Collection of complete interval statistics requires the data to be sorted.

If complete interval statistics are not selected, then statistics are collected by treating the entire distribution as a single interval.

For performance reasons, TimesTen does not hold a lock on tables or rows when computing statistics. However, computing statistics can still slow performance. Estimating statistics generally provides better performance than computing exact statistics. See "ttOptEstimateStats" for information on estimating statistics.

If you estimate or update statistics with an empty table list, statistics on system tables are updated also, if you have privileges to update the system tables.

See also

ttOptEstimateStats
ttOptGetColStats
ttOptSetColStats
ttOptSetColIntvlStats
ttOptSetTblStats
ttOptUpdateStats

ttOptUseIndex

Description

This procedure allows applications to alter the generation of execution plans by the TimesTen query optimizer. It allows applications to disable the use of a set of indexes or enable the consideration of only a set of indexes for each correlation used in a query. Enabling the consideration of an index does not guarantee that the plan generated uses the index. Depending on the estimated cost, the optimizer might choose to use a serialization scan or a materialization scan to access the associated correlation if these scans resulted in a better plan than the ones that use the specified index.

The changes made by this call take effect immediately and affect all subsequent calls to the ODBC functions SQLPrepare and SQLExecDirect or the JDBC methods Connection.prepareCall and Statement.execute in the current transaction until the applications explicitly issue a call to clear it. The setting is cleared whenever a new transaction is started.

Required privilege

This procedure requires no privilege.

Syntax

ttOptUseIndex('IndexName, CorrelationName, 0 | 1 [;...]')

Parameters

ttOptUseIndex has a single string parameter, indOption, of type TT_VARCHAR(1024) with these components:

Component

Description

IndexName

The name of the user-defined index or '_TMPRANGE' for temporary range index or '_TMPHASH' for temporary hash index. If index name is omitted, the setting applies to all indexes of the specified correlation.

CorrelationName

The correlation name of the table. If a table is defined with a correlation name in the FROM clause, use this correlation name instead of the table name when specifying the index hint for this table. If correlation name is omitted for an entry, the setting affects all tables with the specified index name.

0 | 1

Disables(0) or enables (1) the use of the index specified by IndexName.

Result set

ttOptUseIndex returns no results.

Examples

CALL ttOptUseIndex('"3456"."1234", t1, 0');

CALL ttOptUseIndex('data1.i1, data1.t1, 0');

CALL ttOptUseIndex('i1, t1, 0');

Note

If ttOptUseIndex is called without a parameter or with a NULL value, TimesTen clears the previous index hint.

See also

ttOptEstimateStats
ttOptGetFlag
ttOptGetOrder
ttOptSetColIntvlStats
ttOptSetFlag
ttOptSetOrder
ttOptSetTblStats
ttOptUpdateStats
ttPLSQLMemoryStats

ttPLSQLMemoryStats

Description

This procedure returns result statistics about PL/SQL library cache performance and activity.

Required privilege

This procedure requires no privilege.

Syntax

ttPLSQLMemoryStats(paramName, paramValue )

Parameters

ttPLSQLMemoryStats takes no parameters.

Parameters

ttPLSQLMemoryStats returns the results in the following columns:

Columns

Type

Description

paramName

TT_VARCHAR(30) NOT NULL

The name of the result statistic returned in this row.

paramValue

BINARY_FLOAT NOT NULL

The value of the result statistic returned in this row.

The following statistics are returned:

- Gets: Number of times a lock was requested for a PL/SQL object.

- GetHits: Number of times a PL/SQL object's handle was found in memory.

- GetHitRatio: Ratio of GetHits to Gets.

- Pins: Number of times a PIN was requested for PL/SQL objects.

- PinHits: Number of times all the metadata pieces of the library object were found in memory.

- PinHitRatio: Ratio of PinHits to Pins.

- Reloads: Any PIN of an object that is not the first PIN performed since the object handle was created, and which requires loading the object from the database.

- Invalidations: Total number of times objects in this namespace were marked invalid because a dependent object was modified.

- CurrentConnectionMemory: The total amount of heap memory, in Megabytes, allocated to PL/SQL on this database connection.

- DeferredCleanups: Total number of times a deferred cleanup occurred.

Examples

connect "DSN=sample";
Connection successful:
DSN=sample;UID=timesten;DataStore=/scratch/timesten/sample;
DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=AL32UTF8;PermSize=128;
TypeMode=0;PLSQL_MEMORY_SIZE=32;PLSQL_MEMORY_ADDRESS=20000000;PLSQL=1;
(Default setting AutoCommit=1)
Command> create procedure hello is begin dbms_output.put_line('Hello, World!');
end;
> /
Procedure created.
Command> call ttPlsqlMemoryStats;
< Gets, 485.00000 >
< GetHits, 444.000000 >
< GetHitRatio, .9154639 >
< Pins, 260.00000 >
< PinHits, 178.000000 >
< PinHitRatio, .6846154 >
< Reloads, 4.000000 >
< Invalidations, 0.000000e+00 >
< CurrentConnectionMemory, 56.00000 >
9 rows found.

ttRamPolicyAutoReloadGet

Description

This procedure returns the RAM autoreload policy used to determine if a database is reloaded into RAM after an invalidation. The policy can be either autoreload or noautoreload.

Required privilege

This procedure requires no privilege.

Syntax

ttRamPolicyAutoReloadGet()

Result set

ttRamPolicyAutoReloadGet returns the results:

Column

Type

Description

ramPolicyAutoreload

TT_INTEGER

The policy used to determine if the database is reloaded into RAM after an invalidation. Valid values are:
0 - The database is not automatically reloaded into memory after an invalidation. This is the equivalent of the command ttAdmin -noAutoReload.

1 - The database is automatically reloaded into memory after an invalidation. This is the equivalent of the command ttAdmin -autoReload. This is the default autoreload policy.

Parameters

ttRamPolicyAutoReloadGet has no parameters.

Examples

To view the RAM autoreload policy, use:

CALL ttRamPolicyAutoReloadGet();

See also

ttAdmin
ttRamPolicyAutoReloadSet

ttRamPolicyAutoReloadSet

Description

This procedure determines the RAM autoreload policy if a database is invalidated. The policy can be either autoreload or noautoreload.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRamPolicyAutoReloadSet(ramPolicyAutoReload)

Parameters

ttRamPolicyAutoReloadSet has the parameters:

Parameter

Type

Description

ramPolicyAutoreload

TT_INTEGER NOT NULL

The policy used to determine if the database is reloaded into RAM after an invalidation. Valid values are:
0 - The database is not automatically reloaded into memory after an invalidation. This is the equivalent of the command ttAdmin -noAutoReload.

1 - The database is automatically reloaded into memory after an invalidation. This is the equivalent of the command ttAdmin -autoReload. This is the default autoreload policy.

Result set

ttRamPolicyAutoReloadSet returns no results.

Examples

To automatically reload a database into RAM after an invalidation, use:

CALL ttRamPolicyAutoReloadSet(1);

See also

ttAdmin
ttRamPolicyAutoReloadGet

ttRamPolicyGet

Description

This procedure returns the RAM policy used to determine when a database is loaded into memory. The policy can be either always, manual, or inUse.

Required privilege

This procedure requires no privilege.

Syntax

ttRamPolicyGet()

Result set

ttRamPolicyGet returns the results:

Column

Type

Description

ramPolicy

TT_VARCHAR (10)

The policy used to determine when the database is loaded into system RAM. Valid values are:
always - Specifies that the database should remain in system RAM all the time.

manual - Specifies that the database is only to be loaded in system RAM when explicitly loaded by the user, using the ttAdmin -ramLoad command.

inUse - Specifies that the database is only loaded in system RAM when in use (i.e., when applications are connected). This option cannot be used with temporary databases. TimesTen only allows a temporary database to be loaded into RAM manually. Trying to set the policy generates a warning.

ramGrace

TT_INTEGER

If the ramPolicy is inUse, this field reports the number of seconds the database is kept in RAM after the last application has disconnected. Otherwise, this field is NULL.

Parameters

ttRamPolicyGet has no parameters.

Examples

To view the RAM policy, use:

CALL ttRamPolicyGet();

See also

ttAdmin
ttRamPolicySet
"Specifying a RAM policy" in Oracle TimesTen In-Memory Database Operations Guide

ttRamPolicySet

Description

This procedure defines the policy used to determine when a database is loaded into memory. The policy can be either always, manual, or inUse.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRamPolicySet('ramPolicy', ramGrace)

Parameters

ttRamPolicySet has the parameters:

Parameter

Type

Description

ramPolicy

TT_VARCHAR (10) NOT NULL

The policy used to determine when the database is loaded into system RAM. Valid values are:
always - Specifies that the database should remain in system RAM all the time.

manual - Specifies that the database is only to be loaded in system RAM when explicitly loaded by the user, using the ttAdmin -ramLoad command.

inUse - Specifies that the database is only loaded in system RAM when in use (i.e.:when applications are connected). This option cannot be used with temporary databases. TimesTen only allows a temporary database to be loaded into RAM manually. Trying to set the policy generates a warning.

ramGrace

TT_INTEGER

Sets the number of seconds the database is kept in RAM after the last application has disconnected. This number is only effective if ramPoliy is inUse. This parameter is optional, and when omitted or set to NULL, the existing ramGrace period is left unchanged.

Result set

ttRamPolicySet returns no results.

Examples

To set the policy for loading a database into RAM to be inUse and for the database to kept in RAM for 10 seconds after the last application has disconnected, use:

CALL ttRamPolicySet('inUse', 10);

See also

ttAdmin
ttRamPolicyGet
"Specifying a RAM policy" in Oracle TimesTen In-Memory Database Operations Guide

ttRedundantIndexCheck

Description

This procedure scans the indicated table (or all the current user's tables) to find redundant indexes. It returns the names of the redundant indexes and a suggestion for which to drop.

Required privilege

This procedure requires no privilege.

Syntax

ttRedundantIndexCheck('tblname')

Parameters

ttRedundantIndexCheck has the parameter:

Parameter

Type

Description

tblName

TT_CHAR(61)

Name of an application table. Can include table owner. If a value of NULL or an empty string is provided, the redundant indexes for all the current user's tables.
Using a synonym to specify a table name is not supported.

Result Set

ttRedundantIndexCheck returns the result:

Column

Type

Description

redundancy

TT_VARCHAR (1024) NOT NULL

The names of redundant indexes and a suggestion for which index to drop.

Example

Create table y with a primary key. Then create index i. TimesTen returns a warning that a redundant index is being created. Create another index, i1. The command fails and TimesTen returns an error. Call this procedure to show the warnings.

CREATE TABLE y (ID tt_integer primary key);
CREATE INDEX i ON y (id);

Warning 2240: New non-unique index I has the same key columns as existing
unique index Y; consider dropping index I

CREATE INDEX i1 ON y (id);

2231: New index I1 would be identical to existing index I The command failed.

CALL ttredundantindexcheck ('y');

< Non-unique index SCOTT.Y.I has the same key columns as unique index SCOTT.Y.Y;
consider dropping index SCOTT.Y.I >
1 row found.

ttRepDeactivate

Description

This procedure changes the state of the active database in an active standby pair from ACTIVE to IDLE. Use this procedure when reversing the roles of the master databases in an active standby pair.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepDeactivate()

Parameters

ttRepDeactivate has no parameters.

Result set

ttRepDeactivate returns no results.

Example

To deactivate the active database in an active standby pair, use:

CALL ttRepDeactivate();

See also

ttRepTransmitGet
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStateSave
ttRepStateSet
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttReplicationStatus

Description

This procedure returns the status of one or more replication peer databases.

Required privilege

This procedure requires no privilege.

Syntax

ttReplicationStatus('receiver', 'hostname')

Parameters

ttReplicationStatus has the optional parameters:

Parameter

Type

Description

receiver

TT_VARCHAR(200)

Subscriber of interest or NULL for all subscribers. If the parameter is provided, then it names a replication subscriber about which information is sought. If the parameter is not provided, then information on replication subscribers defined for the current database is returned.

hostname

TT_VARCHAR(200)

The host name of one or more stores that are configured to receive updates from the executing store; if NULL, then receiving stores are identified by subscriber alone. If both receiver and hostname are NULL, then all receiving stores are selected.

Result set

ttReplicationStatus returns the result set:

Column

Type

Description

subscriber

TT_VARCHAR(200) NOT NULL

Subscriber name.

hostName

TT_VARCHAR(200) NOT NULL

Host name.

port

TT_INTEGER NOT NULL

Defined port number.

pState

TT_CHAR(10) NOT NULL

Peer state. The values of the result column are:
start - Replication is enabled to this peer.

pause - Replication is temporarily paused to this peer.

stop - Replication updates are NOT being collected for this peer.

failed - Replication to a subscriber is considered failed because the threshold limit (log data) has been exceeded. This state is set by the system.

logs

TT_INTEGER NOT NULL

Number of transaction log files held for this peer.

lastMsg

TT_INTEGER

Seconds since last interaction or NULL.

replicationName

TT_CHAR(30) NOT NULL

Name of replication scheme.

replicationOwner

TT_CHAR(30) NOT NULL

Owner of replication scheme.

Example

CALL ttReplicationStatus('System8');

Notes

If the receiver parameter is not NULL, only the status of the given receiver is returned. If the receiver parameter is NULL, the status of all subscribers is returned.

This procedure is supported only for TimesTen Data Manager ODBC applications. It is not supported for TimesTen Client or JDBC applications.

See also

ttRepDeactivate
ttRepPolicySet
ttRepStop
ttRepSubscriberStateSet
ttRepSyncGet
ttRepSyncSet
ttRepTransmitSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepPolicyGet

Description

This procedure returns the replication restart policy used to determine when the TimesTen Replication Agent for the connected database should run. The policy can be always, manual, or norestart.

Required privilege

This procedure requires no privilege.

Syntax

ttRepPolicyGet()

Parameters

ttRepPolicyGet has no parameters.

Result set

ttRepPolicyGet returns the results:

Parameter

Type

Description

repPolicy

TT_VARCHAR (10)

The policy used to determine when the TimesTen Replication Agent for the database should run. Valid values are:
always - Specifies that the replication agent for the database is always running. This option immediately starts the TimesTen Replication Agent. When the TimesTen daemon restarts, TimesTen automatically restarts the Replication Agent.

manual - Specifies that you must manually start the Replication Agent using either the ttRepStart built-in procedure or the ttAdmin -repStart command. You must explicitly stop the Replication Agent using either the ttRepStop built-in procedure or the ttAdmin -repStop command.

norestart - Specifies that the replication agent for the database is not to be restarted after a failure.

Examples

To set the policy for TimesTen Replication Agent to always, use:

CALL ttRepPolicyGet();

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepPolicySet

Description

This procedure defines the replication restart policy used to determine when the TimesTen Replication Agent for the connected database should run. The policy can be either always, manual, or norestart.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepPolicySet('repPolicy')

Parameters

ttRepPolicySet has this parameter:

Parameter

Type

Description

repPolicy

TT_VARCHAR (10) NOT NULL

Specifies the policy used to determine when the TimesTen replication agent for the database should run. Valid values are:
always - Specifies that the replication agent for the database is always running. This option immediately starts the TimesTen replication agent. When the TimesTen daemon restarts, TimesTen automatically restarts the Replication Agent.

manual - Specifies that you must manually start the Replication Agent using either the ttRepStart built-in procedure or the ttAdmin -repStart command. You must explicitly stop the replication agent using either the ttRepStop built-in procedure or the ttAdmin -repStop command.

norestart - Specifies that the replication agent for the database is not to be restarted after a failure.

Result set

ttRepPolicySet returns no results.

Examples

To set the policy for TimesTen replication agent to always, use the following.

CALL ttRepPolicySet('always');

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicyGet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepQueryThresholdGet

Description

This procedure returns the number of seconds that was most recently specified as the query threshold for the replication agent. The number of seconds returned may not be the same as the query threshold in effect. Setting a new value for the query threshold takes effect the next time the replication agent is started.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepQueryThresholdGet()

Parameters

ttRepQueryThresholdGet has no parameters.

Result set

ttRepQueryThresholdGet returns the result:

Column

Type

Description

repQueryThreshold

TT_INTEGER

The number of seconds that a replication query executes before returning an error.

Examples

To get the replication query threshold value, use:

CALL ttRepQueryThresholdGet;
< 4 >
1 row found.

See also

ttRepDeactivate
ttReplicationStatus
ttRepPolicyGet
ttRepQueryThresholdSet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
ttRepTransmitSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepQueryThresholdSet

Description

This procedure specifies the number of seconds that a query can be executed by the replication agent before TimesTen writes a warning to the support log and throws an SNMP trap. The specified value takes effect the next time the replication agent is started. The query threshold for the replication agent applies to SQL execution on detail tables of materialized views, ON DELETE CASCADE operations and some internal operations that execute SQL statements.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepQueryThresholdSet(seconds);

Parameters

ttRepQueryThresholdSet has the parameter:

Parameter

Type

Description

seconds

TT_INTEGER NOT NULL

Number of seconds a SQL statement can be executed by the replication agent before TimesTen writes a warning to the support log and throws an SNMP trap. The value must be greater than or equal to 0. Default is 0 and indicates that Timesten does not write any warnings.

Result set

ttRepQueryThresholdSet returns no results.

Examples

To set the replication query threshold value to four seconds, use:

CALL ttRepQueryThresholdSet(4);

See also

ttRepDeactivate
ttReplicationStatus
ttRepPolicyGet
ttRepQueryThresholdGet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
ttRepTransmitSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepStart

Description

This procedure starts the TimesTen replication agent for the connected database.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttRepStart()

Parameters

ttRepStart has no parameters.

Result set

ttRepStart returns no results.

Examples

To start the replication agent, use:

CALL ttRepStart();

Notes

The replication agent does not start if the database does not participate in any replication scheme.

When using this procedure, no application, including the application making the call, can be holding a connection that specifies database-level locking (LockLevel=1).

See also

ttRepDeactivate
ttRepTransmitGet
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncSet
ttRepSyncGet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepStateGet

Description

This procedure returns the current replication state of a database in an active standby pair.

Required privilege

This procedure requires no privilege.

Syntax

ttRepStateGet()

Parameters

ttRepStateGet has no parameters.

Result set

ttRepStateGet returns the result:

Column

Type

Description

state

TT_VARCHAR (20) NOT NULL

The current replication state of the database. One of:
ACTIVE - The database is currently the active master database. Applications may update its replicated tables.

STANDBY - The database is the standby master database. Applications may only update its non-replicated tables.

FAILED - The database is a failed master database. No updates are replicated to it.

IDLE - The database has not yet been assigned its role in the active standby pair. It cannot be updated by applications or replication. Every store comes up in the IDLE state.

RECOVERING - The store is in the process of synchronizing updates with the active store after a failure.

gridState

TT_VARCHAR (20) NOT NULL

The current grid state of the database. One of:
NO GRID - The node is not attached.

AVAILABLE - The node is attached and the role of the node is consistent with the replication store state, either active or standby. Operations that could cause ownership change can be performed. These operations include AGING, DELETE, INSERT, LOAD, SELECT, and UNLOAD.

IN TRANSITION - The node is attached and is in transition to active state from standby state. This state can occur during the failover of an active standby state. The replication store is active but not available for operations that can change ownership. Operations that can change ownership are disallowed.

UNAVAILABLE - The node is attached but could not be switched to active grid state during the last failover due to an error. Replication store state is already in active state, but operations that can change ownership are disallowed. The user must fix the error condition and explicitly execute the ttGridAttach procedure to bring the node to active state.

Examples

To determine the replication and the grid state of the active standby pair, use:

Call ttRepStateGet();
<STANDBY, NO GRID>

Call ttRepStateGet();
<ACTIVE, NO GRID>

Call ttRepStateGet();
<ACTIVE, AVAILABLE>

Call ttRepStateGet();
<ACTIVE, UNAVAILABLE>

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStateSave
ttRepStateSet
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepStateSave

Description

This procedure saves the state of a remote peer database in an active standby pair to the currently connected database. Currently, may only be used to indicate to the active database that the standby database, storeName on hostName, has failed, and that all updates on the active database should be replicated directly to the read-only subscribers.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepStateSave('state', 'storeName', 'hostName')

Parameters

ttRepStateSave has these parameters:

Parameter

Type

Description

state

TT_VARCHAR (20) NOT NULL

The replication state of the indicated database. May only be specified as FAILED in this release. Recording that a standby database has failed indicates that all replicated updates are to be sent directly from the active database to the read-only subscribers.

storeName

TT_VARCHAR (200) NOT NULL

Name of the database for which the state is indicated.

hostName

TT_VARCHAR (200)

Name of the host where the database resides.

Result set

ttRepStateSave returns no results.

Examples

To indicate to the active database that the standby database standby on host backup1 has failed, use:

ttRepStateSave('FAILED', 'standby', 'backup1');

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStateGet
ttRepStateSet
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepStateSet

Description

This procedure sets the replication state of a database in an active standby pair replication scheme. Currently, ttRepStateSet may only be used to set the state of a database to ACTIVE, indicating that it is to take the active role in an active standby pair. ttRepStateSet may only be executed in the following situations:

- A database has had a CREATE ACTIVE STANDBY PAIR command executed and no failures have occurred since.

- A database is currently in the STANDBY state, and the other database in the active standby pair has had its state changed from ACTIVE to IDLE using the ttRepDeactivate procedure.

- A database has just recovered from the local transaction log and was in the ACTIVE state before it went down.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepStateSet('state')

Parameters

ttRepStateSet has the parameter:

Parameter

Type

Description

state

TT_VARCHAR (20) NOT NULL

The replication state of the database. Must be ACTIVE, in this release. Setting a store to ACTIVE designates it as the active database in an active standby pair.

Result set

ttRepStateSet returns no results.

Examples

To set the replication state of the database to ACTIVE, use:

CALL ttRepStateSet('ACTIVE');

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStateGet
ttRepStateSave
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepStop

Description

This procedure stops the TimesTen replication agent for the connected database.

Required privilege

This procedure requires the CACHE_MANAGER privilege.

Syntax

ttRepStop()

Parameters

ttRepStop has no parameters.

Result set

ttRepStop returns no results.

Examples

To stop the replication agent, use:

CALL ttRepStop();

Note

When using this procedure, no application, including the application making the call, can be holding a connection that specifies database-level locking (LockLevel=1).

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStart
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepSubscriberStateSet

Description

This procedure changes a replicating subscriber's state with respect to the executing master store.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepSubscriberStateSet('replicationName', 'replicationOwner',
'subscriberStoreName', 'subscriberHostName', newStateCode)

Parameters

ttRepSubscriberStateSet has these parameters:

Parameter

Type

Description

replicationName

TT_CHAR (30)

The name of the replication scheme on which to operate. May be NULL to indicate all replication schemes.

replicationOwner

TT_CHAR (30)

The owner of the replication scheme. May be NULL to indicate all replication scheme owners.

subscriberStoreName

TT_VARCHAR (200)

The name of the subscribing database whose state is to be set. May be NULL to indicate all stores on host subscriberHostName.

subscriberHostName

TT_VARCHAR (200)

The subscriber's host. May be NULL to indicate all hosts of subscribing peers.

newStateCode

TT_INTEGER

An integer code representing the specified subscriber's new state:
0/NULL - Started.

1 - Paused.

2 - Stopped.

All other state codes are disallowed. (This procedure cannot set a subscriber state to "failed.")

Result set

ttRepSubscriberStateSet returns no results.

Examples

For the replication scheme named REPL.REPSCHEME, the following directs the master database to set the state of the subscriber database (SUBSCRIBERDS ON SYSTEM1) to Stop (2):

CALL ttRepSubscriberStateSet('REPSCHEME', 'REPL', 'SUBSCRIBERDS','SYSTEM1', 2);

To direct the master database to set the state of all its subscribers to Pause (1), use:

CALL ttRepSubscriberStateSet( , , , , 1 );

Leaving a parameter empty is equivalent to using NULL.

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStart
ttRepStop
ttRepSubscriberWait
ttRepTransmitGet
ttRepTransmitSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepSubscriberWait

Description

This procedure causes the caller to wait until all transactions that committed before the call have been transmitted to the subscriber subscriberStoreName. It also waits until the subscriber has acknowledged that the updates have been durably committed at the subscriber database.

Call this procedure in a separate transaction, when no other transaction is pending on the active database. This call returns an error if any transactions on the active database are open.

If you set the waitTime parameter to -1 and the subscriberStoreName parameter to NULL, the ttRepSubscriberWait procedure does not return until all updates committed up until the time of the procedure call have been transmitted to all subscribers, and all subscribers have acknowledged that the updates have been durably committed.

The ttRepSubscriberWait procedure should not be used when an urgent response is required. Instead, you should use the return receipt service.

Note:
If this procedure is called after all write transaction activity is quiesced at a store (there are no active transactions and no transactions have started), it may take 60 seconds or longer before the subscriber sends the acknowledgment that all updates have been durably committed at the subscriber.

Required privilege

This procedure requires no privilege.

Syntax

ttRepSubscriberWait('replicationName', 'replicationOwner', 'subscriberStoreName',
'subscriberHostName', waitTime)

Parameters

ttRepSubscriberWait has these parameters:

Parameter

Type

Description

replicationName

TT_CHAR (30)

The name of the replication scheme on which to operate. May be NULL to indicate all replication schemes.

replicationOwner

TT_CHAR (30)

The owner of the replication scheme. May be NULL to indicate all replication scheme owners.

subscriberStoreName

TT_VARCHAR (200)

The name of the subscribing database whose state is to be set. May be NULL to indicate all stores on host subscriberHostName.

subscriberHostName

TT_VARCHAR(200)

The subscriber's host. May be NULL to indicate all hosts of subscribing peers.

waitTime

TT_INTEGER NOT NULL

Number of seconds to wait for the specified subscriber(s). A value of -1 indicates to wait forever. This parameter is required and may not be NULL.

Result Set

ttRepSubscriberWait returns the result set:

Column

Type

Description

timeOut

BINARY(1)

0x00 - The wait succeeded within the allotted waitTime; the specified subscribers are up to date at the time this procedure was called. TimesTen returns 0x01 if not enough time has been granted.

Example

If there is one defined replication scheme REPOWNER.REPSCHEME, to direct the transmitting database to wait ten minutes for subscriber REP2 on SERVER2 to catch up, use:

CALL ttRepSubscriberWait('REPSCHEME','REPOWNER', 'REP2', 'SERVER2', 600);

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSyncGet
ttRepSyncSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepSyncGet

Description

This procedure returns static attributes associated with the caller's use of the replication- based return service. This procedure operates with either the RETURN RECEIPT or RETURN TWOSAFE service.

Required privilege

This procedure requires no privilege.

Syntax

ttRepSyncGet()

Parameters

ttRepSyncGet has no parameters.

Result set

ttRepSyncGet returns the result set:

Column

Type

Description

requestReturn

BINARY(1)

0 (default) - Don't wait for return notification configured with the RETURN RECEIPT BY REQUEST or RETURN TWOSAFE BY REQUEST option.
1 - Wait for the return notification. Commit resets this attribute to its default value of 0 ("off").

returnWait

TT_INTEGER

Specifies the number of seconds to wait for return service acknowledgment. The default value is 10 seconds. A value of `0' means that there is no wait time.This attribute persists across transaction boundaries and applies to all RETURN services independent of the BY REQUEST option.

localAction

TT_INTEGER

The current LOCAL ACTION configuration for RETURN services.
1 (default) - NO ACTION. When a COMMIT times out, it returns the application unblocked, leaving the transaction in the same state it was when the COMMIT began. The application may only reissue the COMMIT.

2 - COMMIT. When the COMMIT times out, the transaction is committed locally. No more operations are possible on this transaction, and the replicated databases diverge.This attribute persists across transactions and for the life of the connection.

Example

To retrieve the caller's requestReturn value, use:

SQLCHAR requestReturn[1];
SQLINTEGER    len;
rc = SQLExecDirect   ( hstmt
, (SQLCHAR *) "{CALL ttRepSyncGet( NULL )}"
, SQL_NTS )
rc = SQLBindCol     ( hstmt
, /* ColumnNumber */      1
, /* TargetType */      SQL_C_BINARY )
, /* TargetValuePtr */     requestReturn
,./* BufferLength */      sizeof requestReturn
, /* StrLen_ */         &len );
rc = SQLFetch( hstmt );
if ( requestReturn[0] ) {
...
}

Notes

When called within a standalone transaction, ttRepSyncGet always returns the default value for requestReturn.

ttRepSyncGet may be called at any point within a transaction in which it is used to request the BY REQUEST return service for that transaction.

If you call ttRepSyncGet in a transaction that does not, in fact, update any RETURN RECEIPT BY REQUEST or RETURN TWOSAFE BY REQUEST replication elements, the call has no external effect.

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepSyncSet

Description

This procedure sets static attributes associated with the caller's use of the replication-based return service. This procedure operates with either the RETURN RECEIPT or RETURN TWOSAFE service.

Required privilege

This procedure requires no privilege.

Syntax

ttRepSyncSet(requestReturn, returnWait, localAction)

Parameters

ttRepSyncSet has these optional parameters:

Parameter

Type

Description

requestReturn

BINARY(1)

0x00 - Turn off the return service for the current transaction.
0x01 - Turn on return services for the current transaction. Committing the transaction resets this attribute to its default value of 0 ("off").

You can use this parameter to turn on or turn off return services only when the replication subscribers have been configured with RETURN RECEIPT BY REQUEST or RETURN TWOSAFE BY REQUEST.

returnWait

TT_INTEGER

Specifies the number of seconds to wait for return service acknowledgment. The default value is 10 seconds. A value of '0' means there is no wait time.
This timeout value overrides the value set by the RETURN WAIT TIME attribute in the CREATE REPLICATION or ALTER REPLICATION statement.

The timeout set by this parameter persists across transaction boundaries and applies to all return services independent of the BY REQUEST option.

localAction

TT_INTEGER

Action to be performed in the event the subscriber is unable to acknowledge commit of the transaction within the timeout period specified by returnWait. This parameter can only be used for return twosafe transactions. Set to NULL when using the RETURN service.
1 (default) - NO ACTION. When a COMMIT times out, it returns the application unblocked, leaving the transaction in the same state it was when the COMMIT began,. The application may only reissue the COMMIT.

2 - COMMIT. When the COMMIT times out, the transaction is committed locally. No more operations are possible on this transaction, and the replicated databases diverge.This attribute persists across transactions and for the life of the connection.

Result set

ttRepSyncSet has no result set.

Examples

To enable the return receipt service in the current transaction for all the replication elements configured with RETURN RECEIPT BY REQUEST or RETURN TWOSAFE BY REQUEST, use:

rc = SQLExecDirect ( hstmt,
(SQLCHAR *)"{CALL ttRepSyncSet( 0x01 )}",
SQL_NTS )

Note

The call to enable the return receipt service must be part of the transaction (AutoCommit must be off).

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepSyncSubscriberStatus

Description

This procedure queries a subscriber database in a replication scheme configured with a return service and a RETURN DISABLE failure policy to determine whether return service blocking for the subscriber has been disabled by the failure policy.

The ttRepSyncSubscriberStatus procedure returns the failure status of the subscriber database with the specified name on the specified host. You can specify only the storeName. However, an error is generated if the replication scheme contains multiple subscribers with the same name on different hosts.

Required privilege

This procedure requires no privilege.

Syntax

ttRepSyncSubscriberStatus('storeName', 'hostName')

Parameters

ttRepSyncSubscriberStatus has these parameters:

Parameter

Type

Description

subscriber

TT_VARCHAR (200) NOT NULL

The name of the subscribing database to be queried.

hostName

TT_VARCHAR (200)

The host name of one or more stores that are configured to receive updates from the executing store; if NULL, then receiving stores are identified by receiver alone. If both receiver and hostname are NULL, then all receiving stores are selected.

Result set

ttRepSyncSubscriberStatus returns:

Column

Type

Description

disabled

TT_INTEGER

Value is either:
'1' if the return service has been disabled on the subscriber database.

'0' if the return service is still enabled on the subscriber database.

Note

If the replication scheme specifies DISABLE RETURN ALL, then you must use ttRepSyncSubscriberStatus to query the status of each individual subscriber in the replication scheme.

ttRepTransmitGet

Description

This procedure returns the status of transmission of updates to subscribers for the current transaction. The corresponding ttRepSyncSet built-in procedure allows you to stop transmission of updates to subscribers for the length of a transaction.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepTransmitGet()

Parameters

ttRepTransmitGet has no parameters.

Result set

ttRepTransmitGet returns the result:

Column

Type

Description

transmit

TT_INTEGER

0 - Updates are not being transmitted to any subscribers for the remainder of the transaction on the connection.
1 (default) - Updates are being transmitted to subscribers on the connection.

Example

To return the transmit status on the active database in an active standby pair, use:

CALL ttRepTransmitGet();

See also

ttRepDeactivate
ttReplicationStatus
ttRepPolicySet
ttRepStateSave
ttRepStateSet
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepTransmitSet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepTransmitSet

Description

This procedure stops subsequent updates on the connection it is executed in from being replicated to any subscriber.

This procedure should be used with care since it could easily lead to transactional inconsistency of remote stores if partial transactions are replicated. If updates are disallowed from getting replicated, the subscriber stores diverge from the master store.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttRepTransmitSet(transmit)

Parameters

ttRepTransmitSet has the parameter:

Parameter

Type

Description

transmit

TT_INTEGER NOT NULL

When set to 1 updates are transmitted to subscribers on the connection after the built-in is executed to replicate (default).
When set to 0 updates are not transmitted to any subscribers for the remainder of the transaction in which this call was issued and on the connection that issued it.

Result set

ttRepTransmitSet returns no results.

Example

To activate the active database in an active standby pair, use:

CALL ttRepTransmitSet(1);

To deactivate the active database in an active standby pair, use:

CALL ttRepTransmitSet(0);

See also

ttRepDeactivate
ttReplicationStatus
ttRepPolicySet
ttRepStateSave
ttRepStateSet
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepTransmitGet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepXactStatus

Description

This procedure checks on the status of a RETURN RECEIPT or RETURN TWOSAFE replication transaction. Using the built-in procedure ttRepXactTokenGet, you can get the token of a RETURN RECEIPT or RETURN TWOSAFE transaction. This is then passed as an input parameter to this built-in procedure. Only a token received from ttRepXactTokenGet may be used. The procedure returns a list of rows each of which have three parameters, a subscriber name, the replication status with respect to the subscriber and an error string that is only returned if a RETURN TWOSAFE replication transaction began but did not complete commit processing.

Note:
The error parameter is only returned for RETURN TWOSAFE transactions.

Required privilege

This procedure requires no privilege.

Syntax

ttRepXactStatus(token)

Parameters

ttRepXactStatus has the parameter:

Parameter

Type

Description

xactID

VARBINARY (10000)

If no parameter is specified, status is returned for one of the following:- If called in a transaction that has begun, but not completed, commit processing, it returns the status of the transaction.- If called at any other time, it returns status for the most recently committed transaction on the connection that was in RETURN RECEIPT or RETURN TWOSAFE mode.

Result set

ttRepXactStatus returns the result set:

Column

Type

Description

subscriberName

TT_CHAR (61)

The name of the database that subscribes to tables updated in the transaction. The name returns as: store_name@host_name.

state

TT_CHAR (2)

The state of the transaction with respect to the subscribing database. The return values are one of the following:
'NS' - Transaction not sent to the subscriber.

'RC' - Transaction received by the subscriber agent.

'CT' - Transaction applied at the subscriber store. (Does not convey whether the transaction ran into an error when being applied.)

'AP' - Transaction has been durably applied on the subscriber.

errorString

TT_VARCHAR (2000)

Error string retuned by the subscriber agent describing the error it encountered when applying the twosafe transaction. If no error is encountered, this parameter is NULL. Non-null values are only returned when this procedure is called inside a twosafe replication transaction that has begun, but has not yet completed, processing a commit.

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
ttRepXactTokenGet
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttRepXactTokenGet

Description

This procedure returns a token for RETURN RECEIPT or RETURN TWOSAFE replication transactions. Depending on the input parameter, type, it returns either:

- A token to the most recently committed RETURN RECEIPT transaction on the connection handle in which it is invoked.

- A token to the most recent transaction on the connection handle in which it is invoked that has begun commit processing on a transaction in RETURN TWOSAFE mode.

This procedure can be executed in any subsequent transaction or in the same transaction after commit processing has begun for a transaction in RETURN TWOSAFE replication.

Required privilege

This procedure requires no privilege.

Syntax

ttRepXactTokenGet('type')

Parameters

ttRepXactTokenGet has these parameters:

Parameter

Type

Description

type

TT_CHAR (2) NOT NULL

The type of transaction desired:
'RR' - Return receipt.

'R2' - Return twosafe.

Result set

ttRepXactTokenGet returns the result set:

Column

Type

Description

token

VARBINARY (10000)

A varbinary token used to represent the transaction desired.

See also

ttRepDeactivate
ttRepTransmitSet
ttReplicationStatus
ttRepPolicySet
ttRepStart
ttRepStop
ttRepSubscriberStateSet
ttRepSubscriberWait
ttRepSyncGet
ttRepSyncSet
ttRepXactStatus
"ttRepDuplicateEx" in Oracle TimesTen In-Memory Database C Developer's Guide

ttSetUserColumnID

Description

This procedure explicitly sets the value for the user-specified column ID. Updates presented to the application by the Transaction Log API may contain information about the columns of a table. This column information contains a system-specified column number and a user-specified column identifier. The user-specified column ID has the value 0 until set explicitly by this call.

The system assigns an ID to each column during a CREATE or ALTER TABLE operation. Setting a user-assigned value for the column ID allows you to have a unique set of column numbers across the entire database or a specific column numbering system for a given table.

Required privilege

This procedure requires the XLA privilege.

Syntax

ttSetUserColumnID('tblName', 'colName', repID)

Parameters

ttSetUserColumnID has these parameters:

Parameter

Type

Description

tblName

TT_CHAR(61) NOT NULL

Table name.
Using a synonym to specify a table name is not supported.

colName

TT_CHAR(30) NOT NULL

Column name.

repID

TT_INTEGER NOT NULL

Integer identifier.

Result set

ttSetUserColumnID returns no results.

Example

CALL ttSetUserColumnID('APP.SESSION', 'SESSIONID', 15);

See also

ttSetUserTableID
Oracle TimesTen In-Memory Database Replication Guide

ttSetUserTableID

Description

This procedure explicitly sets the value of the user table ID. The table that each row is associated with is expressed with two codes: an application-supplied code called the user table ID and a system-provided code called the system table ID. Updates are presented to the application by the Transaction Log API in the form of complete rows. The user table ID has the value zero until explicitly set with the ttSetUserTableID procedure.

Required privilege

This procedure requires the XLA privilege.

Syntax

ttSetUserTableID('tblName', repID)

Parameters

ttSetUserTableID has these parameters:

Parameter

Type

Description

tblName

TT_CHAR (61) NOT NULL

Table name.
Using a synonym to specify a table name is not supported.

repID

BINARY(8) NOT NULL

Integer identifier.

Result set

ttSetUserTableID returns no results.

Example

CALL ttSetUserTableID('APP.SESSION', 0x123456);

See also

ttSetUserColumnID
Oracle TimesTen In-Memory Database Replication Guide

ttSize

Description

This procedure estimates the size of a table or view. It returns a single row with a single DOUBLE column with the estimated number of bytes for the table. The table can be specified as either a table name or a fully qualified table name. A non-NULL nrows parameter causes the table size to be estimated assuming the statistics of the current table scaled up to the specified number of rows. If the nrows parameter is NULL, the size of the table is estimated with the current number of rows.

The current contents of the table are scanned to determine the average size of each VARBINARY and VARCHAR column. If the table is empty, the average size of each VARBINARY and VARCHAR column is estimated to be one-half its declared maximum size. The estimates computed by ttSize include storage for the table itself, VARBINARY and VARCHAR columns and all declared indexes on the table.

The table is scanned when this built-in procedure is called. The scan of the table can be avoided by specifying a non-NULL frac value, which should be between 0 and 1. This value is used to estimate the average size of varying-length columns. The maximum size of each varying-length column is multiplied by the frac value to compute the estimated average size of VARBINARY or VARCHAR columns. If the frac parameter is not given, the existing rows in the table are scanned and the average length of the varying-length columns in the existing rows is used. If frac is omitted and the table has no rows in it, then frac is assumed to have the value 0.5.

Required privilege

This procedure requires the SELECT privilege on the specified table.

Syntax

ttSize('tblName', nRows, frac)

Parameters

ttSize has these parameters:

Parameter

Type

Description

tblName

TT_CHAR(61) NOT NULL

Name of an application table. Can include table owner. This parameter is required.
Using a synonym to specify a table name is not supported.

nRows

TT_INTEGER

Number of rows to estimate in a table. This parameter is optional.

frac

BINARY_DOUBLE

Estimated average fraction of VARBINARY or VARCHAR column sizes. This parameter is optional.

Result set

ttSize returns the following result set.

Column

Type

Description

size

BINARY_DOUBLE NOT NULL

Estimated size of the table, in bytes.

Examples

CALL ttSize('ACCTS', 1000000, NULL);

CALL ttSize('ACCTS', 30000, 0.8);

CALL ttSize('SALES.FORECAST', NULL, NULL);

When using ttSize, you must first execute the command and then fetch the results. For example:

ODBC

double size;
SQLLEN len;

rc = SQLExecDirect(hstmt, "call ttSize('SalesData', 250000,
0.75)", SQL_NTS);
rc = SQLBindColumn(hstmt, 1, SQL_C_DOUBLE, &size, sizeof double,
&len);
rc = SQLFetch(hstmt);
rc = SQLFreeStmt(hstmt, SQL_CLOSE);

JDBC

. . . . . .
String URL="jdbc:timesten:MyDataStore";
Connection con;
double tblSize=0;
. . . . . .
con = DriverManager.getConnection(URL);
CallableStatement cStmt = con.prepareCall("
{CALL ttSize('SalesData', 250000, 0.75) }");
if( cStmt.execute() )
{
rs=cStmt.getResultSet();
if (rs.next()) {
tblSize=rs.getDouble(1);
}
rs.close();
}
cStmt.close();
con.close();

. . . . . .

Note

The ttSize procedure allows you to estimate how large a table will be with its full population of rows based on a small sample. For the best results, we recommend populating the table with at least 1,000 typical rows.

See also

ttComputeTabSizes

ttSQLCmdCacheInfo

Description

This procedure returns all compiled SQL statements in the TimesTen SQL command cache.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttSQLCmdCacheInfo()

Parameters

ttSQLCmdCacheInfo has the optional parameter:

Parameter

Type

Description

sqlCommandID

TT_INTEGERfor 32-bit systems
TT_BIGINT for 64-bit systems

The unique identifier of a SQL command in the TimesTen command cache. If no value is supplied displays information about all current commands in the TimesTen cache.

Result set

ttSQLCmdCacheInfo returns the result set:

Parameter

Type

Description

sqlCommandID

TT_INTEGER NOT NULL for 32-bit systems
TT_BIGINT NOT NULL for 64-bit systems

The unique identifier of a command in the TimesTen command cache.

privateCommandConnectionID

TT_INTEGER

The unique ID of a private connection. If not a private connection, the value is 2048.

executions

TT_BIGINT
NOT NULL

A counter for the number of executions that took place on this command since it was brought into the command cache.

prepares

TT_BIGINT NOT NULL

A counter for the number of user prepares that result in a hit on the command cache.

reprepares

TT_BIGINT NOT NULL

A counter for the number of reprepares or invalidations of this command.

freeable

TT_TINYINT NOT NULL

Indicates whether this command can be garbage collected by the subdaemon.
1 - Indicates freeable.

0 - Indicates non-freeable.

size

TT_INTEGER NOT NULL

The total space (bytes) allocated for this command in the command cache.

owner

TT_CHAR(31) NOT NULL

The identifier of the user who created this command.

queryText

TT_VARCHAR (409600) NOT NULL

The full SQL text for the current command.

Examples

To display command info for all the current valid commands, use

Command> CALL ttSQLCmdCacheInfo;
< 528079360, 2048, 0, 1, 0, 1, 2168, TTUSER , select * from t7 where x7 is
not null or exists (select 1 from t2,t3 where not 'tuf' like 'abc') >
< 527609108, 2048, 0, 1, 0, 1, 2960, TTUSER , select * from t1 where x1 =
(select x2 from t2 where z2 in (1,3) and y1=y2) order by 1, 2, 3 >
< 528054656, 2048, 0, 1, 0, 1, 1216, TTUSER , create table t2(x2 int,y2 int,
z2 int) >
< 528066648, 2048, 0, 1, 0, 1, 1176, TTUSER , insert into t2 select * from t1 >
< 528013192, 2048, 0, 1, 0, 1, 1848, TTUSER , select * from t1 where exists
(select * from t2 where x1=x2) or y1=1 >
< 527582620, 2048, 0, 1, 0, 1, 1240, TTUSER , insert into t2 select * from t1 >
< 527614292, 2048, 0, 1, 0, 1, 2248, TTUSER , select * from t1 where exists
(select x2 from t2 where x1=x2) order by 1, 2, 3 >
< 528061248, 2048, 0, 1, 0, 1, 696, TTUSER , create index i1 on t3(y3) >
< 528070368, 2048, 0, 1, 0, 1, 824, TTUSER , call ttOptSetOrder('t3 t4 t2 t1') >
< 528018856, 2048, 0, 1, 0, 1, 984, TTUSER , insert into t2 select * from t1 >
< 527606460, 2048, 0, 1, 0, 1, 2624, TTUSER , select * from t1 where x1 =
(select x2 from t2 where y1=y2) order by 1, 2, 3 >
< 528123000, 2048, 0, 1, 0, 1, 3616, TTUSER , select * from t1 where x1 = 1 or
x1 = (select x2 from t2,t3 where z2=t3.x3) >
< 528074624, 2048, 0, 1, 0, 1, 856, TTUSER , call ttOptSetOrder('t4 t2 t3 t1') >
< 527973892, 2048, 0, 1, 0, 1, 2872, TTUSER , select * from t1 where x1 in
(select x2 from t2) or x1 in (select x3 from t3) order by 1, 2, 3 >
< 527953876, 2048, 0, 1, 0, 1, 3000, TTUSER , select * from t1 where x1 =
(select x2 from t2) order by 1, 2, 3 >
< 527603900, 2048, 0, 1, 0, 1, 2440, TTUSER , select * from t1 where x1 in
(select x2 from t2 where y1=y2) order by 1, 2, 3 >
< 528093308, 2048, 0, 1, 0, 1, 3608, TTUSER , select * from t1 where x1 = 1 or
x1 = (select x2 from t2,t3 where z2=t3.x3 and t3.z3=1) >
< 528060608, 2048, 0, 1, 0, 1, 696, TTUSER , create index i1 on t2 (y2) >
…..

To display command info for the SqlCmdId 527973892, use

Command> CALL ttSQLCmdCacheInfo(527973892);
< 527973892, 2048, 0, 1, 0, 1, 2872, TTUSER,
select * from t1 where x1 in (select x2 from t2) or
x1 in (select x3 from t3) order by 1, 2, 3 >
1 row found.

ttSQLCmdCacheInfoGet

Description

This procedure returns command statistics update information. This procedure can be useful for certain operations, such as CREATE INDEX or DROP INDEX and other DDL operations that alter objects.

Required privilege

This procedure requires no privilege.

Syntax

ttSQLCmdCacheInfoGet()

Parameters

ttSQLCmdCacheInfoGet has no parameters.

Result set

ttSQLCmdCacheInfoGet returns the result set:

Parameter

Type

Description

cmdCount

TT_INTEGER NOT NULL

Number of commands in the cache.

freeableCount

TT_INTEGER NOT NULL

Count of number of freeable commands that can be garbage collected by the subdaemon at that moment. This number is obtained by examining the command information.

size

TT_BIGINT NOT NULL

The current total space allocated to store all the cached commands.

Examples

To generate a list of all TimesTen instance users, use:

Command> CALL ttSQLCmdCacheInfoGet;
< 5,4,12316 >
1 row found

ttSQLCmdQueryPlan

Description

This procedure returns all detailed run-time query plans for SQL statements in the TimesTen SQL command cache. If no argument is supplied, this procedure displays the query plan for all valid commands in the TimesTen cache. For invalid commands, an error is returned that displays the text of the query and the syntax problems.

Required privilege

This procedure requires the ADMIN privilege.

Syntax

ttSQLCmdQueryPlan(commandID)

Parameters

ttSQLCmdQueryPlan has the optional parameter:

Parameter

Type

Description

sqlCmdID

TT_INTEGER for 32-bit systems
TT_BIGINT for 64-bit systems

The unique identifier of a SQL command in the TimesTen command cache. If no value is supplied displays the query plan for all valid commands in the TimesTen cache.

Result set

ttSQLCmdQueryPlan returns the result set:

Parameter

Type

Description

sqlCmdID

TT_INTEGER NOT NULL for 32-bit systems
TT_BIGINT NOT NULL for 64-bit systems

The unique identifier of a command in the TimesTen command cache.

queryText

TT_VARCHAR(1024)

The first 1024 characters of the SQL text for the current command.

step

TT_INTEGER

The step number of current operation in this run-time query plan.

level

TT_INTEGER

The level number of current operation in this run-time query plan.

operation

TT_CHAR(31)

The operation name of the current step in this run-time query plan.

tblName

TT_CHAR(31)

Name of the table used in this step, if any.
Using a synonym to specify a table name is not supported.

tblOwnerName

TT_CHAR(31)

Name of the owner of the table used in this step, if any.

ixName

TT_CHAR(31)

Name of the index used in this step, if any.

indexedPred

TTVARCHAR(1024)

In this step, if an index is used, the indexed predicate is printed if available. Not all expressions can be printed out and the output may be fragmented and truncated. "..." represents the unfinished portion of the expression.

nonIndexedPred

TT_VARCHAR(1024)

In this step, if a non-indexed predicate is used, the non-indexed predicate is printed if available. Not all expressions can be printed out and the output may be fragmented and truncated. "..." represents the unfinished portion of the expression.

Examples

To display the query plan for SQLCmdID 528078576:

Command> call ttSqlCmdQueryPlan(528078576);
< 528078576, select * from t1 where 1=2 or (x1 in (select x2 from t2, t5 where
y2 in (select y3 from t3)) and y1 in (select x4 from t4)), <NULL>, <NULL>, <NULL>,
<NULL>, <NULL>, <NULL>, <NULL>, <NULL> >
< 528078576, <NULL>, 0, 4, RowLkSerialScan , T1 , TTUSER , , , >
< 528078576, <NULL>, 1, 7, RowLkRangeScan , T2 , TTUSER , I2 , , >
< 528078576, <NULL>, 2, 7, RowLkRangeScan , T5 , TTUSER , I2 , , >
< 528078576, <NULL>, 3, 6, NestedLoop , , , , , >
< 528078576, <NULL>, 4, 6, RowLkRangeScan , T3 , TTUSER , I1 , ( (Y3=Y2; ) ) , >
< 528078576, <NULL>, 5, 5, NestedLoop , , , , , >
< 528078576, <NULL>, 6, 4, Filter , , , , , X1 = X2; >
< 528078576, <NULL>, 7, 3, NestedLoop(Left OuterJoin) , , , , , >
< 528078576, <NULL>, 8, 2, Filter , , , , , >
< 528078576, <NULL>, 9, 2, RowLkRangeScan , T4 , TTUSER , I2 , , Y1 = X4; >
< 528078576, <NULL>, 10, 1, NestedLoop(Left OuterJoin) , , , , , >
< 528078576, <NULL>, 11, 0, Filter , , , , , >
13 rows found.

To display query plans for all valid queries, omit the argument for ttSqlCmdQueryPlan:

< 528079360, select * from t7 where x7 is not null or exists (select 1 from t2,t3
where not 'tuf' like 'abc'), <NULL>, <NULL>, <NULL>, <NULL>, <NULL>, <NULL>,
<NULL>, <NULL> >
< 528079360, <NULL>, 1, 3, RowLkRangeScan  , T2
, TTUSER  , I2 , , NOT(LIKE( tuf ,abc ,NULL )) >
< 528079360, <NULL>, 2, 3, RowLkRangeScan  , T3  , TTUSER  , I2  , , >
< 528079360, <NULL>, 3, 2, NestedLoop  ,  ,  ,  , , >
< 528079360, <NULL>, 4, 1, NestedLoop(Left OuterJoin) ,    ,    ,    , , >
< 528079360, <NULL>, 5, 0, Filter    ,    ,    ,    , , X7 >
< 527576540, call ttSqlCmdQueryPlan(527973892), <NULL>, <NULL>, <NULL>, <NULL>,
<NULL>, <NULL>, <NULL>, <NULL> >
< 527576540, <NULL>, 0, 0, Procedure Call  ,  ,  ,  , , >
< 528054656, create table t2(x2 int,y2 int, z2 int), <NULL>, <NULL>, <NULL>,
<NULL>, <NULL>, <NULL>, <NULL>, <NULL> >
< 528066648, insert into t2 select * from t1, <NULL>, <NULL>, <NULL>, <NULL>,
<NULL>, <NULL>, <NULL>, <NULL> >
< 528066648, <NULL>, 0, 0, Insert  , T2  , TTUSER  ,  , , >
< 528013192, select * from t1 where exists (select * from t2 where x1=x2) or y1=1,
<NULL>, <NULL>, <NULL>, <NULL>, <NULL>, <NULL>, <NULL>, <NULL> >
< 528061248, create index i1 on t3(y3), <NULL>, <NULL>, <NULL>, <NULL>, <NULL>,
<NULL>, <NULL>, <NULL> >
< 528070368, call ttOptSetOrder('t3 t4 t2 t1'), <NULL>, <NULL>, <NULL>, <NULL>,
<NULL>, <NULL>, <NULL>, <NULL> >
< 528070368, <NULL>, 0, 0, Procedure Call  ,  ,  ,  , , >
< 528018856, insert into t2 select * from t1, <NULL>, <NULL>, <NULL>, <NULL>,
<NULL>, <NULL>, <NULL>, <NULL> >
< 527573452, call ttsqlCmdCacheInfo(527973892), <NULL>, <NULL>, <NULL>, <NULL>,
<NULL>, <NULL>, <NULL>, <NULL> >
< 527573452, <NULL>, 0, 0, Procedure Call   ,    ,    ,    , , >
….. /* more rows here */

ttTableSchemaFromOraQueryGet

Description

This built-in procedure evaluates a SELECT query on an Oracle table and generates a CREATE TABLE SQL statement that you can choose to execute. The TimesTen CREATE TABLE statement matches the result set column names and types.

This procedure does not create the TimesTen table, it only returns a statement that identifies the table schema.

For more details and usage information, see "Loading Oracle data into a TimesTen table" in the Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

This procedure requires no privileges. The session user must have all required privileges to execute the query on the Oracle database.

Syntax

ttTableSchemaFromOraQueryGet(TblOwner, tblname, Query)

Parameters

ttTableSchemaFromOraQueryGet has the optional parameter:

Parameter

Type

Description

tblOwner

TT_CHAR (30)

TimesTen table owner.

tblName

TT_CHAR (30) NOT NULL

Table name for the CREATE TABLE statement.
The specified TimesTen table cannot be a system table, a synonym, a view, a materialized view or a detail table of a materialized view, a global temporary table, a cache group table or a table that contains compressed columns.

Query

TT_VARCHAR (409600) NOT NULL

An Oracle SELECT query to derive the table column definition.
Any expressions in the SELECT list should be provided with a column alias; otherwise, an implementation dependent column name is assumed and the expression is not evaluated.

Result set

ttTableSchemaFromOraQueryGet returns the result set:

Parameter

Type

Description

tableSchema

TT_VARCHAR (409600) NOT NULL

A CREATE TABLE statement that matches the result set of the Oracle SELECT query.

Examples

This example, returns the CREATE TABLE statement to create the TimesTen HR.EMPLOYEES table with all columns found in the Oracle HR.EMPLOYEES table.

Command> call ttTableSchemaFromOraQueryGet('hr','employees',
'SELECT * FROM hr.employees');
< CREATE TABLE "HR"."EMPLOYEES" (
"EMPLOYEE_ID" number(6,0) NOT NULL,
"FIRST_NAME" varchar2(20 byte),
"LAST_NAME" varchar2(25 byte) NOT NULL,
"EMAIL" varchar2(25 byte) NOT NULL,
"PHONE_NUMBER" varchar2(20 byte),
"HIRE_DATE" date NOT NULL,
"JOB_ID" varchar2(10 byte) NOT NULL,
"SALARY" number(8,2),
"COMMISSION_PCT" number(2,2),
"MANAGER_ID" number(6,0),
"DEPARTMENT_ID" number(4,0)
) >
1 row found.

Notes

The Oracle query cannot have any parameter bindings.

TimesTen returns an error if the query cannot be described on Oracle, for example, if there is a syntax error.

If an output column type does not have a matching type in TimesTen, TimesTen outputs a warning and the following line for the column definition: >>>>column_name column_type /* reason */

If the Oracle query outputs types not supported by TimesTen, you can add a CAST clause in the SELECT list to explicitly change the output to a TimesTen supported type. Column aliases can be specified for expressions in the SELECT list.

If the Oracle query has LOB output, it is mapped to a variable type.

ttVersion

Description

This procedure returns the five digits that make up the release number of the current TimesTen instance.

Required privilege

This procedure requires no privilege.

Syntax

ttVersion()

Parameters

ttVersion has no parameters.

Result set

ttVersion returns the result set:

Column

Type

Description

major

TT_INTEGER NOT NULL

The major release number. Indicates releases with major infrastructure and functionality changes.

minor

TT_INTEGER NOT NULL

The minor release number. Indicates a version with new functionality changes, but no infrastructure changes.

patch

TT_INTEGER NOT NULL

The patch release number. Indicates a release that contains all bug fixes since the previous maintenance release.

relDot4

TT_INTEGER NOT NULL

Indicates a release with minor bug fixes.

relDot5

TT_INTEGER NOT NULL

This digit in the release number is reserved for future use.

Example

CALL ttVersion( );
<11, 2, 2 , 1, 0>
1 row found.

In this case, the TimesTen release number is: 11.2.2.1.0.

ttWarnOnLowMemory

Description

This procedure allows applications to specify that operations executed on the current connection should return a warning if they allocate memory and find that memory is low. If the value is set, a warning is returned for any operation that does an allocation and finds total memory in use to be above the connection's threshold value as specified by the PermWarnThreshold and TempWarnThreshold connection attributes. See "Connection Attributes" for more information.

Required privilege

This procedure requires no privilege.

Syntax

ttWarnOnLowMemory(permanent, temporary)

Parameters

ttWarnOnLowMemory has these parameters:

Parameter

Type

Description

permanent

TT_INTEGER NOT NULL

1(enable) or 0 (disable) warnings for the permanent data partition.

temporary

TT_INTEGER NOT NULL

1 (enable) or 0 (disable) warnings for the temporary data partition.

Result set

ttWarnOnLowMemory returns no results.

Example

CALL ttWarnOnLowMemory(1, 0);

Enables low memory warnings for the permanent data partition only.

Note

By default, low memory warnings are not issued for either partition. Applications that want to receive these warnings must call this procedure. This procedure is connection specific, and so you must issue it for each connection upon which warnings are desired. Also, the current setting does not persist to subsequent connections.

ttXactIdGet

Description

This procedure returns transaction ID information for interpreting lock messages. The two result columns of ttXactIdGet are used in combination to uniquely identify a transaction in a database. Taken individually, the columns are not interesting. The result should only be used to correlate with other sources of transaction information. The numbers may not follow a strict pattern.

Required privilege

This procedure requires no privilege.

Syntax

ttXactIdGet()

Parameters

ttXactIdGet has no parameters.

Result set

ttXactIdGet returns the result set:

Column

Type

Description

xactID

TT_INTEGER

Connection ID.

counter

TT_BIGINT

An increasing number that is used to discriminate successive transactions of the same transaction ID.

Example

Command > automcommit 0;
Command > call ttXactIdGet;
<2,11>
1 row found
Command > commit;
Command > call ttXactIdGet
<3, 12>
1 row found

Note

The output correlates to the values printed in lock error messages and ttXactAdmin lock information output.

See also

ttXactAdmin
"ttXactIdRollback" in the Oracle TimesTen In-Memory Database C Developer's Guide

ttXlaBookmarkCreate

Description

This procedure creates the specified bookmark.

Required privilege

This procedure requires the XLA privilege.

Syntax

ttXlaBookmarkCreate('bookmark', 'replicated')

Parameters

ttXlaBookmarkCreate has the parameter:

Parameter

Type

Description

bookmark

TT_CHAR (31) NOT NULL

The name of the bookmark to be created.

replicated

BINARY(1)

0x00 or NULL (equivalent) for non-replicated bookmarks (default setting).
0x01 for replicated bookmarks.

If NULL, non-replicated bookmarks are used.

Result set

ttXlaBookmarkCreate returns no results.

Example

For non-replicated bookmark, execute the following:

Command > call ttXlaBookmarkCreate(mybookmark);

or

Command> call ttxlabookmarkcreate('mybkmk2',0x00);

For a replicated bookmark, execute the following:

Command > call ttXlaBookmarkCreate(mybookmark, 0x01);

For more details on XLA bookmarks, including replicated XLA bookmarks, see "About XLA bookmarks" in the Oracle TimesTen In-Memory Database C Developer's Guide.

See also

ttXlaSubscribe
ttXlaUnsubscribe
ttXlaBookmarkDelete

ttXlaBookmarkDelete

Description

This procedure deletes the specified bookmark. The bookmark cannot be deleted while it is in use.

Required privilege

This procedure requires the XLA privilege.

Syntax

ttXlaBookmarkDelete('bookmark')

Parameters

ttXlaBookmarkDelete has the parameter:

Parameter

Type

Description

bookmark

TT_CHAR (31) NOT NULL

The name of the bookmark to be deleted.

Result set

ttXlaBookmarkDelete returns no results.

Example

Command > call ttXlaBookmarkDelete('mybookmark');

Note

Before dropping a table that is subscribed to by an XLA bookmark, you must first drop all XLA bookmarks or unsubscribe from XLA tracking.

See also

ttXlaBookmarkCreate
ttXlaSubscribe
ttXlaUnsubscribe

ttXlaSubscribe

Description

This procedure configures persistent XLA tracking of a table. This procedure cannot be executed when the specified bookmark is in use.

Required privilege

This procedure requires the XLA privilege.

Syntax

ttXlaSubscribe('tblName', 'bookmark')

Parameters

ttXlaSubscribe has the parameters:

Parameter

Type

Description

tblName

TT_CHAR (61) NOT NULL

The name of the table to be tracked.
Using a synonym to specify a table name is not supported.

bookmark

TT_CHAR (31) NOT NULL

The name of the bookmark that the application uses to track this table.

Result set

ttXlaSubscribe returns no results.

Example

Command > call ttXlaSubscribe ('SALLY.ACCTS', mybookmark);

See also

ttXlaBookmarkCreate
ttXlaBookmarkDelete
ttXlaUnsubscribe

ttXlaUnsubscribe

Description

This procedure stops persistent XLA tracking of a table. This procedure cannot be executed when the specified bookmark is in use.

Required privilege

This procedure requires the XLA privilege.

Syntax

ttXlaUnsubscribe('tblName', 'bookmark')

Parameters

ttXlaUnsubscribe has the parameters:

Parameter

Type

Description

tblName

TT_CHAR (61) NOT NULL

The name of the table on which XLA tracking should be stopped.
Using a synonym to specify a table name is not supported.

bookmark

TT_CHAR (31) NOT NULL

The name of the bookmark that the application uses to track this table.

Result set

ttXlaSubscribe returns no results.

Example

Command > call ttXlaSubscribe ('SALLY.ACCTS', mybookmark);

Note

Before dropping a table that is subscribed to by an XLA bookmark, you must first drop all XLA bookmarks or unsubscribe from XLA tracking.

See also

ttXlaBookmarkCreate
ttXlaBookmarkDelete
ttXlaSubscribe

3 Utilities

This chapter provides reference information for TimesTen utilities, beginning with the following introductory sections:

- Overview

- Required authentication and authorization for utilities

Overview

The options for TimesTen utilities are generally not case sensitive, except for single character options. You can use -connstr or -connStr interchangeably. However -v and -V are each unique options.

All utilities return 0 for success and non-zero if an error occurs.

Note:
The utility name and options listed in this chapter are case-insensitive. They are described in mixed case to make the examples and syntax descriptions easier to read.

Required authentication and authorization for utilities

The following sections describe the authentication and authorization required for utilities:

- Required user authentication for utilities

- Required privileges for executing utilities

Required user authentication for utilities

All utilities that require a password prompt for one.

If a UID connection attribute is given but no PWD attribute is given, either through a connection string or in the ODBCINI file for the specified DSN, TimesTen prompts for a password. When explicitly prompted, input is not displayed on the command line.

A password given on the command line, before TimesTen prompts for the password, is visible to the ps command, so use of the PWD connection attribute is not recommended in the first call to the utility. For example, the following command is not recommended:

% ttIsql -connStr "DSN=mydsn;UID=terry;PWD=secret";

Generally, when no UID connection attribute is given, the UID is assumed to be the user name identified by the operating system, and TimesTen does not prompt for a password.

When a utility accepts a DSN, connection string or database path as a parameter, specify the value at the end of the command line.

Required privileges for executing utilities

Certain TimesTen command-line utilities require privileges. Each utility in this chapter describes the privilege required for execution. You may receive a "database not loaded" error if you try to execute any utility with a user other than the instance administrator and the database is not loaded into memory. In this case, we cannot determine the privileges of the user. Thus any utilities requiring privileges have to be run either as the instance administrator or executed while the database is loaded.

ttAdmin

Description

Allows you to:

- Specify policies to automatically or manually load and unload databases from RAM.

- Specify policies to automatically or manually start and stop replication agents for specified databases.

- Start and stop TimesTen cache agents for caching data from Oracle tables. The cache agent is a process that handles Oracle database access on behalf of a TimesTen database. It also handles the aging and autorefresh of the cache groups in the TimesTen database. Before using any cache features, you must start the cache agent. Cache options require that you specify a value for the OracleNetServiceName in the DSN.

Required privilege

This utility requires no privileges to query the database.

Replication options require the ADMIN privilege.

Cache options require the CACHE_MANAGER privilege.

All other options require the ADMIN privilege.

If authentication information is not supplied in the connection string or DSN, this utility prompts for a user ID and password before continuing.

Syntax

ttAdmin {-h | -help | -?}

ttAdmin {-V | -version}

ttAdmin [-ramPolicy always|manual|inUse [-ramGrace secs] ]
[-ramLoad] [-ramUnload]
[-autoreload | -noautoreload]
[-repPolicy always|manual|norestart]
[-reqpQueryThresholdGet]
[-reqpQueryThresholdSet seconds]
[-repStart | -repStop]
[[-cacheUidGet] |
[-cacheUidPwdSet -cacheUid uid [-cachePwd pwd]] |
[-cachePolicy always|manual|norestart] |
[-cacheStart] |
[-cacheStop [-stopTimeout seconds]]]
[-query]
{-connStr connection_string | DSN}

Options

ttAdmin has the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Specifies an ODBC data source name of the database to be administered.

-h -help
-?

Prints a usage message and exits.

-autoreload | -noautoreload

if set to -noautoreload, TimesTen does not automatically reload the database after an invalidation.
If set to -autoreload, TimesTen reloads the database after an invalidation. This is the default behavior.

-cachePolicy

Defines the policy used to determine when the cache agent for the database should run.
always - Specifies that the cache agent should always be running for the database. This option immediately starts the cache agent and when the daemon restarts the cache agent is restarted.

manual (default) - Specifies that the cache agent must be manually started and stopped.

norestart - Specifies that the cache agent for the database is not to be restarted after a failure.

This option requires CACHE_MANAGER privileges.

-cacheStart

Starts a cache agent for the database. This option requires CACHE_MANAGER privileges.

-cacheStop

Stops a cache agent for the database. You should not shut down the cache agent immediately after dropping or altering a cache group. Instead, wait for at least two minutes. Otherwise, the cache agent may not get a chance to clean up the Oracle objects that were used by the AUTOREFRESH feature. This option requires CACHE_MANAGER privileges.

-cachePwd

The password associated with the cache administration user ID that is used to manage autorefresh cache groups and asynchronous writethrough cache groups. The cache administration user has extended privileges. See "Grant privileges to the Oracle users" in the Oracle In-Memory Database Cache User's Guide for more details. This option requires CACHE_MANAGER privileges.

-cacheUid

The cache administration user ID. The cache administration user manages autorefresh cache groups and asynchronous writethrough cache groups. The cache administration user has extended privileges. This option requires CACHE_MANAGER privileges.
See "Grant privileges to the Oracle users" in the Oracle In-Memory Database Cache User's Guide for more details.

-cacheUidGet

Gets the current cache administration user ID for the specified database. This option requires CACHE_MANAGER privileges.

-cacheUidPwdSet

Sets the cache administration user ID and password for the specified database. This option requires CACHE_MANAGER privileges. Must be set with the -cacheUid and -cachePwd options. Some things to consider are:

- You only need to specify the cache administration user ID and password once for each new database.

- You cannot set the cache administration user ID and password while either the cache agent or the replication agent are running.

- The cache administration user ID cannot be reset while there are asynchronous writethrough cache groups or autorefresh cache groups (with a state that is not equal to OFF) on the database.

- The cache administration password can be changed at any time.

-query

Displays a summary of the policy settings for the named database.

-ramGrace secs

Only effective if -ramPolicy is inUse. If nonzero, the database is kept in RAM for secs seconds before being unloaded after the last application disconnects from the database.

-ramLoad

Valid only when -ramPolicy is set to manual. Causes the database to be loaded into RAM.

-ramPolicy policy

Defines the policy used to determine when the database is loaded into system RAM.
always - Specifies that the database should remain in system RAM all the time.

manual- Specifies that the database is only to be loaded in system RAM when explicitly loaded by the user (using the ramLoad option).

inUse (default) - Specifies that the database is only loaded in system RAM when in use (i.e., when applications are connected). The -ramGrace option may be used to modify the behavior of this policy.This option cannot be used with temporary databases. TimesTen only allows a temporary database to be loaded into RAM manually. Trying to set the policy generates a warning.

This option requires ADMIN privileges.

-ramUnload

Valid only when -ramPolicy is set to manual. Causes the database to be unloaded from RAM.

-repPolicy

Defines the policy used to determine when the replication agent starts.
always - Specifies that the agent should always be running for the database. This option immediately starts the replication agent and when the daemon restarts the replication agent is restarted.

manual (default) - Specifies that the replication agent must be manually started and stopped.

norestart - Specifies that the replication agent for the database is not to be restarted after a failure.

This option requires ADMIN privileges.

-repQueryThresholdGet

Returns the number of seconds that a query can be executed by the replication agent before TimesTen writes a warning to the support log and throws an SNMP trap.
A value of 0 indicates that no warning is sent.

This option requires ADMIN privileges.

-repQueryThresholdSet

This option specifies the number of seconds that a query can be executed by the replication agent before TimesTen writes a warning to the support log and throws an SNMP trap.
The specified value takes effect the next time the replication agent is started. The query threshold for the replication agent applies to SQL execution on detail tables of materialized views, ON DELETE CASCADE operations and some internal operations.

The value must be greater than or equal to 0.

Default is 0 and indicates that no warning is sent.

This option requires ADMIN privileges.

-repStop

Stops the database's replication agent.

-stopTimeout seconds

Specifies that the TimesTen daemon should stop the cache agent if it doesn't stop within seconds.
If set to 0, the daemon waits forever for the cache agent. The default value is 100 seconds.

This option requires CACHE_MANAGER privileges.

-V | -version

Prints the release number of ttAdmin and exits.

Examples

A database referred to by DSN SalesData is used by some very performance sensitive applications. So that applications do not have to wait for the database to be loaded from disk into RAM, this database must always remain in RAM. To achieve this, use:

ttAdmin -ramPolicy always SalesData

The SalesData database is normally always resident in RAM. However, it is not being used at all today and should be loaded only when applications are connected to it. To change the RAM policy, use:

ttAdmin -ramPolicy inUse SalesData

To manually control whether the SalesData database is loaded into RAM and to load it now, use the following.

ttAdmin -ramPolicy manual -ramLoad SalesData

To manually unload the SalesData database from RAM, thus preventing any new applications from connecting to the database, use:

ttAdmin -ramPolicy manual -ramUnload SalesData

A database referred to by DSN History is not always in use. Permanently loading it into RAM unnecessarily uses memory. This database is idle for long periods, but when it is in use multiple users connect to it in rapid succession. To improve performance, it may be best to keep the database in RAM when applications are connected to it and to keep it in RAM for 5 minutes (300 seconds) after the last user disconnects. With this RAM policy, as long as applications are connected to the database, the database remains in RAM. To set this policy, use:

ttAdmin -ramPolicy inUse -ramGrace 300 History

A database referred to by DSN SalesData is used to cache Oracle data. Use the following ttAdmin command to start the cache agent for the SalesData DSN:

ttAdmin -cacheStart SalesData

You can also use the -cachePolicy option to ask the TimesTen data manager daemon to start the cache agent every time the data manager itself is started. Use:

ttAdmin -cachePolicy always SalesData

To turn off the automatic start of cache agent, use:

ttAdmin -cachePolicy manual SalesData

To set the cache administration user ID and password, the -cacheUidPwdSet flag with the -cacheUid and -cachePwd options can be used with ttAdmin. For example, if the cache administration user ID and password on the database SalesData should be scott and tiger respectively, use:

ttAdmin -cacheUidPwdSet -cacheUid scott -cachPwd tiger SalesData

To get the current cache administration user ID for the SalesData DSN, use:

ttAdmin -cacheUidGet SalesData

ttAdmin displays the following output:

Cache User Id: scott
RAM Residence Policy: inUse
Replication Agent Policy: manual
Replication Manually Started: False
Cache Agent Policy: manual
Cache Agent Manually Started: False

Notes

If TimesTen is installed as a user instance, and the user attempts to start the cache agent for a database with a relative path, TimesTen looks for the database relative to where it is running, and fails. Therefore, a relative path should not be used in this scenario. For example, on Windows, if you have specified the path for the database as DataStore=./dsn1 and attempt to start the cache agent with the command ttAdmin -cacheStart dsn1, the cache agent does not start because it looks for the database in install_dir\srv\dsn1. For UNIX it looks in a directory in /var/TimesTen/instance/.

When using autorefresh (automatic propagation from oracle to timesten) or asynchronous writethrough cache groups, you must specify the cache administration user ID and password. This user account is used to perform autorefresh and asynchronous writethrough operations.

To load Oracle data, the TimesTen cache agent must be running. This requires that the ORACLE_HOME environment variable be set to the path of the Oracle installation. See the Oracle In-Memory Database Cache User's Guide for more details. For details on other environment variables that you may want to set, see "Environment variables" in Oracle TimesTen In-Memory Database Installation Guide.

This utility is supported only for TimesTen Data Manager DSNs. It is not supported for TimesTen Client DSNs.

If ttAdmin is used with -repStart and it does not find a replication definition, the replication agent is not started and ttAdmin prints out an error message. For example:

$ ttAdmin -repstart repl1
*** [TimesTen][TimesTen 11.2.2.0.0 ODBC Driver][TimesTen]TT8191:
This store (repl1 on my_host) is not involved in a replication scheme --
file "eeProc.c", lineno 11016, procedure "RepAdmin()"
*** ODBC Error = S1000, TimesTen Error = 8191

If ttAdmin is used with the -ramPolicy always option, a persistent system connection is created on the database. The -ramPolicy always option can only be specified on shared databases.

The only -ramPolicy value supported for temporary databases is the -ramPolicy manual option with the -ramLoad option specified at the same time.

If ttAdmin is used with -repPolicy manual (the default) or -repPolicy always, then the -ramPolicy always option should also be used. This ensures that the replication agent begins recovery after a failure as quickly as possible.

See also

ttStatus
ttCachePolicySet
ttCacheUidGet
ttCacheUidPwdSet
ttCacheStart
ttCacheStop

ttAdoptStores

Description

On UNIX systems, use this utility to move databases from a TimesTen instance to a new TimesTen instance that is of the same major release, but of a different minor release. For example, you can move files from TimesTen 11.2.2.0.0 to TimesTen 11.2.2.1.0.

Note:
A major release refers to the first three digits of the release number. A minor release refers to the last two digits of the release number.

This utility is useful for testing a minor release of Times with an existing database. You can install the new release of TimesTen and move one or more databases to the new release without uninstalling the old TimesTen release.

You must run the ttAdoptStores utility from the destination instance.

Required privilege

This utility must be run by the TimesTen instance administrator. The instance administrator must be the same user for both the old and new TimesTen instance.

Syntax

ttadoptstores {-h | -help | -?}
ttadoptstores {-V | -version}
ttadoptstores [-quiet] -dspath path
ttadoptstores [-quiet] -instpath path

Options

ttAdoptStores has the options:

Option

Description

-dspath path

Adopts a single database. The path argument must be the path to the database files (without any file extensions).

-h
-help

?

Prints a usage message and exits.

-instpath path

Adopts all databases for an instance. The path argument must be the path to the daemon working directory (infodir).
If any databases are in use, the utility fails without making any modifications. No new connections to any database are allowed in the source instance until the entire operation has completed.

-quiet

Do not return verbose messages.

-V | -version

Prints the release number of ttAdoptStores and exits.

Examples

To adopt the database /my/data/stores/ds, use:

ttadoptstores -dspath /my/data/stores/ds

To adopt all the databases in the directory /opt/TimesTen/ instance1, use:

ttadoptstores -instpath /opt/TimesTen/instance1

Note

You cannot adopt temporary databases.

If an instance being adopted is part of a replication scheme, port numbers must match on each side of the replication scheme, unless a port number was specified as the value of the -remoteDaemonPort option during a ttRepAdmin -duplicate operation. Generally, all instances involved in the replication scheme must be updated at the same time.

This utility does not copy any sys.odbc.ini entries. You must move these files manually.

ttBackup

Description

Creates a backup copy of a database that can be restored at a later time using the ttRestore utility. If the database is in use at the time of backup, it must be in shared mode to enable ttBackup. For an overview of the TimesTen backup and restore facility, see "Migration, Backup, and Restoration" in Oracle TimesTen In-Memory Database Installation Guide.

Required privilege

This utility requires the ADMIN privilege.

If authentication information is not supplied in the connection string or DSN, this utility prompts for a user ID and password before continuing.

Syntax

ttBackup {-h | -help | -?}
ttBackup {-V | -version}
ttBackup -dir directory [-type backupType]
[-fname fileprefix] [-force]
{-connStr connection_string | DSN}

Options

ttBackup has the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Specifies an ODBC data source name of the database to be backed up.

-dir directory

Specifies the directory where the backup files should be stored.

-fname fileprefix

Specifies the file prefix for the backup files in the backup directory. The default value for this option is the file name portion of the DataStore parameter of the database's ODBC definition.

-force

Forces the backup into the specified directory. If a backup exists in that directory, ttBackup overwrites it. If this option is not specified ttBackup terminates with an end message without overwriting existing files.

-h -help -?

Prints a usage message and exits.

-type backupType

Specifies the type of backup to be performed. Valid values are:
fileFull (default) - Performs a full file backup to the backup path specified by the directory and fileprefix parameters. The resulting backup is not enabled for incremental backup.

fileFullEnable - Performs a full file backup to the backup path specified by the directory and fileprefix parameters. The resulting backup is enabled for incremental backup.

fileIncremental - Performs an incremental file backup to the backup path specified by the directory and fileprefix parameters, if that backup path contains an incremental-enabled backup of the database. Otherwise, an error is returned.

fileIncrOrFull - Performs an incremental file backup to the backup path specified by the directory and fileprefix parameters if that backup path contains an incremental-enabled backup of the database. Otherwise, it performs a full file backup of the database and marks it incremental enabled.

streamFull - Performs a stream backup to standard out

incrementalStop - Does not perform a backup. Disables incremental backups for the backup path specified by the directory and fileprefix parameters. This prevents transaction log files from accumulating for an incremental backup.

-V | -version

Prints the release number of ttBackup and exits.

Examples

To perform a full file backup of the FastIns database to the backup directory in/users/pat/TimesTen/backups, use:

ttBackup -type fileFullEnable -dir /users/pat/TimesTen/backups FastIns

To copy the FastIns database to the file FastIns.back, use:

ttBackup -type streamFull FastIns > FastIns.back

On UNIX, to save the FastIns database to a backup tape, use:

ttBackup -type streamFull FastIns | dd bs=64k of=/dev/rmt0

To back up a database named origDSN to the directory /users/rob/tmp and restore it to the database named restoredDSN, use:

ttBackup -type fileFull -dir /users/rob/tmp -fname restored origDSN
ttRestore -dir /users/rob/tmp -fname restored restoredDSN

Notes

The ttBackup utility and the ttRestore utility can be used to backup and restore databases only when the first three numbers of the TimesTen release are the same. For example, you can backup and restore files between releases 11.2.2.2.0 and 11.2.2.3.0. You cannot backup and restore files between releases 11.2.1.9.0 and 11.2.2.3.0. You can use the ttMigrate or ttMigrateCS utility to migrate databases across major releases, operating systems, operating system bit levels or CPU types.

When an incremental backup has been enabled, TimesTen creates a backup hold in the transaction log file. This hold can be seen using the ttLogHolds built-in procedure. The backup hold is used to determine which log records should be backed up upon subsequent incremental backups. Only changes since the last incremental backup are updated. A side effect to creating the backup hold is that it prevents transaction log files from being purged upon a checkpoint operation until the hold is advanced by performing another incremental backup or removed by disabling incremental backups.

Transactions that commit after the start of the backup operation are not reflected in the backup.

Up to one checkpoint and one backup may be active at the same time, with these limitations:

- A backup never needs to wait for a checkpoint to complete.

- A backup may need to wait for another backup to complete.

- A checkpoint may need to wait for a backup to complete.

Databases containing cache groups can be backed up as normal with the ttBackup utility. However, when restoring such a backup, special consideration is required as the restored data within the cache groups may be out of date or out of sync with the data in the backend Oracle database. See the section on "Backing up and restoring a database with cache groups" in the Oracle In-Memory Database Cache User's Guide for details.

You cannot back up temporary databases.

See also

ttBulkCp
ttMigrate
ttRestore

ttBulkCp

Description

Copies data between TimesTen tables and ASCII files. ttBulkCp has two modes:

- In copy-in mode rows are copied into an existing TimesTen table from one or more ASCII files (or stdin).

- In copy-out mode an entire TimesTen table is copied to a single ASCII output file (or stdout).

On UNIX, this utility is supported for TimesTen Data Manager DSNs. For Client DSNs, use the utility ttBulkCpCS.This utility only copies out the objects owned by the user executing the utility, and those objects for which the owner has SELECT privileges. If the owner executing the utility has the ADMIN privilege, ttBulkCP copies out all objects.

Required privilege

This utility requires the INSERT privilege on the tables it copies information into. It requires the SELECT privilege on the tables it copies information from. If authentication information is not supplied in the connection string or DSN, this utility prompts for a user ID and password before continuing.

Syntax

ttBulkCp {-h | -help | -? | -helpfull}

ttBulkCp {-V | -version}

ttBulkCp -i [-cp numTrans | final] [-d errLevel]
[-e errorFile] [-m maxErrs] [-sc] [-t errLevel]
[-u errLevel] [-v 0|1] [-xp numRows | rollback]
[-Cc | -Cnone] [-tformat timeFormat] [-dateMode dateMode]
[-tsformat timeStampFormat] [-dformat | -D dateFormat]
[-F firstRow] [-L lastRow] [-N ncharEncoding] [-Q 0|1]
[-S errLevel] {-connStr connection_string | DSN}
[owner.]tableName [dataFile ...]

ttBulkCp -o [-sc] [-v 0|1] [-A 0|1] [-Cc | -Cnone]
[-nullFormat formatStr}
[-tformat timeFormat] [-tsformat timeStampFormat]
[-dateMode dateMode] [-dformat | -D dateFormat]
[-N ncharEncoding] [-noForceSerializable | -forceSerializable]
[-tsprec precision] [-Q 0|1]
{-connStr connection_string | DSN} [owner.]tblName
[dataFile]

Options

ttBulkCp has the following options.

Option

Description

-Cnone
-Cc

-Cnone disables the use of comments in the output file.-Cc sets the default comment character to c. If no default comment character is specified, the pound character (#) is used. The -C option takes the values: \t (tab) or any of the characters:~ ! @ # % ^ & * ( ) = : ; | < > ? , / This option overrides the COMMENTCHAR file attribute.

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Specifies an ODBC data source name of the database to be copied.

-D | -dformat
dateFormat

Sets the date format. Legal fixed values are described in "Date, time and timestamp values". This option overrides the DFORMAT file attribute. The default is ODBC.
See also -tformat and -tsformat.

dataFile

For copy-in mode, specifies the path name(s) of one or more ASCII files containing rows to be inserted into the table. If no files are given, the standard input is used. A single hyphen (-) is understood to mean the standard input. For copy-out mode, specifies the path name of the file into which rows should be copied. If no file is given, the standard output is used. A single hyphen (-) is understood to mean the standard output.

-dateMode dateMode

Specifies whether ttBulkCp treats an Oracle DATE type as a simple date (without hour, minute and second fields) or as a timestamp (with hour, minute and second fields).
For copy-in mode, the default behavior for input is date.

For copy-out mode, the default behavior for output is timestamp.

TimesTen truncates the data and issues a warning if you select -dateMode date in output mode and one or more date columns have a time component that is not 12:00:00 am.

This option overrides the DATEMODE file attribute.

-forceSerializable -noForceSerializable

The -forceSerializable option indicates that ttBulkCp should use serializable isolation regardless of the DSN or connection string settings. This is the default behavior.
-noForceSerializable indicates that ttBulkCp should honor the isolation level in the DSN or connection string.

If you specify the -noForceSerializable option and the DSN or connection string indicates a non-serializable isolation mode, a warning is included in the output:

Warning: This output was produced using a
non-serializable isolation level. It may therefore not
reflect a transaction-consistent state of the table.

For more information on isolation modes, see "Transaction isolation levels" in Oracle TimesTen In-Memory Database Operations Guide.

-h -help
-?

Prints a short usage message and exits.

-helpfull

Prints a longer usage message and exits.

-i

Selects copy-in mode.

-m maxErrors

Maximum number of errors to report. Default is 10; a few extra related errors may be reported. If 0, the utility only connects, then returns.

-N ncharEncoding

Specifies the input and output character encoding for NCHAR types. Valid values are UTF8, UTF-8 or ASCII.

-nullFormat formatStr

Specifies the format in which NULL values are printed. Valid values are:
null (default) - The word NULL is printed for null fields.

empty - Nothing is printed for null fields.

An empty LOB is printed as NULL in no-quotes mode and as " " in quote mode. When copied in, both NULL and " " are interpreted as a NULL LOB.

-o

Selects copy-out mode.

owner

Specifies the owner of the table to be saved or loaded. If owner is omitted, TimesTen looks for the table under the user's name and then under the user name SYS. This parameter is case-insensitive.

-Q [0 | 1]

Indicates whether character-string values should be enclosed in double quotes.
0 - Indicates that strings should not be quoted. This document refers to this mode as "no quote mode."

1 (default) - Indicates that strings should be quoted.This option overrides the QUOTES file attribute. This document refers to this mode as "quote mode."

-s c

Sets the default field-separator character to c. If no default field-separator is specified, a comma (,) is used. The -s option takes the values \t (tab) or any of the characters:~ ! @ # % ^ & * ( ) = : ; | < > ? , / This option overrides the FSEP file attribute.

tableName

Specifies the name of the table to be saved or loaded. This parameter is case-insensitive.

-tformat
timeFormat

Sets the time format. Legal values are defined in "Date, time and timestamp values". The default value is ODBC. This option overrides the TSFORMAT file attribute.
See also -D | -dformat and -tsformat.

-tsformat
timestampFormat

Sets the timestamp format. Legal fixed values are described in "Date, time and timestamp values". The default value is DF*TF+FF, which is the concatenation of the date format, the time format and fractional seconds. This option overrides the TFORMAT file attribute.
See also -D | -dformat and -tformat.

-V | -version

Prints the release number of ttBulkCp and exits.

-v [0 | 1]

Sets the verbosity level.
0 - Suppresses the summary.

1 (default) - Prints a summary of rows copied upon completion.

The following options can be used in copy-out (-o) mode only. You must have SELECT privileges on the specified tables.

Option

Description

-A [0 | 1]

Indicates whether ttBulkCp should suppress attribute lines in the output file.
0 (default) - ttBulkCp may write attribute lines into the output file.

1 - Suppresses output of attribute lines.

-tsprec precision

When used with the -o option, truncates timestamp values to precision. ttBulkCp allows up to 6 digits in the fraction of a second field. Truncation may be necessary when copying timestamps using other RDBMS.

The following options can be used in copy-in (-i) mode only. You must have INSERT privileges on the specified tables.

Option

Description

-cp numTrans
-cp final

Sets the checkpoint policy for the copy in.
A value of 0 indicates that ttBulkCp should never checkpoint the database, even after the entire copy is complete.

A nonzero value indicates that ttBulkCp should checkpoint the database after every numTrans transactions, and again after the entire load is complete.

A value of final indicates that ttBulkCp should checkpoint the database only when the entire copy is complete. The default value is 0.

Periodic checkpoints can only be enabled if periodic commits are also enabled. See the -xp option.

-d error
-d warn

-d ignore

By default, ttBulkCp does not consider rows that are rejected because of constraint violations in a unique column or index to be errors.
-d error - Specifies that constraint violations should be considered errors. Duplicate rows are then counted against maxErrs (see -m) and placed into the error file (see -e).

-d warn - Specifies that ttBulkCp should copy the offending rows into the error file but should not count them as errors.

-d ignore (default) - Specifies that ttBulkCp should silently ignore duplicate rows.

Regardless of the setting of -d, the duplicate rows are not inserted into the table.

-e errFile

Indicates the name of the file in which ttBulkCp should place information about rows that cannot be copied into the TimesTen table because of errors. These errors include parsing errors, type-conversion errors and constraint violations. The value of errFile defaults to stderr. The format of the error file is the same as the format of the input file (see "datafile format"), so it should be possible to correct the errors in the error file and use the corrected error file as an input file for a subsequent run of ttBulkCp.

-F firstRow

Indicates the number of the first row that should be copied. This option can be used (perhaps with -L) to copy a subset of rows into the TimesTen table. Rows are numbered starting at 1. If more than one input file is specified, rows are numbered consecutively throughout all the files. The default value is 1.

-L lastRow

Indicates the number of the last row that should be copied. See the description of -F. A value of 0 specifies the last row of the last input file. The default value is 0.

-S error
-S warn

-S ignore

By default, ttBulkCp issues an error when it encounters a value that exceeds its maximum scale. This error can be generated for a decimal value whose scale exceeds the maximum scale of its column or for a TIMESTAMP value with more than 6 decimal places of fractional seconds (i.e., sub-microsecond granularity).
-S error (default) - Specifies that ttBulkCp should not insert a row containing a value that exceeds its maximum scale into the table and that it should place an error into the error file.

-S warn - Specifies that ttBulkCp should right-truncate the value to its maximum scale before inserting the row into the table and that it should place a warning into the error file.

-S ignore - Specifies that ttBulkCp should silently right-truncate the value to its maximum scale before inserting the row into the table.

-t error
-t warn

-t ignore

By default, ttBulkCp issues an error when a CHAR, VARCHAR2, NCHAR, NVARCHAR2, BINARY, VARBINARY, BLOB, CLOB, or NLOB value is longer than its maximum column width.
-t error (default) - Specifies that rows containing long string or binary attributes should not be inserted into the TimesTen table and that an error should be placed into the error file.

-t warn - Specifies that long string or binary attributes should be truncated to the maximum column length before being inserted into the table but that a warning should be placed into the error file.

-t ignore - Specifies that long string or binary attributes should be silently truncated to the maximum column length before being inserted into the table.

-u error
-u warn

-u ignore

By default, ttBulkCp issues an error when a real, float or double attribute underflows. Underflow occurs when a floating point number is so small that it is rounded to zero.
-u error (default) - Specifies that rows containing a real, float or double value that underflow should not be inserted into the TimesTen table and that an error should be placed into the error file.

-u warn - Specifies that 0.0 should be inserted for real, float or double attributes that underflow, but that a warning should be placed into the error file.

-u ignore - Specifies that 0.0 should be silently inserted for real, float or double attributes that underflow.

-xp numRows
-xp rollback

Sets the transaction policy for the load. A value of 0 indicates that ttBulkCp should perform the entire load as a single transaction and should commit that transaction whether the load succeeds or fails.
A value of rollback indicates that ttBulkCp should perform the entire load as a single transaction and should roll that transaction back if the load fails.

A nonzero value indicates that ttBulkCp should commit after every numRows processed rows.

The default value is 1024.

The -xp option can be used with -cp option to enable periodic checkpointing of the database.

datafile format

Every line of a ttBulkCp input file is one of the following: a blank line, a comment line, an attribute line or a data line.

- Blank lines are lines with no characters at all, including whitespace characters (space and tab). Blank lines are ignored by ttBulkCp.

- Comment lines begin with the comment character. The default comment character is #; this default can be overridden with the -C command-line option or the COMMENTCHAR file attribute (see "File attribute line format"). The comment character must be the first character on the line. Comment lines are ignored by ttBulkCp. Comments at the end of data lines are not supported.

- File attribute lines are used for setting file attributes that control the formatting of the datafile. Attribute lines begin with the ten-character sequence ##ttBulkCp. The full syntax for attribute lines is described in "File attribute line format". Attribute lines can appear anywhere in the datafile.

- Data lines contain the rows of the table being copied. Data lines in the datafile and rows of the table correspond one-to-one; that is, each data line completely describes exactly one row. Each data line consists of a list of column values separated by the field separator character. The default field separator is a comma (,). This default can be overridden by the -s command-line option or the FSEP file attribute. The full syntax for data lines is described in "Data line format".

File attribute line format

The format of an attribute line is:

##ttBulkCp[:attribute=value]...

Attribute lines always begin with the ten-character sequence ##ttBulkCp, even if the comment character is not #. This sequence is followed by zero or more file attribute settings, each preceded by a colon.

File attribute settings remain in effect until the end of the input file or until they are changed by another attribute line in the same input file. The values of any file attributes that are omitted in an attribute line are left unchanged.

Most command line options take precedence over the values in the file attributes that are supported by ttBulkCp. The CHARACTERSET attribute is the only file attribute that overrides command line options.

The file attributes are:

- CHARACTERSET: Specifies the character set to be used to interpret the data file. If the file attribute is not set, the character set used to interpret the file will be the one specified in the ConnectionCharacterSet connection attribute. For best performance, the value of the DatabaseCharacterSet connection attribute should match either the ConnectionCharacterSet connection attribute or this file attribute. If the character set supplied in ConnectionCharacterSet connection attribute or in this file attribute is different than the actual character set of the file, ttBulkCp may interpret data incorrectly.

- VERSION: Specifies the version of the file format used in the file, expressed as major.minor. The only supported version is 1.0.

- DATEMODE: Specifies whether an Oracle DATE type is specified as simple date or as timestamp.

- FSEP: Specifies the field separator character used in the file. The field separator can be set to \t (tab) or any of the characters: ~ ! @ # $ % ^ & * ( ) = : ; | < > ? , /

- QUOTES: Indicates whether character string values in the file are enclosed in double quotes. The value can be 0, to indicate that strings are not quoted, or 1, to indicate that strings are quoted. This value can be overridden with the -Q option.

- COMMENTCHAR: Specifies the comment character used in the file. The comment character can be set to \t (tab) or any of the characters: ~ ! @ # $ % ^ & * ( ) = : ; | < > ? , /

The comment character can also be set to the value none, which disables the use of comments in the datafile.

- DFORMAT: Sets the date format. Legal values are described in "Date, time and timestamp values". When a custom format is used, it should be enclosed in single quotes. This value can be overridden with the -D/-dformat command-line option. See also TFORMAT and TSFORMAT.

- NCHARENCODING: Indicates the encoding to be used for the NCHAR and NVARCHAR2 data types. The value may be either ASCII or UTF-8.

- TFORMAT: Indicates the time format. Legal values are described in "Date, time and timestamp values". When a custom format is used, it should be enclosed in single quotes. This value can be overridden with the -tformat command-line option. See also DFORMAT and TSFORMAT.

- TSFORMAT: Sets the timestamp format. Legal values are described in "Date, time and timestamp values". When a custom format is used, it should be enclosed in single quotes. This value can be overridden with the -tsformat command-line option. See also DFORMAT and TFORMAT.

Examples

The following header line sets the field separator character to $ and disables quoting of character strings:

##ttBulkCp:FSEP=$:QUOTES=0

The following header line disables comments and sets the date format to the Oracle format:

##ttBulkCp:COMMENTCHAR=none:DFORMAT=Oracle

The following header line set the date format to a custom format:

##ttBulkCp:DFORMAT='Mon DD, YYYY'

Data line format

Data lines contain the row data of the table being copied. Each data line corresponds to a row of the table; rows cannot span input-file lines. A data line consists of a list of column values separated by the field separator character. Unnecessary whitespace characters should not be placed either before or after the field separator. The format of each value is determined by its type.

NULL values

NULL values can either be expressed as NULL (all capitals, no quotes) or as empty fields.

Character and unicode strings

CHAR, VARCHAR2, NCHAR, NVARCHAR2, CLOB, NCLOB: If quoting of character strings is enabled (the default), then strings and characters must be enclosed in double quotes. If quoting of character strings is disabled, then any double-quote characters in the string are considered to be part of the string itself. ttBulkCp recognizes the following backslash-escapes inside a character string, regardless of whether quoting of strings is enabled:

- \" The double-quote character. If character-string quoting is enabled, then all double quote characters in the string must be escaped with a backslash. If character-string quoting is disabled, then it is permissible, but not necessary, to use the backslash.

- \t The tab character.

- \n The newline character.

- \r The carriage return character.

- \\ The backslash character.

- \xyz (CHAR and VARCHAR2 only) The character whose ASCII value is xyz, where xyz is a three-character octal number, as in \033.

- \uxyzw (NCHAR and NVARCHAR2 only) The character whose unicode value is xyzw, where xyzw is a four-digit hexadecimal number, as in\ufe4a. The \uxyzw notation is supported in both UTF-8 and ASCII encoding modes.

In addition, any of the ~ ! @ # $ % ^ & * ( ) = : ; | < > ? , / characters can be escaped with a backslash. Although it is unnecessary to escape these characters in most cases, doing so prevents them from being mistaken for a comment character or a field separator when character-string quoting is disabled.

If character-string quoting is enabled, the empty string (represented as " ") is distinct from NULL. If character-string quoting is disabled, then empty strings cannot be represented, as they cannot be distinguished from NULL.

For unicode strings, unicode characters encoded using UTF-8 multibyte sequences are supported in the UTF-8 encoding mode only. If these sequences are used with the ASCII encoding mode, ttBulkCp interprets each byte in the sequence as a separate character.

For fixed-length CHAR and NCHAR fields, strings that are shorter than the field length are padded with blanks. For VARCHAR2 and NVARCHAR2 fields, the string is entered into TimesTen exactly as given in the datafile. Trailing blanks are neither added nor removed.

Binary values

BINARY, VARBINARY, BLOB: If quoting of character strings is enabled (the default), binary values are delimited by curly braces ({...}). If quoting of character strings is disabled, then curly braces should not be used. Whether character-string quoting is enabled or disabled, binary values may start with an optional 0x or 0X.

Each byte of binary data is expressed as two hexadecimal digits. For example, the four-byte binary string:

01101000 11001010 01001001 11101111

would be expressed as the eight-character hexadecimal string:

68CA49EF

Digits represented by the letters A through F can either be upper- or lower-case. The hexadecimal string cannot contain white spaces. Because each pair of characters in the hexadecimal string is converted to a single binary byte, the hexadecimal string must contain an even number of characters. For fixed-length binary fields, if the given value is shorter than the column length, the value is padded with zeros on the right. For varbinary values, the binary value is inserted into TimesTen exactly as given in the datafile.

If character-string quoting is enabled, a zero-length binary value (represented as { }) is distinct from NULL. If character-string quoting is disabled, then zero-length binary values cannot be represented, as they cannot be distinguished from NULL.

Integer values

TINYINT, SMALLINT, INTEGER, BIGINT: Integer values consist of an optional sign followed by one or more digits. Integer values may not use E-notation. Examples:

-14 98765 +186

Floating-point values

REAL, FLOAT, DOUBLE: Floating-point values can be expressed with or without decimal points and may use E-notation. Examples:

3.1415
-0.00004
1.1e-3
5e3
.56
-682
-.62E-4
170.

Fixed-point values

DECIMAL, NUMERIC: Decimal values can be expressed with or without decimal points. Decimal values may not use E-notation. Examples:

5
-19.5
-11
000
-.1234
45.
-57.0
0.8888

Inf, -Inf and NaN values

Inf, -Inf and Nan values: Infinity and Not a Number values can be represented as strings to represent the corresponding constant value (all are case insensitive):

String

Value

NAN

NaN

[+]INF

Inf

-INF

-Inf

TimesTen outputs the values as: NAN, INF and -Inf.

Date, time and timestamp values

Formats for date, time and timestamp values can be specified either by selecting a fixed datetime format or by defining a custom datetime format. The custom datetime formats are defined using format specifiers similar to those used by the TO_DATE and TO_CHAR SQL functions, as described in the following table.

In many cases, it is not necessary to define the timestamp format, even when a custom date or time format is used, because the default TimesTen format (DF*TF+FF) is defined in terms of the date and time formats. Therefore, setting the date format sets not only the format for date values, but also for the date portion of timestamp values. Similarly, setting the timestamp format affects both time values and the time portion of the timestamp values.

Specifier

Descriptions and restrictions

Q

Quarter. Cannot be used in copy-in mode.

YYYY

Year (four digits).

Y,YYY

Year (with comma as shown).

YYY

Year (last three digits). Cannot be used in copy-in mode.

Y

Year (last digit). Cannot be used in copy-in mode.

MONTH

Month (full name, blank-padded to 9 characters, case-insensitive).

MON

Month (three character prefix, case-insensitive).

MM

Month (01 through 12).

DD

Day of the month (01 through 31).

HH24

Hour (00 through 23).

HH12

Hour (01 through 12). Must be used with AM/PM for copy-in mode.

HH

Hour (01 through 12). Must be used with AM/PM for copy-in mode.

MI

Minute (00 through 59).

SS

Second (00 through 59).

FF

Fractional seconds.Six digits, unless overridden with the -tsprec option.

FFn

Fractional seconds (number of digits specified by n).

+FF

In copy-in mode, matches, optional decimal point plus one or more fractional seconds. In copy-out mode, same as .FF.

+FFn

In copy-in mode, same as +FF. In copy-out mode, same as .FFn.

AM PM

Meridian indicator without dots. In copy-in mode, this must be used with HH or HH12, but not HH24.

A.M.
P.M.

Meridian indicator with dots. In copy-in mode, this must be used with HH or HH12, but not HH24.

DF

Current date format (can only be used in timestamp format).

TF

Current time format (can only be used in timestamp format).

- / ; :

Punctuation that are matched in copy-in mode or output in copy-out mode.

"text"

Text that is matched in input mode or output in copy-out mode.

*

Matches 0 or more whitespace characters (space or tab) in copy-in mode or outputs 1 space in copy-out mode.

Fixed, date, time and timestamp formats

For date values, the fixed formats are:

Format

Description

ODBC

YYYY-MM-DD
Example: 2011-01-03

(default value)

Oracle

DD-Mon-YYYY
Example: 03-Jan-2011

SYBASE1

MM/DD/YYYY
Example: 01/03/2011

SYBASE2

DD-MM-YYYY
Example: 03-01-2011

SYBASE3

Mon*DD*YYYY
Example: Jan 03 2011

For time values, the only fixed format is ODBC:

Format

Description

ODBC

HH24:MI:SS
Example: 07:47:23

For timestamp values, the fixed formats are:

Format

Description

ODBC

YYYY-MM-DD*HH24:MI:SS+FF
Example: 2011-01-03 07:47:23

Oracle

DD-Mon-YYYY*HH24:MI:SS+FF
Example: 03-Jan-2011 07:47:23

SYBASE1

MM/DD/YYYY*HH24:MI:SS+FF
Example: 01/03/2011 07:47:23

SYBASE2

DD-MM-YYYY*HH24:MI:SS+FF
Example: 03-01-2011 07:47:23

SYBASE3

Mon*DD*YYYY*HH24:MI:SS+FF
Example: Jan 03 2011 07:47:23

The default timestamp value is: 'DF*TF+FF'

Examples

The following input file is for a table with five columns: two char columns, a double column, an integer column and a varbinary column. In the "Mountain View" line, the last three columns have NULL values.

##ttBulkCp
# This is a comment.
###### So is this.
# The following line is a blank line.

"New York","New York",-345.09,12,{12EF87A4E5}
"Milan","Italy",0,0,{0x458F}
"Paris","France",1.4E12,NULL,{F009}
"Tokyo","Japan",-4.5E-18,26,{0x00}
"Mountain View","California",,,

Here is an equivalent input file in which quotes are disabled, the comment character is '$' and the field separator is '|':

##ttBulkCp:QUOTES=0:COMMENTCHAR=$:FSEP=|
$ This is a comment.
$$$$$$ So is this.
$ The following line is a blank line.

New York|New York|-345.09|12|12EF87A4E5
Milan|Italy|0|0|0x458F
Paris|France|1.4E12|NULL|F009
Tokyo|Japan|-4.5E-18|26|0x00
Mountain View|California|||

The following command dumps the contents of table mytbl from database mystore into a file called mytbl.dump.

ttBulkCp -o DSN=mystore mytbl mytbl.dump

The following command loads the rows listed in file mytbl.dump into a table called mytbl on database mystore, placing any error messages into the file mytbl.err.

ttBulkCp -i -e mytbl.err DSN=mystore mytbl mytbl.dump

The above command terminates after the first error occurs. To force the copy to continue until the end of the input file (or a fatal error), use -m 0, as in:

ttBulkCp -i -e mytbl.err -m 0 DSN=mystore mytbl mytbl.dump

To ignore errors caused by constraint violations, use -d ignore:

ttBulkCp -i -e mytbl.err -d ignore DSN=mystore mytbl mytbl.dump

Notes

ttBulkCp explicitly sets the Overwrite connection attribute to 0, to prevent accidental destruction of a database. For more information, see "Overwrite".

Real, float or double values may be rounded to zero when the floating point number is small.

The connection attribute PassThrough with a non-zero value is not supported with this utility and will return an error.

When specifying date, time and timestamp formats, incomplete or redundant formats are not allowed in input mode. Specifiers that reference fields that are not present in the data type (for example a minute specifier in a date format) return errors in copy-out mode. In copy-in mode, the values of those specifiers are ignored.

The following caveats apply when disabling quoted strings in the ttBulkCp datafile:

- Empty strings and zero-length binary values cannot be expressed, as they cannot be distinguished from NULL.

- If the field separator character appears inside a character string, it must be escaped with a backslash or else it is treated as an actual field separator.

- If a data line begins with a character string and that string begins with the comment character, that character must be escaped with a backslash or else the line is treated as a comment. Setting the comment character to none can prevent this, as long as there are no actual comments in the file.

For UTF-8, NCHAR are converted to UTF-8 encoding and then output. UTF-8 input is converted to NCHAR.

For ASCII, those NCHAR values that correspond to ASCII characters are output as ASCII. For those NCHAR values outside of the ASCII range, the escaped Unicode format is used.

On Windows, this utility is supported for all TimesTen Data Manager and Client DSNs.

It is recommended that you do not run DDL SQL commands while running ttBulkCp to avoid lock contention issues for your application.

See also

ttBackup
ttMigrate
ttRestore

ttCacheAdvisor

Description

Assists in configuring an Oracle In-Memory Database (IMDB) Cache for optimal performance and minimal storage overhead. This utility evaluates a captured SQL workload running on a target Oracle database, or an existing SQL tuning set. It also evaluates the schema definitions from the target database.

This utility analyzes the table and column usage patterns, and recommends TimesTen cache group definitions to improve the workload performance by generating a report and an implementation script. It also optionally evaluates the performance of the recommended cache and compares it with the performance of the target Oracle database.

Required privilege

This utility requires the instance administrator privilege.

Syntax

General analysis

ttCacheAdvisor
-oraTarget
{-oraConn Oracle_connection_string} ...
-oraDirObject Oracle_directory_object
[{-oraDirNfs path} | {-ftp network_connection_string}]
-oraRepository
-oraConn Oracle_connection_string
-oraDirObject Oracle_directory_object
[{-oraDirNfs path} | {-ftp network_connection_string}]
-ttConn TimesTen_connection_string
[-captureCursorCache minutes] [-flushSharedPool] [-plsqlInfo]]
[-cacheSize {{size{MB|GB|TB}} | UNLIMITED}]
[-writethruThreshold percent%]
[-report path]
[-evalSqlPerf [maximum[%]]]
[-task task_name]
[-description string]
[-rerun]
[-showSql]
[{-import [-noSchema] path} ...]
[-add
{-tableAttrib [owner.]table_name
{-pk '(column_name, ...)' |
-fk '(column_name, ...) REFERENCES (primary_key_column_name, ...)
[ON DELETE CASCADE]' |
-where '(predicate)'} ...
} ...]
[-drop
{-tableAttrib [owner.]table_name
{-pk | -fk | -where} ...
} ...]
[{{-add | -drop} -sqlSet [owner.]sql_set_name}
[{-command | @} path]

You can repeat the options for -oraTarget to specify multiple users for the same target Oracle database to analyze objects from more than one schema. There can be only one Oracle repository specification in a Cache Advisor evaluation run.

String values may be optionally enclosed in single or double quotes. If the string begins with a dash (-), then the string must be enclosed in single or double quotes.

Print a usage message and exit

ttCacheAdvisor {{-help | -h} [option]}

Print the release number of ttCacheAdvisor and exit

ttCacheAdvisor {-V | -version}

Export a workload and schema definitions from the target Oracle database to files:

ttCacheAdvisor
[{-command|@} path]
{-oraTarget
-oraConn oracle_connection_string
-oraDirObject oracle_directory_object
[{-oraDirNfs| -ftp} network_connection_string]
} ...
-captureCursorCache minutes [-flushSharedPool]
-export [-zip] path
[-showSql]

Display a summary or details of existing tasks in the repository Oracle database:

ttCacheAdvisor  [{-command|@} path]  -oraRepository -oraConn oracle_connection_string
-showTask [task_name]
[-showSql]

Drop an existing task from the repository Oracle database:

ttCacheAdvisor   [{-command|@} path]  -oraRepository -oraConn oracle_connection_string
-dropTask task_name
[-showSql]

For more information about using Cache Advisor to capture and analyze a SQL workload running on a target Oracle database, see Oracle In-Memory Database Cache User's Guide.

Options

ttCacheAdvisor has the following options:

Option

Description

{-help | -h} [option]

Prints a usage message and exits.

-V | -version

Prints the release number of ttCacheAdvisor and exits.

-oraTarget

Specifies the target Oracle database (version 10.2.0.4 or later) to cache in a TimesTen database.
If either -oraTarget or -oraRepository is not specified, then the same Oracle database is used as the target and repository.

-oraRepository

Specifies the repository Oracle database (version 11.2.0.2 or later) used by ttCacheAdvisor to perform analysis of application workload and schema definitions.
If either -oraRepository or -oraTarget is not specified, then the same Oracle database is used as the repository and target.

-oraConnOracle_connection_string

Specifies the Oracle user and optional password, Oracle net service name, and any optional connection attributes. The standard format of an Oracle connection string is:
Oracle_user[/password]@Oracle_net_service_name

ttCacheAdvisor prompts for the password if it is omitted from the Oracle connection string.

If asterisk (*) is specified for the password, then ttCacheAdvisor assumes that automatic authorization on Oracle has been configured and will not prompt for the password.

No more than one connection to the repository Oracle database can be specified.

Multiple connections can be specified to the Oracle target database to analyze the schema definitions from multiple target schemas and to facilitate performance evaluation of SQL statements that were originally executed by different Oracle target users. To specify multiple connections to the Oracle target database, specify the -oraConn option multiple times after the -oraTarget option using different target Oracle users and the same target Oracle net service name.

ttCacheAdvisor uses the first -oraTarget -oraConn connection specified to capture the workload if -captureCursorCache is specified.

-oraDirObjectOracle_directory_object

Specifies an Oracle database directory object that ttCacheAdvisor uses to export and import workload and schema information to and from dump files using Data Pump. The directory object must reference a directory path in a local file system on the target Oracle database host when used with the -oraTarget option, and a directory path in a local file system on the repository Oracle database host when used with the -oraRepository option.

-oraDirNfs path

Specifies a network connection for transferring files between the target Oracle database system, repository Oracle database system, and TimesTen database system.
path is the directory path on the TimesTen system where ttCacheAdvisor is invoked that is network mounted to the directory path corresponding to the Oracle directory object specified by the -oraDirObject option.

-ftp network_connection_string

Specifies a network connection for transferring files between the target Oracle system, repository Oracle system, and TimesTen system.
network_connection_string is specified as [user_name][@host_name]. user_name defaults to the name of the operating system user that runs ttCacheAdvisor. host_name defaults to the Oracle target host name when used with the -oraTarget option, and the Oracle repository host name when used with the -oraRepository option. If anonymous ftp access has been provided, then no password is required. Otherwise, ftp prompts for a password whenever ttCacheAdvisor needs to access a host to copy a set of files to another host.

-ttConn TimesTen_connection_string

Specifies a TimesTen database for ttCacheAdvisor to use for cache validation and evaluation.
TimesTen_connection_string is a TimesTen connection string that contains at least the DSN attribute and the UID attribute. Set the UID attribute to the TimesTen cache manager user.

Example:

"DSN=ttca;UID=ttcacheuser"

ttCacheAdvisor prompts for the TimesTen cache manager user's password if the PWD attribute is omitted from the connection string. ttCacheAdvisor prompts for the Oracle cache administration user's password if the OraclePWD attribute is omitted from the connection string and the -evalSqlPerf option is specified.

ttIsql must be able to connect to the TimesTen database using a direct connection from the host where ttCacheAdvisor is invoked. The TimesTen database must be set up for use by Oracle IMDB Cache as described in the chapter "Using the Cache Advisor" of the Oracle In-Memory Database Cache User's Guide before invoking ttCacheAdvisor.

-captureCursorCache minutes

Specifies that ttCacheAdvisor capture a SQL workload from the Oracle cursor cache on the Oracle target database. The capture operation occurs as a series of snapshots and lasts for the specified number of minutes. Fractions of minutes can be specified using a decimal point value for minutes.
Oracle recommends a capture duration of at least 10 minutes to avoid having some SQL statements not being captured. However, it is best to run for a minimum of 20 minutes to analyze the workload.

-flushSharedPool

Flushes the shared pool on the target Oracle database before capturing a workload. Can only be specified with the -captureCursorCache option.
Use the -flushSharedPool option only with a test target database that may contain SQL statements in the cursor cache that are not associated with the application being analyzed. Do not use the -flushSharedPool option with a production target database.

-plsqlInfo

Augments the captured workload with information about the PL/SQL objects from which SQL statements originated. Can only be specified with the -captureCursorCache option.
The workload augmentation process may increase the load on the target database.

-cacheSize {{size{MB|GB|TB}} | UNLIMITED}

Specifies the maximum TimesTen database size in megabytes (MB), gigabytes (GB) or terabytes (TB). The default is UNLIMITED.
The value should be set to amount of the permanent memory available on the machine where you plan to deploy IMDB Cache.

-writethruThreshold percent%

Specifies a threshold of update or write operations, expressed as a percentage, including the % character as a suffix. If the percentage of update operations in the workload on a table or related set of tables is less than or equal to the specified threshold, then ttCacheAdvisor recommends a read-only cache group to cache the Oracle tables. Otherwise, ttCacheAdvisor recommends an asynchronous writethrough (AWT) cache group.
The default threshold is zero which means that ttCacheAdvisor recommends an AWT cache group if the workload contains at least one update operation on a table or related set of tables.

-report path

Specifies a directory on the TimesTen system where the ttCacheAdvisor recommendation report and implementation script is written to. The default is the task_name directory where ttCacheAdvisor was invoked.
The specified directory cannot exist as the ttCacheAdvisor utility creates the directory before writing files into it that constitute the report.

-evalSqlPerf [max[%]]

Specifies that ttCacheAdvisor compare the performance of the SQL workload statements in the TimesTen database with the target Oracle database. The -evalSqlPerf option should only be used on a test target database and not on a production target database.
You can specify a number or a percentage of SQL statements to evaluate. Include the % character for a percentage. The default is 100%.

If you limit the number of SQL statements to evaluate, then ttCacheAdvisor evaluates the SQL statements that appear to have the greatest potential for caching based on the captured workload and target schema statistics.

When using the -evalSqlPerf option, you must specify a direct connect DSN with the -ttConn option and not a client DSN.

-task task_name

Specifies a task name. The name can be up to 30 bytes in length and must be unique among ttCacheAdvisor tasks stored in the repository Oracle database. In other words, no task with the name task_name can exist prior to running the ttCacheAdvisor utility. Otherwise, the task must first be dropped using the -dropTask option.
A task is an object that contains information about the workload, performance results and ttCacheAdvisor options specified by the user.

Use the task name to run, rerun, show or drop the task. The default task name is user-name_host-name_timestamp, truncated to 30 bytes if necessary.

-description string

Specifies a description of the ttCacheAdvisor task. The description can be up to 4000 bytes in length.

-rerun

Specifies that ttCacheAdvisor rerun the current task. The -rerun option must be used in conjunction with the -task task_name option.

-showSql

Specifies that ttCacheAdvisor display the SQL statements it will execute on the TimesTen database, the target Oracle database and the repository Oracle database. ttCacheAdvisor prompts for continuation after displaying the statements.
Use this option to assess the impact of ttCacheAdvisor before incurring the impact.

-import [-noSchema] path

Specifies that ttCacheAdvisor import workloads and schemas that have previously been exported.
The -import option cannot be used in conjunction with the -captureCursorCache nor -flushSharedPool options.

Use -noSchema to import a workload without its schema. This option is useful when the target schema is already defined in the Oracle repository database.

path specifies the location of the exported workloads and schemas on the TimesTen system. The -import option first searches for a directory named path that contains the export files and then for a file named path.zip.

The -import option can be specified multiple times for the same ttCacheAdvisor execution to import multiple previously exported schemas or workloads.

If the workloads and schema were exported using the -zip option, then the unzip utility must be installed on the TimesTen system and be in the executable path.

{-add | -drop}

-add adds the specified item to the ttCacheAdvisor task.
-drop removes the specified item from the ttCacheAdvisor task. -drop is supported only with the -rerun option.

Use these options to add or drop cache group and cache table attributes, and workload options.

-tableAttrib [owner.]table_name

Specifies the cache group attributes and cache table attributes for ttCacheAdvisor to use for caching recommendations. The schema and table name can include a % wildcard character. When dropping an attribute, the schema and table name must match what was specified when they were added, including any wild card characters.
Using a wild card character for the schema or table name, you can specify an attribute to apply to more than one table. ttCacheAdvisor uses the first specified value for a specific table.

-pk '(column_name, ...)'

Specifies a primary key for the table. This overrides any primary key on the Oracle table.
'(column_name, ...)' is required when the -pk option is used with the -add option, and is optional when used with the -drop option.

-fk '(column_name, ...) REFERENCES (primary_key_column_name, ...) [ON DELETE CASCADE]'

Specifies a foreign key for the table. If the specified foreign key creates a cycle with an existing foreign key in the Oracle database, then ttCacheAdvisor uses the specified foreign key and not the existing foreign key.
'(column_name, ...) REFERENCES (primary_key_column_name, ...) [ON DELETE CASCADE]' is required when the -fk option is used with the -add option, and is optional when used with the -drop option.

-where '(predicate)'

Specifies a WHERE clause for the table if using a readonly cache group. Its value is ignored for an AWT cache group.
The format of predicate is any valid TimesTen WHERE clause that can be used in cache table definitions.

'(predicate)' is required when the -where option is used with the -add option, and is optional when used with the -drop option.

-sqlSet [owner.]sql_set_name

Specifies a SQL tuning set to add or drop from the ttCacheAdvisor task. When -add is specified, ttCacheAdvisor looks for the SQL tuning set first on the repository Oracle database and then on the target Oracle database. When -drop is specified, ttCacheAdvisor drops the SQL tuning set from the task. If the SQL tuning set was created or copied on behalf of the task, then ttCacheAdvisor also permanently drops the SQL tuning set from the repository database.

{-command|@} path

Specifies a file of ttCacheAdvisor commands. This option can be used anywhere on the command line that an option is allowed. Command files can be nested to any depth as long as they are not recursive. Blank lines and lines that start with the # comment delimiter are ignored in the files.

-export [-zip] path

Specifies that ttCacheAdvisor export the workload captured with the -captureCursorCache option.
The -export option cannot be used in conjunction with the -oraRepository, -ttConn, -report nor -task options.

The -zip option compresses the exported workload into a single zip file. The -zip option requires the zip utility to be installed on the TimesTen system and be in the executable path. path specifies the location on the TimesTen system for the export files.

If the -zip option is specified, then ttCacheAdvisor creates a single compressed file with the .zip file extension whose name is the last string of path. If the -zip option is not specified, then ttCacheAdvisor writes the export files to the path directory. The prefix of the names of all files created by the -export option is the last string of path.

-showTask [task_name]

Displays information about the specified task or all tasks. If task_name is not specified, then summary information is displayed about all tasks stored in the repository Oracle database. If task_name is specified, then detailed information is displayed about the specified task.

-dropTask task_name

Drops the specified task, including SQL tuning sets created or copied on behalf of the task that are not being used by any other tasks.

Examples

Use ftp as the network connection to transfer files between the target Oracle system, repository Oracle system, and TimesTen system. Capture a SQL workaround on the target database for a duration of 30 minutes. Flush the shared pool on the target database before capturing the workload.

% ttCacheAdvisor -oraTarget -oraConn orauser@targetdb \
-oraDirObject targetdir -ftp targetuser@targethost \
-oraRepository -oraConn ttcacheadvisor@repositorydb \
-oraDirObject repositorydir -ftp repositoryuser@repositoryhost \
-ttConn "DSN=cacheadvisor;UID=cacheuser" \
-captureCursorCache 30 -flushSharedPool -task testtask

Use NFS as the network connection to transfer files between the target Oracle system, repository Oracle system, and TimesTen system. Capture a SQL workaround on the target database for a duration of 15 minutes. Evaluate the performance of all SQL statements executed in the TimesTen database and in the target database. Write the HTML report files to the /home/ttuser/cacheadvreport directory.

% ttCacheAdvisor -oraTarget -oraConn orauser@targetdb \
-oraDirObject targetdir -oraDirNfs /home/ttuser/targetdir \
-oraRepository -oraConn ttcacheadvisor@repositorydb \
-oraDirObject repositorydir -oraDirNfs /home/ttuser/repositorydir \
-ttConn "DSN=cacheadvisor;UID=cacheuser" \
-report /home/ttuser/cacheadvreport -captureCursorCache 15 -evalSqlPerf

Use NFS as the network connection to transfer files between the target Oracle system, repository Oracle system, and TimesTen system. Capture a SQL workaround on the target database for a duration of 10 minutes. Flush the shared pool on the target database before capturing the workload. Export the captured workload into a single file named cacheadvcapture.zip written to the /home/ttuser directory.

% ttCacheAdvisor -oraTarget -oraConn orauser@targetdb \
-oraDirObject targetdir -oraDirNfs /home/ttuser/targetdir \
-captureCursorCache 10 -flushSharedPool -export -zip /home/ttuser/cacheadvcapture

Use NFS as the network connection to transfer files between the target Oracle system, repository Oracle system, and TimesTen system. Import and analyze the SQL workaround from the /home/ttuser/cacheadvcapture.zip file. Write the HTML report files to the /home/ttuser/cacheadvreport directory.

% ttCacheAdvisor -oraTarget -oraConn orauser@targetdb \
-oraDirObject targetdir -oraDirNfs /home/ttuser/targetdir \
-oraRepository -oraConn ttcacheadvisor@repositorydb \
-oraDirObject repositorydir -oraDirNfs /home/ttuser/repositorydir \
-ttConn "DSN=cacheadvisor;UID=cacheuser" \
-report /home/ttuser/cacheadvreport -task temptask \
-import /home/ttuser/cacheadvcapture

ttCapture

Description

Captures information about the state of TimesTen at the time the command is used. This information may be useful in diagnosing problems. Sometimes TimesTen Customer Support must make repeated incremental requests for information to diagnose a customer's problem in the field.

The information captured by this utility may be requested by TimesTen Customer Support and may be sent with your support email.

The utility does not interpret errors. It only collects information about the state of things and sends output to the ttcapture.date.number.log file in the directory from which you invoke the ttCapture utility. This utility collects general information that is usually relevant to support cases.

Note:
Directory and file names should always be double-quoted in case there are spaces in them.

Required privilege

This utility requires the instance administrator privilege.

If authentication information is not supplied in the connection string or DSN, this utility prompts for a user ID and password before continuing.

Syntax

ttCapture {-h | -help | -?}
ttCapture {-V | -version}
ttCapture [-noinstinfo] [-nosysinfo] [-stdout | -dest dir] [-logdir dir]
[dspath | DSN]

Options

ttCapture has the options:

Option

Description

-dest dir

Writes the output file to the designated directory.

DSN

Specifies an ODBC data source name of the database to be checked.

dspath

The fully qualified name of the database to be evaluated. This is not the DSN associated with the connection but the fully qualified database path name associated with the database as specified in the DataStore= parameter of the database's ODBC definition.
For example, for a database consisting of files/home/payroll/2011.ds0, /home/payroll/2011.ds1, and several transaction log files /home/payroll/2011.logn, dspath is /home/payroll/2011.

NOTE: The DSN and dspath options are mutually exclusive. If you do not supply either option, ttCapture does not provide any database information.

-h
-help

-?

Prints a usage message and exits.

-logdir dir

Specifies the location of the log directory. Must be used with the -dsname option. If not specified, the log directory may not be available.

-noinstinfo

Do not capture any installation information.

-nosysinfo

Do not capture any system information.

-stdout

On UNIX systems, writes all output to stdout, instead of writing the output to a file.

-V | -version

Prints the release number of ttCapture and exits.

Examples

To capture data on the test_db database and write the database checkpoint files to the directory D:\my_data\recover\test_db, use:

ttCapture -dest "D:\my_data\recover\test_db" test_db

Note

This utility is supported only where the TimesTen Data Manager is installed.

ttCheck

Description

Performs internal consistency checking within a TimesTen database. You can specify a specific structure to be checked and a desired level of checking.

Required privilege

This utility requires the ADMIN privilege.

If authentication information is not supplied in the connection string or DSN, this utility prompts for a user ID and password before continuing.

Syntax

ttCheck {-h | -help | -?}
ttCheck {-V | -version}
ttCheck [ [-blkDir] [-compHeap] [-header] [-heap] [-indexHeap] [-log]
[-permBlkDir] [-permHeap] [-tempBlkDir] [-tmpHeap]
[-tables tblName [...]] [-users userName [...]]
[-level levelNum] ] [...]
[-m maxErrors] [-f outFile] [-v verbosity]
{DSN | [-connstr] connection_string | dspath}

Options

ttCheck has the options:

Option

Description

-blkDir

Checks all the block directories.

-compHeap

Checks the compilation heap structure.

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Specifies an ODBC data source name of the database to be checked.

dspath

The fully qualified name of the database to be checked. This is not the DSN associated with the connection. It is the fully qualified database path name associated with the database as specified in the DataStore= parameter connection attribute in the database's DSN.
For example, for a database consisting of files/home/payroll/2011.ds0, /home/payroll/2011.ds1, and several transaction log files /home/payroll/2011.logn,dspath is/home/payroll/2011.

-f outFile

Specifies the output file name; defaults to stdout.

-h
-help

-?

Prints a usage message and exits.

-header

Checks the content of the database header.

-heap

Checks all heap structures.

-indexHeap

Checks the index heap structure.

-level levelNum

Can be used to indicate the level of checking for header, block directory, heap and table. Different structures can be checked using different levels in a same command. A level specification is applied to all structures specified to its left in the command string that do not have a level specification. A level specification is applied to all structures if no structure is specified in the command string.
1 - Checks sanity bytes and simple fields. For example, counts enums for validity in all high-level structures.

2 - Does all checks in level 1, plus checks the validity of structures, referenced by fields in other structures.

3 - Does all checks in level 2, plus checks each table row for column values. For example, checks valid VARCHAR2 and FLOAT sizes.

4 (default) - Does all checks in level 3, plus checks index/table mapping for each row and each index.

-log

Checks the log buffer.

-m maxErrors

Maximum number of errors to report. Default is 10; a few extra related errors may be reported. If 0, the utility only connects, then returns.

-permBlkDir

Checks the permanent partition block directory.

-permHeap

Checks the permanent heap structure.

-tables tblName [...]

Checks table(s) specified by tblName.

-tempBlkDir

Checks the temporary partition block directory.

-tmpHeap

Checks the temporary heap structure.

-users userName [...]

Checks tables belonging to the user(s) specified by userName.

-V | -version

Prints the release number of ttCheck and exits.

-v verbosity

0 - No output (program's exit status indicates if an error was found).
1 (default) - Enable error output only.

2 - Error output and a progress report.

Examples

To perform a check of all structures in the test_db database, use:

ttCheck test_db

To perform a sanity check of all structures in the test_db database, use:

ttCheck -level 1 test_db

To perform a check of all tables in the test_db database, use:

ttCheck -tables test_db

To check the physical structures and row contents of all tables in the test_db database, use:

ttCheck -tables -level 3 test_db

To perform a sanity check of all heap structures, row contents and indexes of all tables in the test_db database, use the following.

ttCheck -heap -level 1 -tables -level 4 test_db

To check the physical structures and row contents of tables tab1 and tab2 in the test_db database, use:

ttCheck -tables tab1 tab2 -level 3 test_db

Notes

While primarily intended for use by TimesTen customer support to diagnose problems with internal data structures of a TimesTen database, the information returned by ttCheck may be useful to system administrators and developers.

The ttCheck utility should be run when there are no active transactions on the system. If run on a shared database and other transactions are active, ttCheck may return errors when the database is in fact intact.

The ttCheck utility checks views in the same manner as other tables in a database. The utility cannot verify that the contents of a view matches view query's result.

If no structures are specified, ttCheck checks all structures. No errors are returned if a specified table's name or user is not found.

This utility may take some time to run. Verbosity level 2 allows you to print a progress report.

This utility is supported only where the TimesTen Data Manager is installed.

ttCWAdmin

Description

Manages TimesTen active standby pairs that take advantage of the high availability framework of Oracle Clusterware. This utility starts administrative processes, generates scripts and performs other functions to administer active standby pairs and the corresponding Clusterware resources.

For more information about using Oracle Clusterware to manage TimesTen active standby pairs, see Oracle TimesTen In-Memory Database Replication Guide.

These commands are available only with advanced high availability:

- ttCWAdmin -addMasterHosts

- ttCWAdmin -addSubscriberHosts

- ttCWAdmin -createVIPs

- ttCWAdmin -delMasterHosts

- ttCWAdmin -delSubscriberHosts

- ttCWAdmin -dropVIPs

These commands fail with basic high availability.

Required privilege

On Windows 2008, a user with Administrators privileges can execute all commands as Administrator. On other supported Windows platforms, any user that has Administrator privileges can execute all commands in this utility.

On UNIX, the root user can execute all commands in this utility. These commands must be executed by the root user:

- ttCWAdmin -addMasterHosts

- ttCWAdmin -addSubscriberHosts

- ttCWAdmin -createVIPs

- ttCWAdmin -delMasterHosts

- ttCWAdmin -delSubscriberHosts

- ttCWAdmin -ocrConfig

- ttCWAdmin -dropVIPs

The admin user can execute all other commands in this utility.

If authentication information is not supplied in the connection string or DSN, this utility prompts for a user ID and password before continuing.

Syntax

ttCWAdmin {-h | -help | -?}

ttCWAdmin {-V | -version}

ttCWAdmin -init [-hosts "host_name1, host_name2[, ...]"]

ttCWAdmin {-createVIPs | -dropVIPs | -create | -drop | -restore | -start |
-stop | -status} [-ttclusterini path] [-dsn DSN]

ttCWAdmin -switch -dsn DSN

ttCWAdmin -relocate -dsn DSN

ttCWAdmin -ocrConfig

ttCWAdmin -beginAlterSchema -dsn DSN

ttCWAdmin -endAlterSchema -dsn DSN

ttCWAdmin -addMasterHosts [-hosts "host_name1, host_name2[, ...]"] -dsn DSN

ttCWAdmin -delMasterHosts [-hosts "host_name1, host_name2[, ...]"] -dsn DSN

ttCWAdmin -addSubscriberHosts [-hosts "host_name1, host_name2[, ...]"] -dsn DSN

ttCWAdmin -delSubscriberHosts [-hosts "host_name1, host_name2[, ...]"] -dsn DSN

ttCWAdmin -shutdown [-hosts "host_name1, host_name2[, ...]"]

Options

ttCWAdmin has these general options:

Option

Description

-addMasterHosts

Adds spare hosts to the pool of master hosts dynamically, when high availability is employed. On the command line, separate multiple host names by commas.
On UNIX systems, only the root user can execute this command.

-addSubscriberHosts

Adds spare hosts to the pool of subscriber hosts dynamically, when high availability is employed. On the command line, separate multiple host names by commas.
On UNIX systems, only the root user can execute this command.

-beginAlterSchema

Allows manual alteration, addition or dropping of cache groups to the active standby pair replication scheme when automatic include of new schema objects in the active standby pair scheme is not possible. Also, allows creation of PL/SQL procedures, sequences materialized views and indexes on tables with data. Allows addition of a read-only subscriber that is not managed by Oracle Clusterware. While adding objects to the schema, the active standby pair is brought down, but the active node stays attached if you are using grid.

-create

Creates the active standby pair replication scheme for the specified DSN and creates the associated action scripts.
This command prompts for the user ID and password for an internal user with the ADMIN privilege if it does not find this information in the sys.odbc.ini file. This command also prompts for a passphrase for the encryption of stored authentication information.

This internal user is used to create the active standby pair. If the attribute CacheConnect=Y in the cluster.oracle.ini, the command also prompts for the user password for the Oracle database. The Oracle password is used to set the autorefresh states for cache groups.

-createVIPs

Creates virtual IP addresses for the active standby pair. If no DSN is specified, displays the information of all active standby pairs managed under the same TimesTen instance administrator and TimesTen instance name managed by Clusterware.

-delMasterHosts

Deletes spare hosts to the pool of master hosts dynamically, when high availability is employed. On the command line, separate multiple host names by commas.
The command fails if the indicated hosts are not spare hosts.

On UNIX systems, only the root user can execute this command.

-delSubscriberHosts

Deletes spare hosts to the pool of subscriber hosts dynamically, when high availability is employed. On the command line, separate multiple host names by commas.
The command fails if the indicated hosts are not spare hosts.

On UNIX systems, only the root user can execute this command.

-drop

Drops the active standby pair replication scheme and deletes its action scripts.

-dropVIPs

Drops the virtual IP addresses for the active standby pair.

-endAlterSchema

Issued after an operation using the -beginAlterSchema option. Rolls out the active standby pair after objects have been added to the schema, while recording the new replication checksum.

-h
-help

-?

Prints a usage message and exits.

-init

Starts the TimesTen cluster agent.

-ocrConfig

TimesTen cluster information is stored in the Oracle Cluster Registry (OCR). This option registers the admin user in the OCR. You must register the admin user once before performing any of the cluster initialization steps.
On UNIX and Linux systems, login as the root user and run this command from any host in the system before creating any clusters.

On Windows systems, login as the instance administrator to run this command.

You do not need to perform this step when starting an existing cluster that you have shutdown.

-relocate

Relocates the database from the local host to the next available spare host specified in the MasterHosts attribute in the cluster.oracle.ini configuration file. If no spare host is available, an error is returned.
If the database on the local host is active, roles are first reversed so that the remote standby store of the same cluster becomes active. The newly migrated database on the spare host always comes up as the standby database.This is useful to forcefully relocate a database if you must take the host offline, when high availability is employed. This command fails when basic High Availability (HA) is deployed for the same cluster.

-restore

Restores the active master database from the backup specified by RepBackupDir. Do not use this command when AutoRecover is enabled.

-shutdown

Stops the TimesTen cluster agent.

-start

Starts the active standby pair.

-status

Obtains the status of resources in the cluster.

-stop

Stops the replication agent and the cache agent and disconnects the application from both databases of an active standby pair. Also automatically detaches a grid member from a cache grid that is managed by Oracle Clusterware.

-switch

Reverses the role of an active standby pair in a cluster. The standby database becomes the new active, while the existing active database becomes the standby database.

-dsn DSN

Specifies the DSN for the active standby pair.

-hosts "host_name1, host_name2[, ...]"

Specifies the hosts on which to start or shut down the TimesTen cluster agent. If this option is not specified, the TimesTen cluster agent is started or stopped on all hosts.

-ttclusterini path

Specifies the full path name of the cluster.oracle.ini file. The default location is in the daemon home directory. The default location is recommended.

-V | -version

Prints the release number of ttCWAdmin and exits.

Examples

To create and start an active standby pair managed by Oracle Clusterware, using the clusterDSN DSN, enter:

ttCWAdmin -create -dsn clusterDSN
ttCWAdmin -start -dsn clusterDSN

To stop and drop an active standby pair managed by Oracle Clusterware, using the clusterDSN DSN, enter:

ttCWAdmin -stop -dsn clusterDSN
ttCWAdmin -drop -dsn clusterDSN

Notes

When you use Oracle Clusterware with TimesTen, you cannot use these commands and SQL statements:

- CREATE ACTIVE STANDBY PAIR, ALTER ACTIVE STANDBY PAIR and DROP ACTIVE STANDBY PAIR SQL statements.

- The -cacheStart and -cacheStop options of the ttAdmin utility after the active standby pair has been created.

- The -duplicate option of the ttRepAdmin utility.

- The ttRepStart and ttRepStop built-in procedures.

- Built-in procedures for managing a cache grid when the active standby pair in a cluster is a member of a grid.

- The -repStart and -repStop options of the ttAdmin utility.

In addition, do not call ttDaemonAdmin -stop before calling ttCWAdmin -shutdown.

The TimesTen integration with Oracle Clusterware accomplishes these operations with the ttCWAdmin utility and the attributes in the cluster.oracle.ini file.

ttDaemonAdmin

Description

Starts and stops the TimesTen main daemon and Server.

Required privilege

This utility requires the instance administrator privilege.

Syntax

ttDaemonAdmin {-h | -help | -?}
ttDaemonAdmin {-V | -version}
ttDaemonAdmin [-force] {-start | -stop | -restart}
ttDaemonAdmin [-startserver | -restartserver]
ttDaemonAdmin [-force] -stopserver

Options

ttDaemonAdmin has the options:

Option

Description

-h
-help

-?

Prints a usage message and exits.

-force

Starts or stops the TimesTen main daemon, even when warnings are returned or with -stopserver immediately stops the server processes.

-restart

Restarts the TimesTen main daemon.

-restartserver

Restarts the TimesTen Server.

-start

Starts the TimesTen main daemon.

-startserver

Starts the TimesTen Server daemon.

-stop

Stops the TimesTen main daemon.

-stopserver

Stops the TimesTen Server daemon.
Without the -force option, client/server connections to TimesTen databases are gracefully disconnected after completing any request they may be processing, and then the server exits.

With the -force option, client/server connections to TimesTen databases are forcefully and immediately terminated, and then the server exits.

-V | -version

Prints the release number of ttDaemonAdmin and exits.

Notes

Changes to the TimesTen Server options are temporary. To permanently set or disable the TimesTen Server options, you must change the options in the ttendaemon.options file.

The -force option should be used with caution, as it may leave databases in a state where you must perform recovery procedures.

When you use this utility on Windows Vista, you must be running with Windows Administrative privileges.When you stop the daemon (ttDaemonAdmin -stop), first stop all application connections to the database. This includes stopping the replication agent and the cache agent, if they are running. This decreases startup time when the daemon is restarted. In addition, not stopping application connections or agents can result in the database becoming in validated.

If the CRS agent is running, you must stop it on the local host before stopping the TimesTen main daemon (ttDaemonAdmin -stop). If you do not stop the CRS agent, the main daemon stops temporarily with this command, but then restarts. To stop the CRS agent, use:

ttcwadmin -shutdown -hosts localhost

When you use this utility to restart the server, the TimesTen daemon reads the ttendaemon.options files to see if it has been changed since it was last read. If the file has been changed, TimesTen checks for the values of the options:

-server -serverShmIpc -serverShmSize -noserverlog

See also

For a description of all daemon options and instructions for changing the ttendaemon.options file, see "Managing TimesTen daemon options" in Oracle TimesTen In-Memory Database Operations Guide.

ttDaemonLog

Description

TimesTen uses a TimesTen daemon (referred to as the TimesTen Data Manager Service on Windows) and other background processes, known as subdaemons and agents, to manage access to the either the "user" or "error" log.

By default, TimesTen messages are stored in:

- A user error log that contains information you may need to see. Generally, these messages contain information on actions you may need to take.

- A support log containing everything in the user error log plus information of use by TimesTen Customer Support.

The ttDaemonLog utility allows you to control the type of events that are written to and fetched from the TimesTen user and error logs.

There are two versions of the ttDaemonLog utility:

- ttDaemonLog for Windows

- ttDaemonLog for UNIX

Required privilege

This utility requires the instance administrator privilege.

ttDaemonLog for Windows

On Windows, TimesTen user and error log messages are written to the Windows Application Event Log. The ttDaemonLog utility controls which events are written to and fetched from the log and displayed to stdout.

Syntax

ttDaemonLog {-h | -help | -?}
ttDaemonLog {-V | -version}
ttdaemonlog [-show type] [-b | -r | -s] [-f] [-maxlines]
[-loglevel level [DSN | [-connstr] connStr]]
[-[no]logcomponent component [DSN | [-connstr] connStr]]
[-logreset] [-msg messagestring] [-setquiet | -setverbose]
[-n computer]

Options

ttDaemonLog has the options:

Option

Description

-b

Prints all TimesTen-generated syslog entries.

-f

When the end of the log is reached, ttDaemonLog does not terminate but continues to execute, periodically polling the event log to retrieve and display additional TimesTen log records. This is useful, for example, for generating a display of log data that is updated in real time.

-h
-help

-?

Prints a usage message and exits.

-maxlines

Maximum number of lines at end of log to display. Defaults to 40 lines if -f is specified. If 0, no limit is set.

-logcomponent component
-nologcomponent

Specifies that the given component should be logged.
If a DSN or connection string is specified as the component, logging applies only to the specified database.

If -nologcomponent is specified, no logging is done for the indicated component. Legal values for component are:

ALL

CACHE

DAEMON

DAEMONDBG

REPLICATION

SERVER

-loglevel level

Specifies that messages of level greater than or equal to the specified level should be logged. If a DSN or connection string is specified as the component, the option applies only to the specified database.

-logreset

Resets event logging parameters.

-msg messagestring

Insert string into the TimesTen user log.

-n computer

Displays the log from a different computer.
Specify the Universal Naming Convention (UNC) name of the target computer.

-r

Print only the TimesTen Replication Agent log. (Same as -show replication.)

-s

Print only the TimesTen Server log. (Same as -show server.)

-setverbose
-setquiet

Enable (-setverbose) or disable (-setquiet) TimesTen verbose logging.

-show type

Limits output to the given type. Types are:
:all (default) - Shows all.

replication - Shows only log entries for replication agents. (Same as -r option.)

ora - Shows only log entries for cache agents.

server - Shows only log entries for TimesTen Server. (Same as -s option.)

-V | -version

Prints the release number of ttDaemonLog and exits.

Examples

By default, the ttDaemonLog utility logs messages and errors from all the TimesTen components. You can narrow the scope of what is written to the log by setting the -nologcomponent option. The -nologcomponent option can be applied to selected databases or all databases.

For example, to prevent messages and errors related to replication for all databases from being written to the log, enter:

ttDaemonLog -nologcomponent replication

To prevent messages and errors related to replication for the masterdsn database from being written to the log, enter:

ttDaemonLog -nologcomponent replication masterdsn

If, you want to prevent both replication and IMDB Cache errors and messages from being written, enter:

ttDaemonLog -nologcomponent replication
ttDaemonLog -nologcomponent cache

If, after setting a -nologcomponent option, you want to re-enable writing errors for a component, you can use the -logcomponent option. For example, if after preventing both replication and IMDB Cache errors from being logged, as shown in the example above, you want to re-enable logging of replication errors, enter:

ttDaemonLog -logcomponent replication

To re-enable logging for all TimesTen components, you can use the -logreset option:

ttDaemonLog -logreset

To display all the output from the TimesTen daemon and server on your local computer, use:

ttDaemonLog

To display the log output from the host computer named, backup1, use:

ttDaemonLog -n backup1

To write the log output to the file C:\TimesTen\logout\log1, use:

ttDaemonLog -file C:\TimesTen\logout\log1

The TimesTen Server generates a message each time an application connects to or disconnects from a client DSN if these messages were specified to be generated during installation. To display just the server log messages, use:

ttDaemonLog -show server

To display just the replication agent messages, use:

ttDaemonLog -show replication

To display just the cache agent messages, use:

ttDaemonLog -show ora

To display all messages from the TimesTen processes, use:

ttDaemonLog -show all

To restore logging to its default "verbose" level, use the -setverbose option:

ttDaemonLog -setverbose

Notes

While primarily intended for use by TimesTen customer support, this information may be useful to system administrators and developers.

This utility is supported only where the TimesTen Data Manager is installed.

To permanently set or disable verbose logging, you must change the options in the ttendaemon.options file. See "Modifying informational messages" in the Oracle TimesTen In-Memory Database Operations Guide.

ttDaemonLog for UNIX

Description

On UNIX, ttDaemonLog fetches all TimesTen events from the file generated by syslogd(1). It displays all events to stdout.

The TimesTen daemon (timestend) records its event log via syslog(2). The eventual disposition of the log information depends on the configuration of your /etc/syslog.conf file, which you can customize to log or ignore messages selectively. Messages can be logged into various files depending on the configuration of the file. These files can grow to be quite large. You should prune them periodically to conserve disk space.

Syntax

ttDaemonLog {-h | -help | -?}
ttDaemonLog {-V | -version}
ttDaemonLog [-show type] [-b | -r | -s] [-f] [-integer] [-file filename]
[-facility name] [-loglevel level [DSN | [-connstr] connStr]] [-[no]logcomponent
component [DSN | [-connstr] connStr]] [-logreset] [-msg string] [-setquiet |
-setverbose]

Options

ttDaemonLog has the options:

Option

Description

-b

Prints all TimesTen generated syslog entries.

-f

When the end of the log is reached, ttDaemonLog does not terminate but continues to execute, periodically polling the event log to retrieve and display additional TimesTen log records. This is useful, for example, for generating a display of log data that is updated in real time.

-facility name

Specifies the syslog facility name being used.

-file filename

Specifies the file into which TimesTen is logging messages.
If not specified, examine the system's syslog configuration to determine where TimesTen messages are being logged.

-h
-help

-?

Prints a usage message and exits.

-integer

Maximum number of lines at end of log to display. Defaults to 40 lines if -f is specified. If 0, no limit is set.

-logcomponent component
-nologcomponent

Specifies that the given component should be logged, along with any other components that are already being logged.
If a DSN or connection string is specified as the component, logging applies only to the specified database.

If -nologcomponent is specified, no logging is done for the indicated component.Legal values for component are:

ALL

CACHE

DAEMON

DAEMONDBG

REPLICATION

-loglevel level

Specifies that messages of level greater than or equal to the specified level should be logged. If a DSN or connection string is specified as the component, the option applies only to the specified database.

-logreset

Resets event logging parameters.

-msg string

Insert string into the TimesTen user log.

-r

Print only the TimesTen Replication Agent log. (Same as -show replication.)

-s

Prints the TimesTen Server log. (Same as -show server.)

-setverbose
-setquiet

Enable (-setverbose) or disable (-setquiet) TimesTen verbose logging.

-show type

Limits output to the given type. Types are:
:all (default) - Shows all.

replication - Shows only log entries for replication agents. (Same as -r option.)

ora - Shows only log entries for cache agents.

server - Shows only log entries for TimesTen Server. (Same as -s option.)

-V | -version

Prints the release number of ttDaemonLog and exits.

Examples

Except for the example with the -n option, all the examples shown under "ttDaemonLog for Windows" also apply to the UNIX version of ttDaemonLog. The following examples, show the use of some of the UNIX-specific options.

To write the log output to the file /var/adm/syslog/syslog.log, use:

ttDaemonLog -file /var/adm/syslog/syslog.log

To direct logging to the local7 facility, use.

ttDaemonLog -facility local7

Notes

While primarily intended for use by TimesTen customer support, this information may be useful to system administrators and developers.

This utility is supported only where the TimesTen Data Manager is installed.

To permanently set or disable verbose logging, you must change the options in the ttendaemon.options file. For information on this file and on configuring sys.log, see "Modifying informational messages" in the Oracle TimesTen In-Memory Database Operations Guide.

ttDestroy

Description

Destroys a database including all checkpoint files, transaction logs and daemon catalog entries (though not the DSNs).

Required privilege

This utility requires the instance administrator privilege.

Syntax

ttDestroy {-h | -help | -?}
ttDestroy {-V | -version}
ttDestroy [[-wait] [-timeout secs]] [-force] {-connStr connection_string |
DSN | dspath}

Options

ttDestroy has the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Specifies an ODBC data source name of the database to be destroyed.

dspath

The fully qualified name of the database to be destroyed.
This is not the DSN associated with the connection but the fully qualified database path name associated with the database as specified in the DataStore= parameter of the database's ODBC definition.

For example, for a database consisting of files/home/payroll/2011.ds0, /home/payroll/2011.ds1, and several transaction log files /home/payroll/2011.logn,dspath is /home/payroll/2011.

-h
-help

-?

Prints a usage message and exits.

-force

Destroy even if files are from an incompatible version or a different instance of TimesTen.

-timeout seconds

Indicates the time in seconds that ttDestroy should wait. If no timeout value is supplied, TimesTen waits five seconds before retrying the destroy operation.

-V | -version

Prints the release number of ttDestroy and exits.

-wait

Causes ttDestroy to continually retry the destroy operation until it is successful, in those situations where the destroy fails due to some temporary condition, such as when the database is in use.

Example

ttDestroy /users/pat/TimesTen/Daily/F112697

Notes

Using ttDestroy is the only way to delete a database completely and safely. Do not remove database checkpoint or transaction log files manually.

This utility is supported only where the TimesTen Data Manager is installed.

In the case that the database to be destroyed is part of a cache grid, ttDestroy performs a detaches the database from the grid.

ttDestroy does not perform cleanup of Oracle objects from autorefresh or AWT cache groups. If there are autorefresh or AWT cache groups in the database, execute the cachecleanup.sql script to clean up the cache objects in Oracle for that particular database, to generate Oracle SQL to perform cleanup after the database has been destroyed.

ttIsql

Description

You can execute SQL statements and call TimesTen built-in procedures from ttIsql. You can execute SQL interactively from the command line. For a detailed description on running SQL from ttIsql, use the -helpfull option. In addition, you can call a TimesTen built-in procedure with call procedure-name.

The ttIsql command attempts to cancel an ongoing ODBC function when the user presses Ctrl-C.

On UNIX, this utility is supported for TimesTen Data Manager DSNs. Use ttIsqlCS for client/server DSNs.

The ttIsql utility starts with AUTOCOMMIT turned on, even when running a script. You can turn AUTOCOMMIT off and back on as necessary.

For more details on the ttIsql utility, see the chapter "Using the ttIsql Utility" in the Oracle TimesTen In-Memory Database Operations Guide

Required privilege

This utility requires no privileges.

Syntax

ttIsql {-h | -help | -? | -helpcmds | - helpfull}
ttIsql {-V | -version}
ttIsql [-f inputFile] [-v verbosity] [-e commands | sql_statement]
[-interactive] [-N ncharEncoding] [-wait] {-connStr connection_string | DSN}

Options

ttIsql has the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Specifies an ODBC data source name of the database to be connected.

-e commands

Specifies a semi-colon separated list of ttIsql commands to execute on start up.

-f filename

Read SQL statements from filename.

-h
-help

-?

Prints a usage message and exits.

-helpcmds

Prints a short list of the interactive commands.

-helpfull

Prints a full description of the interactive commands.

-interactive

Forces interactive mode. This is useful when running from an emacs comint buffer.

-N ncharEncoding

Specifies the character encoding method for NCHAR output.
Valid values are LOCALE or ASCII. LOCALE (the default) sets the output format to the locale-based setting.

If no value is specified, TimesTen uses the system's native language characters.

-V | -version

Prints the release number of ttIsql and exits.

-v verbosity

Specifies the verbosity level. One of:
0 - Shows error information only. If all commands succeed, there is no output.

1 - The basic output generated by commands is displayed.

2 (default) - Same as level 1, plus it shows more detailed results of commands.At this level simplified SQL error and information messages are displayed. In addition, ttIsql commands that are read from an external file are echoed to the display.

3 - Same as level 2, with more detailed error and information messages.

4 - Same as level 3, plus complete error and information messages are displayed. Also displayed are messages about prepared commands, "success" messages for each command that succeeded and content of XLA records.

-wait

Waits until successful connect.

Commands

Also see the list of ttIsql "Set/show attributes".

Boolean commands can accept the values "ON" and "OFF" in place of "1" and "0".

ttIsql has the commands:

Command

Description

accept variable[NUM[BER]| CHAR |BINARY_FLOAT | BINARY_DOUBLE] [DEF[AULT]default_value] [PROMPT prompt_text | NOPR[OMPT]] [HIDE]

Gets input from a user and DEFINES the variable. If a type is specified then it will be validated for that type. The default (enclosed in quotes) will be assigned if the user just presses enter. The prompt will be displayed before waiting for input (or can be suppressed). The HIDE option stops the terminal from displaying the entered text (for passwords).
The prompt is displayed before waiting for input, if specified without the HIDE option. The HIDE option stops the terminal from displaying the entered text.

allfunctions [[owner_name_pattern.]table_name_pattern]

Lists, in a single column, the names of all the PL/SQL functions that match the given pattern selected from SYS.ALL_OBJECTS. When a pattern is missing, the pattern defaults to "%".
If passthrough is enabled, lists PL/SQL functions matching the pattern in the Oracle database.

See the functions command.

allindexes [[owner_name_pattern.]table_name_pattern]

Describes the indexes that it finds on the tables that match the input pattern selected from SYS.ALL_OBJECTS. When a pattern is missing, the patterns default to "%".
If passthrough is enabled, lists indexes on tables matching the pattern in the Oracle database.

See the indexes command.

allpackages [[owner_name_pattern.]table_name_pattern]

Lists, in a single column, the names of all the PL/SQL packages that match the given pattern selected from SYS.ALL_OBJECTS. When a pattern is missing, the patterns default to "%".
If passthrough is enabled, lists PL/SQL packages matching the pattern in the Oracle database.

See the packages command.

allprocedures [[owner_name_pattern.]procedure_name_ pattern]

Lists, in a single column, the names of all the PL/SQL procedures that match the given pattern selected from SYS.ALL_OBJECTS. When a pattern is missing, the pattern defaults to "%".
If passthrough is enabled, lists PL/SQL procedures matching the pattern in the Oracle database.

See the procedures command.

allsequences [[owner_name_pattern.]table_name_pattern]]

Lists, in a single column, the names of all the sequences that match the given pattern selected from SYS.ALL_OBJECTS. When a pattern is missing, the pattern defaults to "%".
If passthrough is enabled, lists sequences on tables matching the pattern in the Oracle database.

See the sequences command.

allsynonyms [[schema_pattern.]object_pattern]]

Lists, in a single column, the names of all synonyms that match the given pattern. When a pattern is missing, the pattern defaults to "%".
If passthrough is enabled, lists synonyms on tables matching the pattern in the Oracle database.

See the synonyms command.

alltables [[owner_name_pattern.]table_name_pattern]]

Lists, in a single column, the names of all the tables that match the given pattern selected from SYS.ALL_OBJECTS. When a pattern is missing, the pattern defaults to "%".
If passthrough is enabled, lists tables matching the pattern in the Oracle database.

See the tables command.

allviews [[owner_name_pattern.]view_name_pattern]]

Lists, in a single column, the names of all the views that match the specified pattern selected from SYS.ALL_OBJECTS. When a pattern is missing, the pattern defaults to "%".
If passthrough is enabled, lists views matching the pattern in the Oracle database.

See the waitfor command.

builtins [builtin_name_ pattern]

Lists, in a single column, the names of all the TimesTen built-in procedures that match the given pattern. When the pattern is missing, the pattern defaults to "%".
See the procedures command.

bye
exit

Exits ttIsql.

cachegroups [[cache_group_owner_pattern.cache_group_name_pattern]]

Reports information on cache groups defined in the currently connected data source, including the state of any terminated databases that contain autorefresh cache groups.
If the optional argument is not specified then information on all cache groups in the current data source is reported.

clearhistory

Clears the history buffer. Also see history and savehistory.

clienttimeout
[timeeout seconds]

Sets the client timeout value in seconds for the current connection. If no value is specified, displays the current value.

cachesqlget
[ASYNCONOUS_WRITETOUGH | INCREMENTAL_AUTOREFRESH] [[cache_group_owner.]cache_group_name] {INSTALL | UNINSTALL} [filename]

Generates an Oracle SQL*Plus compatible script for the installation or uninstallation of Oracle objects associated with a a read-only cache group, a user managed cache group with incremental autorefresh or an AWT cache group.
If INSTALL is specified, the Oracle SQL statement to install the Oracle objects is generated.

If UNINSTALL is specified, the Oracle SQL statement used to remove the Oracle objects is generated. If a cache group is not specified with UNINSTALL, a SQL statement to remove all Oracle objects in the autorefresh user's account is generated.

If the optional filename argument is included, the generated SQL statement is saved to the specified external file. If the external file exists, its contents are destroyed before writing to the file.

close [connect_id.]command_id]
closeall

Closes the prepared command identified by connection name connect_id and command ID command_id. If command_id is not specified, closes the most recent command. If closeall is selected, closes all currently open prepared commands.

cmdcache [[by{sqlcmdid |querytext|owner}]query_subsstring]

Displays the contents of the TimesTen SQL command cache.
Specify the sqlcmdid, querytext or owner column and query substring to search for a specific portion of a SQL query. If no column is specified, searches the querytext column.

If passthrough is enabled, the command ID is not passed through to the Oracle database.

commit

Commits the current transaction (durably if DurableCommits=1 for the connection).

commitdurable

Commits the current transaction durably.

compact

Compacts the database.

compare varA VarB

Compares the values of two variables and reports if they are different. The first difference is reported.

connect[connection_string |[[DSN][as]connid [adding] [connection_string | DSN][as connid]

Connects to the database with the specified ODBC connection_string.
If no password is supplied in this format, ttIsql prompts for the password.

If no user is given, ttIsql attempts to connect using the user name of the current user as indicated by the operating system.

If as connid is specified, you can explicitly name the connection. The connid must be only alphanumeric characters, is case sensitive, must start with an alpha character and can only be a maximum of 30 characters in length. The name of connid is automatically supplied to the ConnectionName general connection attribute. If the connect fails, the current connection is set to a special reserved connection named "none," which is never connected to anything.

When adding is specified, it refers to creating a new connection to the DSN specified by DSN or by the connection string.

createandloadfromoraquery [owner_name.]table_name [num_threads] query

Takes a table name, the number of threads for parallel load and an Oracle SELECT statement.
Creates the table in TimesTen if the table does not exist. Then, loads the table with the query result from Oracle. If the command creates the table, the table column names and types are derived from the query result.

Notes:

The specified TimesTen table cannot be a system table, a synonym, a view, a materialized view or a detail table of a materialized view, a global temporary table, a cache group table or a table that contains compressed columns.

The query cannot have any parameter bindings.

Any unsupported column types result a warning being logged. The output issues a comment for the unsupported column data type.

If you do not supply a value for num_threads, defaults to four threads.

For details and usage information, see "Loading Oracle data into a TimesTen table" in the Oracle TimesTen In-Memory Database Operations Guide.

You must rollback or commit after executing this operation.

Also see the NOTES section in the description of the built-in procedure ttLoadFromOracle.

Required Privileges:

Requires INSERT privilege on the table specified. Also, requires the CREATE TABLE privilege if the table does not exist. The Oracle session user must have all required privileges to execute the query on the Oracle database.

define name [= value]

Defines a string substitution alias.
If no value is provided, ttIsql displays the current definition for the specified name.

You must set define on to enable command substitution. See "Set/show attributes".

describe [[owner_pattern.] name_pattern | procedure_name_pattern |sql_statement | [connect_id.]command_id |*]

List information on tables, synonyms, views, materialized views, materialized view logs, sequences, cache groups, PL/SQL functions, PL/SQL procedures, PL/SQL packages and TimesTen built-in procedures in that order when the argument is [owner_pattern.]name_pattern. Otherwise lists the specific objects that match the given pattern.
Describes the parameters and results columns when the argument is sql_statement.

If passthrough is set to 3, lists information about the same types of objects in the Oracle database.

If * is specified, reports the prepared statements for all connections.

If the table being described is a materialized view log, the message lists the name of the materialized view for which the table is a log. If the table being described has a materialized view log on it, the message indicates the name of the materialized view log.

When describing cache groups, reports information on cache groups defined in the currently connected data source, including the state of any terminated databases that contain autorefresh cache groups.

The command alias is desc.

disconnect [all]

Disconnects from the database. If all is specified, disconnects and closes all connections. When disconnect finishes, the current connection is set to the reserved connection named "none."

dssize [k|m]

Prints database size information in KB or MB. The default is KB.

e: msg
PROMPT msg

Echoes the specified messages, terminated by the end of the line. A semicolon is not required to end the line. Messages are not echoed if verbosity is set to 0.

exec [connect_id.]command_id] | PLSQLSTMT

Executes the prepared command command_id on connection connect_id or executes a PL/SQL statement.
The connect_id optionally names a ttIsql connection and command_id is an integer from 1 to 255.If PLSQLSTMT is supplied, ttIsql prepends the statement with BEGIN and appends the statement with END, thus allowing the PL/SQL statement to execute.

If no argument is supplied, executes the most recent command.

execandfetch [connect_id.]command_id]

Executes and fetches all results from prepared command command_id on connection connect_id. If command_id is not specified, executes and fetches all results from the most recent command.

explain [plan for] {[ Connid.]ttisqlcmdid | sqlcmdid sqlcmdid | sqlstmt |!history}

Explains the plan for the specified SQL statement, including prepared ttIsql statements, specified in the ttisqlcmdid argument, or the sqlcmdid argument.
A digit that is not qualified with the sqlcmdid argument, is interpreted as a ttIsql prepared statement ID.

If passthrough is enabled, the command ID is not passed through to the Oracle database.

fetchall[connect_id.]command_id]

Fetches all results from prepared command command_id on connection connect_id.
If command_id is not specified, fetches all results from the most recent command. The command must already have been executed using exec.

fetchone[connect_id.]command_id]

Fetches one result from prepared command command_id on connection connect_id.
If command_id is not specified, fetches one result from the most recent command. The command must already have been executed using exec.

free [connect_id.]command_id]

Frees prepared command command_id on connection connect_id.
If no command is specified, frees the most recent command.

functions [object_name_pattern]

Lists, in a single column, the names of PL/SQL functions owned by the current user that match the given pattern. When a name pattern is missing, the pattern defaults to %.
If passthrough is enabled, lists PL/SQL functions matching the pattern in the Oracle database.

See the allfunctions command.

globalprocessing statement

Runs the specified statement with global processing enabled.
You cannot specify the statement with the ! command.

help [command [command ...]| all | comments | attributes]

Prints brief or detailed help information for commands.
If specific commands are given as arguments then detailed help for each command is printed.

If you don't know the exact name of a command, try typing just a few characters that may be part of the command name. ttIsql searches and displays help for any commands that include the characters.

If all is given as an argument then detailed help for all commands is printed.

If comments is given as an argument then information on using ttIsql comments within scripts is printed.

If attributes is given as an argument then information on the set/show attributes is printed.

If no argument is given then brief help information for all commands is printed.

history
[-r] [num_commands]

Lists previously executed commands.
The num_commands parameter specifies the number of commands to list. If this parameter is omitted, the previous ten commands are listed by default.

If the-r parameter is specified, commands are listed in reverse order.

The history list stores up to 100 of the most recently executed commands. Use the clearhistory command to clear the history.

See the savehistory command.

host os_command

Executes an operating system command. The command is executed in the same console as ttIsql.
This command sets the environment variable TT_CONNSTR in the environment of the process it creates.

The value of the variable is the connection string of the current connection.

if-then-else

The if-then-else command construct enables you to implement conditional branching logic in a ttIsql session. For more details, see "Syntax for the IF-THEN-ELSE command construct".

indexes[table_name_pattern]

Describes the indexes that it finds on the tables owned by the current user that match the input pattern. When a name pattern is missing, the pattern defaults to %.
If passthrough is enabled, lists indexes on tables matching the pattern in the Oracle database.

See the allindexes command.

monitor

Formats the contents of the MONITOR table for easy viewing.

packages [object_name_pattern]

Lists, in a single column, the names of PL/SQL packages owned by the current user that match the given pattern. When a name pattern is missing, the pattern defaults to %.
If passthrough is enabled, lists PL/SQL packages matching the pattern in the Oracle database.

See the allpackages command.

prepare [[connid.]command_id]SQL_Statement

Prepares the specified SQL statement. If the command_id argument is not specified the command_id is assigned automatically.
The command_id argument can take a value between 0 and 255 inclusive. If connid is specified, switches to the given connection ID. The connid must be only alphanumeric characters and are case insensitive.

print [variable]

Prints the value of the specified bind variable or all variables if no variable is specified. If the variable is a REF CURSOR, then the results are fetched and printed.

procedures [procedure_name_ pattern]

Lists, in a single column, the names of PL/SQL procedures owned by the current user that match the given pattern. When a name pattern is missing, the pattern defaults to %.
If passthrough is enabled, lists PL/SQL procedures matching the pattern in the Oracle database.

See the builtins and allprocedures commands.

quit

Exits ttIsql.

remark msg

Specifies that the message on the line should be treated as a comment. When rem or remark is the first word on the line, ttIsql reads the line and ignores it.

repschemes [[scheme_owner_pattern.]scheme_name_pattern]

Reports information on replication schemes defined in the currently connected data source. This information describes all elements associated with the replication schemes.
If the optional argument is not specified then information on all replication schemes defined in the current data source is reported.

retryconnect [0|1]

Disables(0) or enables(1) the wait for connection retry feature.
If the connection retry feature is enabled then connection attempts to a data source that initially fail due to a temporary situation are retried until the connection attempt succeeds. For example, if data source recovery is in progress when attempting to connect, the connection retry feature causes the connect command to continue to attempt a connection until the recovery process is complete.

If the optional argument is omitted then the connection retry feature is enabled by default.

rollback

Rolls back the current transaction. AutoCommit must be off. This command does not stop IMDB Cache operations on Oracle, including passthrough statements, flushing, manual loading, manual refreshing, synchronous writethrough, propagating and dynamic loading.

rpad varname desiredlength paddingstring

The RPAD command acts like the SQL function RPAD()with some limitations:

- The desired length is in bytes, not characters.

- The padding string is not expanded for string literal escapes, such as unicode escapes.

- The padding string can contain partial unicode characters or full unicode characters and it may split the padding string in the middle of a multibyte character or surrogate pair.

Only variables that are character based (CHAR, VARCHAR) can be padded with the RPAD command.

run filename [arguments]|
start filename [arguments...]|

@@ filename [arguments...]|

@ filename [arguments...]

Reads and executes SQL commands from filename. The run command can be nested up to five levels.
The @@ command is identical to the @ command only if the file is specified with an absolute path.

When @ is used with a relative path, the path is relative to the startup directory of ttIsql. When @@ is used, it is relative to the currently running input file. Therefore @@ is useful when used in a script that must call other scripts. It does not matter what directory the invoker of ttIsql is in when the script is run.

See "Example parameters of command string substitution" for a description of arguments.

savehistory
[-a | -f] outputfile

Writes the history buffer to the specified output file.
Only command, no parameter values are saved in the output file. Therefore, a script may not be able to replay the history from the output file.

If the output file exists, you must specify either the -a or -f option.

If -a is specified, the history is appended to the specified output file.

If -f is specified, the history overwrites the contents of the specified output file.

See the clearhistory and history commands.

sequences[sequence_name_pattern]

Lists, in a single column, the names of sequences owned by the current user that match the given pattern. When a name pattern is missing, the pattern defaults to %.
If passthrough is enabled, lists sequences on tables matching the pattern in the Oracle database.

See the allsequences command.

set attribute [value]

Sets the specified set/show attribute to the specified value.
If no value is specified, displays the current value of the specified attribute.

For a description of accepted attributes, see "Set/show attributes".

setjoinorder tblNames [...]

Specifies the join order for the optimizer. AutoCommit must be off.

setuseindex index_name,correlation_name,
{0 | 1} [;...]

Sets the index hint for the query optimizer.

setvariable variable_name := value

Sets the value of a scalar bind variable or an element of an array bind variable. For example: setvariable myvar := 'TimesTen'; There must be a space on either side of the assignment operator (:=).
For more information, see "Declaring and setting bind variables" in the Oracle TimesTen In-Memory Database Operations Guide.

show {all | attribute}

Displays the value for the specified set/show attribute or displays all the attributes.
For a description of accepted attributes, see "Set/show attributes".

showjoinorder {0 | 1}

Enables or disables the storing of join orders.
0 - Disables the storing of join orders

1 - Enables the storing of join orders.

Call the ttoptshowjoinorder built-in procedure explicitly to display the join order after SELECT, UPDATE, DELETE or MERGE SQL statements.

sleep [n]

Suspends execution for n seconds. If n is not specified then execution is suspended for 1 second.

spool filename [option | OFF]

Writes a copy of the terminal output to the file filename.
If you do not provide an extension to the filename, the filename has the extension .lst. The available options include

CREATE - Creates a new file.

APPEND - Appends output to an existing file.

REPLACE (default) - Overwrites an existing file.

When you specify the value OFF, the spooling behavior is terminated and the output file is closed.

If you specify a spool command while one is running, the active spool is closed and a new files is opened.

sqlcolumns [owner_name_pattern.]table_name_pattern

Prints results of an ODBC call to SQLColumns.

sqlgetinfo infotype

Prints results of an ODBC call to SQLGetInfo.

sqlstatistics [[owner_name_pattern.]table_name_pattern]

Prints results of an ODBC call to SQLStatistics.

sqltables[[owner_name_pattern.]table_name_pattern]

Prints results of a call to SQLTables. The pattern is a string containing an underscore ( _ ) to match any single character or a percent sign (%) to match zero or more characters.

statsclear [[owner_name.]table_name]

Clears statistics for specified table (or all tables if no table is specified).

statsestimate [[owner_name.]table_name] {n rows | p percent}

Estimates statistics for specified table (or all tables if no table is specified).
If you estimate statistics with an empty table list, statistics on system tables are updated also, if you have privileges to update the system tables.

statsupdate [[owner_name_pattern.]table_name_pattern]

Updates statistics for specified table (or all tables if no table is specified).
If tblName is an empty string, statistics are estimated for all the current user's tables in the database..

synonyms [[schema_pattern.]object_pattern]]

Lists, in a single column, the names of synonyms owned by the current user that match the given pattern. When a name pattern is missing, the pattern defaults to %.
If passthrough is enabled, lists synonyms on tables matching the pattern in the Oracle database.

See the allsynonyms command.

tables[table_name_pattern]]

Lists, in a single column, the names of tables owned by the current user that match the given pattern. When a name pattern is missing, the pattern defaults to %.
If passthrough is enabled, lists tables matching the pattern in the Oracle database.

See the alltables command.

tablesize [[owner_name_pattern.]table_name_pattern]]

For each table that matches the pattern, lists the contents of the ALL_TAB_SIZES view.
See the ttComputeTabSizes built-in procedure.

tryglobalprocessing [0|1]

Disables (0) or enables (1) the global processing of eligible queries in the cache grid. If the optional argument is omitted, global processing is enabled. Use show optprofile to query GlobalProcessing.
AutoCommit must be off.

undefine name

Undefines a string substitution alias.

unsetjoinorder

Clears join order advice to optimizer. AutoCommit must be off.

unsetuseindex

Clears the index hint for the query optimizer.

use [conn_id]

Displays the list of current connections and their IDs. If connid is specified, switches to the given connection ID.
To use the name of the first connection, you can specify con0 for the conn_id, rather than specifying the full original connection name. You cannot explicitly name a connection con0. If the first connection is disconnected, con0 refers to the connection none.

If use fails to locate the connection id, the current connection is set to the reserved connection named "none."

See the connect command.

variable [variable_name [data_type] [:= value]]
The syntax for binding multiple values to an array using the variable command is as follows:

variable array_name
'[' array_size ']'
data_type(n):=
'[' value1, ... valuex ']'

Declares a bind variable that can be referenced in a statement or displays the definition of the variable if the type is missing. Type can be one of the following: (n), NUMBER, CHAR(n), NCHAR(n), VARCHAR2(n) , NVARCHAR2(n), BLOB, CLOB, NCLOB, or REFCURSOR. If only (n) is supplied, it is assumed to be VARCHAR2 (n).
Can be used to assign a value to a single variable or multiple values if the data type is an array. Can assign a value later with the setvariable command.

For more information, see "Declaring and setting bind variables" in the Oracle TimesTen In-Memory Database Operations Guide.

version

Reports version information.

views [table_name_pattern]

Lists, in a single column, the names of views owned by the current user that match the given pattern. When a name pattern is missing, the pattern defaults to "%".
If passthrough is enabled, lists views matching the pattern in the Oracle database.

See the allviews command.

waitfor expected_result timeoutseconds sqlstatement

Runs the given statement once a second until the query returns the expected result or a timeout occurs. the query must have only one column and must return exactly one row. Any errors in the query terminate the loop.

whenever sqlerror

Provide direction on how to handle errors when in ttIsql. For more details, see "Syntax for the WHENEVER SQLERROR command".

xlabookmarkdelete id

Deletes a persistent XLA bookmark.
If a bookmark to delete is not specified then the status of all current XLA bookmarks is reported.

Also see "ttXlaDeleteBookmark" in Oracle TimesTen In-Memory Database C Developer's Guide.

Requires ADMIN privilege or object ownership.

Syntax for the IF-THEN-ELSE command construct

This section provides the syntax for the IF-THEN-ELSE construct. For more details on using the IF-THEN-ELSE command construct, see "Conditional control with the IF-THEN-ELSE command construct" in the Oracle TimesTen In-Memory Database Operations Guide.

IF [NOT]
{ Literal1 | :BindVariable1 }
{ =  | IN }
{ Literal2 | :BindVariable2 | SelectStatement }
THEN "ThenCommands"
[ ELSE "ElseCommands" ] ;

Table 3-1 IF-THEN-ELSE command

Parameter

Description

IF

The IF command must end in a semicolon (;).

The IF command fails if improper syntax is given, the BindVariables do not exist or the SELECT statement fails to execute or does not return just a single column.

NOT

Using NOT reverses the desired result of the condition.

Literal1, Literal2

A value that can be part of a comparison.

BindVariable1, BindVariable2

A bind variable is equivalent to a parameter. You can use the :BindVariable1 notation for passing bind variables into this construct. The variable can be created and set using the variable or setvariable ttIsql commands.

= | IN

The IN operator can only be used with the SelectStatement. The IN operator can be used with zero or more returned rows. The equal (=) operator can only be used with a single returned row.

SelectStatement

A provided SELECT statement must start with SELECT. The SELECT statement can return only one column. In addition, it can return only one row when the equal (=) operator is provided.

The SelectStatement is not available if you are not connected to the database.

ThenCommands, ElseCommands

All commands in the THEN or ELSE clauses must be delimitted by a semicolon and cannot contain embedded double quotes. These clauses can conditionally execute ttIsql commands, such as host or run, which cannot be executed through PL/SQL. The CALL statement can be used within the THEN or ELSE clauses. You cannot use PL/SQL blocks.

Restrictions for the IF-THEN-ELSE construct are as follows:

- You cannot compare variables of the LOB data type.

- The values are compared case-sensitive with strcmp. A character padded value might not match a VARCHAR2 because of the padding.

Syntax for the WHENEVER SQLERROR command

Execute the WHENEVER SQLERROR command to prescribe what to do when a SQL error occurs. For more details and examples on how to use the WHENEVER SQLERROR command, see "Error recovery with the WHENEVER SQLERROR" command in the Oracle TimesTen In-Memory Database Operations Guide.

WHENEVER SQLERROR { ExitClause | ContinueClause | SUPPRESS |
SLEEP Number | ExecuteClause }

When you specify EXIT, always exit ttIsql if an error occurs. ExitClause is as follows:

EXIT [ SUCCESS | FAILURE | WARNING | Number | :BindVariable ]
[ COMMIT | COMMIT ALL | ROLLBACK ]

When you specify CONTINUE, ttIsql continues to the next command, even if an error occurs. ContinueClause is as follows:

CONTINUE [ COMMIT | COMMIT ALL | ROLLBACK | NONE ]

Execute specified commands before continuing. ExecuteClause is as follows:

EXECUTE "Cmd1;Cmd2;...;"

The WHENEVER SQLERROR command options are as follows:

- EXIT: Always exit ttIsql if an error occurs. Specify what is performed before ttIsql exits with one of the following. SUCCESS is the default option for EXIT.

- SUCCESS or FAILURE or WARNING: Return SUCCESS (value 0), FAILURE (value 1), or WARNING (value 2) to the operating system after ttIsql exits for any SQL error.

- Number: Specify a number from 0 to 255 that is returned to the operating system as a return code. Once ttIsql exits, you can retrieve the error return code with the appropriate operating system commands. For example, use echo $status in the C shell (csh) or echo $? in the Bourne shell (sh) to display the return code.
The return code can be retrieved and processed within batch command files to programmatically detect and respond to unexpected events.

- :BindVariable: Returns the value in a bind variable that was previously created in ttIsql with the variable command. The value of the variable at the time of the error is returned to the operating system in the same manner as the Number option.

Note:
The bind variable used within the WHENEVER SQLERROR command cannot be defined as a LOB, REFCURSOR, or any array data type.

In addition, you can specify whether to commit or rollback all changes before exiting ttIsql.

- COMMIT: Executes a COMMIT and saves changes only in the current connection before exiting. The other connections exit with the normal disconnect processing, which rolls back any uncommitted changes.

- COMMIT ALL: Executes a COMMIT and saves changes in all connections before exiting.

- ROLLBACK: Before exiting, executes a ROLLBACK and abandons changes in the current connection and, by default, in all other connections. The other connections exit with the normal disconnect processing, which automatically rolls back any uncommitted changes.

- CONTINUE: Do not exit if an error occurs. The SQL error is displayed, but the error does not cause ttIsql to exit. The following options enable you to specify what is done before continuing to the next ttIsql command:

- NONE: This is the default. Take no action before continuing.

- COMMIT: Executes a COMMIT and saves changes in the current connection before continuing.

- COMMIT ALL: Executes a COMMIT and saves changes in all connections before continuing.

- ROLLBACK: Before continuing, executes a ROLLBACK and abandons changes in the current connection and, by default, in all other connections. The other connections exit with the normal disconnect processing, which automatically rolls back any uncommitted changes.

- SUPPRESS: Do not show any error messages and continue.

- SLEEP: Sleep for a specified number of seconds before continuing.

- EXECUTE: Execute specified commands before continuing. Each command is separated from the other commands by a semicolon (;). If any command triggers additional errors, those errors may cause additional actions that could potentially result in a looping condition.

Set/show attributes

Also see the list of ttIsql "Commands". Some commands appear here as attributes of the set command. In that case, they can be used with or without the set command.

Boolean attributes can accept the values "ON" and "OFF" in place of "1" and "0".

ttIsql set supports these attributes:

Attribute

Description

all

With show command only. Displays the setting of all the ttIsql commands.

autocommit [1|0]

Turns AutoCommit off and on. If no argument is given, displays the current setting.

autovariables [1|0]

Turns autovariables off and on. TimesTen creates an automatic bind variable with the same name as each column in the last fetched row. An automatic bind variable can be used in the same manner of any bind variable. For more information, see "Automatically creating bind variables for retrieved columns" in the Oracle TimesTen In-Memory Database Operations Guide.

columnlabels [0 | 1]

Turns the columnlabels feature off (0) or on (1).
If no argument is specified, the current value of columnlabels is displayed.

The initial value of columnlabels is off (0) after connecting to a data source.

When the value is on (1), the column names are displayed before the SQL results.

You can also enable this attribute without specifying the set command.

connstr

Prints the connection string returned from the driver from the SQLDriverConnect call. This is the same string printed when ttIsql successfully connects to a database.

define [&|c|on|off]

Sets the character used to prefix substitution variables to c.
ON or OFF controls whether ttIsql scans commands for substitution variables and replaces them with their values. ON changes the value of c back to the default &. (It does not change it to the most recently used character.)

Default value for ttIsql is OFF (no variable substitution). See "Example parameters using "variable" and "print"" for an explanation of the default.

dynamicloadenable [on|off]

Enables or disables dynamic load of Oracle data to a TimesTen dynamic cache group. By default, dynamic load of Oracle data is enabled.

echo [on | off]

With the set command, prints the commands listed in a run, @ or @@ script to the terminal as they are executed.
If off, the output of the commands is printed but the commands themselves are not printed.

editline [0 | 1]

Turns the editline function off and on. By default, editline is on.
If editline is turned off, the backspace character deletes full characters, but the rest of editline capabilities are unavailable.

err | error |errors [.objecttype[schema.] name]

Shows errors command display error information about the given PL/SQL object.If no object type or object name is supplied, ttIsql assumes the PL/SQL object that you last attempted to create and retrieves the errors for that object. If no errors associated with the given object are found, or there was no previous PL/SQL DDL, then ttIsql displays "No errors."

feedback [on | off] rows

Controls the display of status messages after statement execution.
When rows is specified, if the statement affected more than the specified number of rows, then the feedback indicates the number of affected rows. If the number of rows affected is less than the specified threshold, the number of rows is not printed.Feedback is not provided for tables, views, sequences, materialized views or indexes. It is available for PL/SQL objects.

isolation [{READ_COMMITTED | 1}| {SERIALIZABLE | 0}]

Sets isolation level. If no argument is supplied, displays the current value.
You can also enable this attribute without specifying the set command.

loboffset n

Specifies the offset into the LOB that ttIsql should use as the starting point when it prints the resulting value of a LOB. For example if the value of the LOB is ABCEDFG, and the offset is 4, ttIsql prints DEFG, skpping the first 3 bytes.
The behavior is the same sa LOBOFFSET in SQL*Plus.

long n

Reports or controls the maximum number of characters for CLOB or BLOB data or the maximum number of bytes for BLOB data that are displayed when fetched or printed.
The default value is 80.

The command setting is valid for all connections in a session.

longchunksize n

Specifies the size of the chunk that ttIsql uses to get LOB data.

multipleconnections [1 | ON] mc [1 | ON]

Reports or enables handling of multiple connections.By default, ttIsql allows the user to have one open connection at a time.
If the argument 1 or ON is specified the prompt is changed to include the current connection and all multipleconnection features are enabled.

If no value is supplied, the command displays the value of the multipleconnections setting.

You can also enable this attribute without specifying the set command.

ncharencoding [encoding]

Specifies the character encoding method for NCHAR output. Valid values are LOCALE or ASCII.
LOCALE sets the output format to the locale-based setting.

If no value is specified, TimesTen uses the system's native language characters.

You can also enable this attribute without specifying the set command.

optfirstrow [1|0]

Enables or disables First Row Optimization.
If the optional argument is omitted, First Row Optimization is enabled.

You can also enable this attribute without specifying the set command.

optprofile

Prints the current optimizer flag settings and join order.
This attribute cannot be used with the set command.

passthrough [0|1|2|3|4|5]

Sets the IMDB Cache passthrough level for the current transaction. Because AutoCommit must be off to execute this command, ttIsql temporarily turns off AutoCommit when setting the passthrough level.
0 - SQL statements are executed only against TimesTen.

1 - Statements other than INSERT, DELETE or UPDATE and DDL are passed through if they generate a syntax error in TimesTen or if one or more tables referenced within the statement are not in TimesTen. All INSERT, DELETE and UPDATE statements are passed through if the target table cannot be found in TimesTen. DDL statements are not passed through.

2 - Same as 1, plus any INSERT, UPDATE and DELETE statement performed on READONLY cache group tables is passed through.

3 - All SQL statements, except COMMIT and ROLLBACK, and TimesTen built-in procedures that set or get optimizer flags are passed through. COMMIT and ROLLBACK are executed on both TimesTen and Oracle.

4 - All SELECT statements on global cache groups tables that cannot use dynamic load are executed on Oracle.

5 - All SELECT statements on global cache groups tables that cannot use dynamic load are executed on Oracle. The SELECT statement is not executed until after all committed changes to the global cache group are propagated to Oracle.

If no optional argument is supplied, the current setting is displayed.

After the transaction, the passthrough value is reset to the value defined in the connection string or in the DSN or the default setting if no value was supplied to either.

You can also enable this attribute without specifying the set command.

Note: Some Oracle objects may not be described by ttIsql.

prefetchcount [prefetch_count_size]

Sets the prefetch count size for the current connection. If the optional argument is omitted, the current prefetch count size is reported. Setting the prefetch count size can improve result set fetch performance. The prefetch_count_size argument can take an integer value between 0 and 128 inclusive.
You can also enable this attribute without specifying the set command.

prompt [string]

Replaces the Command> prompt with the specified string.
To specify a prompt with spaces, you must quote the string. The leading and trailing quotes are removed.

A prompt can have a string format specifier (%c) embedded. The %c is expanded with the name of the current connection.

querythreshold [seconds]

With the show command, displays the value of the Query Threshold first connection attribute.
With the set command, modifies the value of the QueryThreshold first connection attribute that was set in the connection string or odbc.ini file.

Specify a value in seconds that indicates the number of seconds that a query can execute before TimesTen writes a warning to the support log or throws an SNMP trap.

rowdelimiters [0|off] | [ {1|on} [begin end]]

Controls the row delimiters in result sets. When on, user queries have the row delimited with < and > unless begin and end are specified. Not all result sets are affected by this control.
The default is on.

serveroutput [on | off]

With the set command set to on, after each executed SQL statement, displays any available output. This output is available for debugging I/O purposes, if the PL/SQL DBMS_OUTPUT package is set to store the output so that it can be retrieved using this command.
The default is off, (no server output is displayed) as performance may be slower when using this command. If you set serveroutput to on, TimesTen uses an unlimited buffer size.

DBMS_OUTPUT.ENABLE is per connection, therefore set serveroutput on affects the current connection only.

showcurrenttime [1|true|on] | [0|false|off]

Enable or disable printing of the current wall clock time.

showplan [0 | 1]

Enables (1) or disables (0) the display of plans for selects/updates/deletes in this transaction. If the argument is omitted, the display of plans is enabled. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

sqlquerytimeout [seconds]

Specifies the number of seconds to wait for a SQL statement to execute before returning to the application for all subsequent calls.
If no time or 0 seconds is specified, displays the current timeout value.

The value of seconds must be equal to or greater than 0.This attribute does not stop IMDB Cache operations on Oracle, including passthrough statements, flushing, manual loading, manual refreshing, synchronous writethrough, propagating, and dynamic loading.

You can also enable this attribute without specifying the set command.

timing [1|0]

Enables or disables printing of query timing.
You can also enable this attribute without specifying the set command.

tryhash [1|0]

Enables or disables use of hash indexes by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

trymaterialize [1|0]

Enables or disables materialization by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

trymergejoin [1|0]

Enables or disables use of merge joins by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

trynestedloopjoin [1|0]

Enables or disables use of nested loop joins by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

tryrowid [1|0]

Enables or disables rowID scan hint.

tryrowlocks [1|0]

Enables or disables use of row-level locking by the optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

tryserial [1|0]

Enables or disables use of serial scans by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

trytmphash [1|0]

Enables or disables use of temporary hashes by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

trytbllocks [1|0]

Enables or disables use of table-level locking by the optimizer. AutoCommit must be off.
You can also set this attribute without specifying the set command.

trytmptable [1|0]

Enables or disables use of temporary tables by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

trytmprange [1|0]

Enables or disables use of temporary range indexes by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

tryrange [1|0]

Enables or disables use of range indexes by optimizer. AutoCommit must be off.
You can also enable this attribute without specifying the set command.

verbosity [level]

Changes the verbosity level. The verbosity level argument can be an integer value of 0, 1, 2, 3 or 4. If the optional argument is omitted then the current verbosity level is reported.
You can also enable this attribute without specifying the set command.

vertical [{0 | off} | {1 | on} | statement]

Sets or displays the current value of the vertical setting. The default value is 0 (off).
If statement is supplied, the command temporarily turns vertical on for the given statement. This form is only useful when the vertical flag is off.

The vertical setting controls the display format of result sets. When set, the result sets are displayed in a vertical format where each column is on a separate line and is displayed with a column label.

You can also enable this attribute without specifying the set command.

Comment syntax

The types of comment markers are:

# [comment_text]
-- [comment_text]
/* [comment_text] */

The C-style comments ( /* [comment_text] */) can span multiple lines.

The comments delimited by the

#

and the

-

characters should not span multiple lines. If a comment marker is encountered while processing a line, then the remainder of the line is ignored.

'--' at the beginning of a line is considered a SQL comment. The line is considered a comment and no part of the line is included in the processing of the SQL statement. A line that begins with '--+' is interpreted as a segment of a SQL statement.

The comment markers can work in the middle of a line.

Example:

monitor; /*this is a comment after a ttIsql command*/

Command history

ttIsql implements a csh-like command history.

Command Usage: history [-r] [num_commands]

Description: Lists previously executed commands. The num_commands parameter specifies the number of commands to list. If the -r parameter is specified, commands are listed in reverse order.

Command Usage: ! [command_id|command_string| !]

Description: Executes a command in the history list. If a command_id argument is specified, the command in the history list associated with this ID is executed again. If the command_string argument is specified, the most recent command in the history list that begins with command_string is executed again. If the ! argument is specified then the most recently executed command is executed again.

Example: "!!;" -or- "!10;" -or- "!con;"

Also see the clearhistory, history, savehistory commands.

Command shortcuts

By default, ttIsql supports keystroke shortcuts when entering commands. To turn this feature off, use:

Command> set editline=0;

The bindings available are:

Keystroke

Action

Left Arrow

Moves the insertion point left (back).

Right Arrow

Moves the insertion point right (forward).

Up Arrow

Scroll to the command before the one being displayed. Places the cursor at the end of the line.

Up Arrow <RETURN>

Scrolls to the PL/SQL block before the one being displayed.

Down Arrow

Scrolls to a more recent command history item and puts the cursor at the end of the line.

Down Arrow <RETURN>

Scrolls to the next PL/SQL block after the one being displayed.

Ctrl-A

Moves the insertion point to the beginning of the line.

Ctrl-E

Moves the insertion point to the end of the line.

Ctrl-K

"Kill" - Saves and erases the characters on the command line from the current position to the end of the line.

Ctrl-Y

"Yank"- Restores the characters previously saved and inserts them at the current insertion point.

Ctrl-F

Forward character - move forward one character. (See Right Arrow.)

Ctrl-B

Backward character - moved back one character. (See Left Arrow.)

Ctrl-P

Previous history. (See Up Arrow.)

Ctrl-N

Next history. (See Down Arrow.)

Parameters

With dynamic parameters, you are prompted for input for each parameter on a separate line. Values for parameters are specified the same way literals are specified in SQL.

SQL_TIMESTAMP columns can be added using dynamic parameters. (For example, values like '1998-09-08 12:1212').

Parameter values must be terminated with a semicolon character.

The possible types of values that can be entered are:

- Numeric literals. Example: 1234.5

- Time, date or timestamp literals within single quotation marks. Examples:

'12:30:00''2000-10-29''2000-10-29 12:30:00''2000-10-29 12:30:00.123456'

- Unicode string literals within single quotation marks preceded by 'N'. Example: N'abc'

- A NULL value. Example: NULL

- The '*' character which indicates that the parameter input process should be stopped. Example: *

- The '?' character prints the parameter input help information. Example: ?

Example parameters of command string substitution

Command> select * from dual where :a > 100 and :b < 100;
Type '?' for help on entering parameter values.
Type '*' to end prompting and abort the command.
Type '-' to leave the parameter unbound.
Type '/;' to leave the remaining parameters unbound and execute the command.

Enter Parameter 1 'A' (NUMBER) > 110
Enter Parameter 2 'B' (NUMBER) > 99
< X >
1 row found.
Command> var a number;
Command> exec :a := 110;

PL/SQL procedure successfully completed.

Command> print a
A                    : 110
Command> var b number;
Command> exec :b := 99;

PL/SQL procedure successfully completed.

Command> select * from dual where :a > 100 and :b < 100;
< X >
1 row found.
Command> print
A                    : 110
B                    : 99
Command> select * from dual where :a > 100 and :b < 100 and :c > 0;
Enter Parameter 3 'C' (NUMBER) > 1
< X >
1 row found.
Command>

Default options

You can set the default command-line options by exporting an environment variable called TTISQL. The value of the TTISQL environment variable is a string with the same syntax requirements as the TTISQL command line. If the same option is present in the TTISQL environment variable and the command line then the command line version always takes precedence.

Examples

Execute commands from ttIsql.inp.

ttIsql -f ttIsql.inp

Enable all output. Connect to DSN RunData and create the database if it does not exist.

ttIsql -v 4 -connStr "DSN=RunData;AutoCreate=1"

Print the interactive commands.

ttIsql -helpcmds

Print the full help text.

ttIsql -helpfull

Display the setting for all ttIsql set/show attributes:

Command> show all;
Connection independent attribute values:

autoprint = 0 (OFF)
columnlabels = 0 (OFF)
define = 0 (OFF)
echo 1 (ON)
FEEDBACK ON
multipleconnections =0 (OFF)
ncharencoding = LOCALE (US7ASCII)
prompt = 'COMMAND>'
timing = 0 (OFF)
verbosity = 2
vertrical = 0 (OFF)

Connection specific attribute values:

autocommit = 1 (ON)
Client timeout = 0
Connection String DSN=repdb1_1121;UID=timesten; DataStore=/DS/repdb1_1121;
DatabaseCharacterSet=AL32UTF8; ConnectionCharacterSet=US7ASCII;
DRIVER=/opt/TimesTen/tt1122/lib/libtten.so; PermSize=20;TempSize=20;TypeMode=1;
No errors.
isolation = READ_COMMITTED
Prefetch count = 5
Query threshold = 0 seconds (no threshold)
Query timeout = 0 seconds (no timeout)
serveroutput OFF

Current Optimizer Settings:
Scan: 1
Hash: 1
Range: 1
TmpHash: 1
TmpTable: 1
NestedLoop: 1
MergeJoin: 1
GenPlan: 0
TblLock: 1
RowLock: 1
Rowid: 1
FirstRow: 1
IndexedOr: 1
PassThrough: 0
BranchAndBound: 1
ForceCompile: 0
CrViewSemCheck: 1
ShowJoinOrder: 0
CrViewSemCheck: 1
UserBoyerMooreStringSearch: 0
DynamicLoadEnable: 1
DynamicLoadErrorMode: 0
NoRemRowIdOpt: 0

Current Join Order:
<>

Command

Prepare and exec an SQL statement.

ttIsql (c) 1996-2011, TimesTen, Inc. All rights reserved.
ttIsql -connStr "DSN=RunData"
Type ? or "help" for help, type "exit" to quit ttIsql.
(Default setting AutoCommit=1)
Command> prepare 1 SELECT * FROM my_table;
Command> exec 1;
Command> fetchall;

Example vertical command:

Command> call ttlogholds;
< 0, 265352, Checkpoint , DS.ds0 >
< 0, 265408, Checkpoint , DS.ds1 >
2 rows found.
Command> vertical call ttlogholds;

HOLDLFN:       0

HOLDLFO:       265352
TYPE:          Checkpoint
DESCRIPTION:   DS.ds0
HOLDLFN:       0

HOLDLFO:       265408
TYPE:          Checkpoint
DESCRIPTION:   DS.ds1
2 rows found.

Command>

To create a new user, use single quotes around the password name for an internal user:

ttIsql -connStr "DSN=RunData"
ttIsql (c) 1996-2000, TimesTen, Inc. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.
(Default setting AutoCommit=1)
Command> CREATE USER terry IDENDTIFIED BY `secret';

To delete the XLA bookmark mybookmark, use:

ttIsql -connStr "DSN=RunData"
ttIsql (c) 1996-2000, TimesTen, Inc. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql. (Default setting
AutoCommit=1)
Command> xlabookmarkdelete;
XLA Bookmark: mybookmark
Read Log File:  0
Read Offset:    268288
Purge Log File: 0
Purge Offset:   268288
PID:            2004
In Use:         No
1 bookmark found.

Command> xlabookmarkdelete mybookmark;

Command> xlabookmarkdelete;

0 bookmarks found.

Example of managing XLA bookmarks

You can use the xlabookmarkdelete command to both check the status of the current XLA bookmarks and delete them. This command requires XLA privilege or object ownership.

For example, when running the XLA application, 'xlaSimple', you can check the bookmark status by entering:

Command> xlabookmarkdelete;

XLA Bookmark: xlaSimple
Read Log File: 0
Read Offset: 630000
Purge Log File: 0
Purge Offset: 629960
PID: 2808
In Use: No
1 bookmark found.

To delete the bookmark, enter:

Command> xlabookmarkdelete xlaSimple;
Command>

Example parameters using "variable" and "print"

Substitution in ttIsql is modeled after substitution in SQL*Plus. The substitution feature is enabled by set define on or set define substitution_char'. The substitution character when the user specifies 'on' is '&'. It is disabled with 'set define off'.By default, substitution is off. The default is off because the & choice for substitution character conflicts with TimesTen's use of ampersand as the BIT AND operator.When enabled, the alphanumeric identifier following the substitution character is replace by the value assigned to that identifier. When disabled, the expansion is not performed.New definitions can be defined even when substitution is off. You can use the define command to list the definitions ttIsql predefines.

Command> show define
define = 0 (OFF)
Command> define
DEFINE            _PID = "9042" (CHAR)
DEFINE      _O_VERSION = "TimesTen Release 11.2.1.0.0" (CHAR)
Command> select '&_O_VERSION' from dual;
< &_O_VERSION >
1 row found.
Command> set define on
Command> SELECT '&_O_VERSION' FROM DUAL;
< TimesTen Release 11.2.1.0.0 >
1 row found.

If the value is not defined, ttIsql prompts you for the value.When prompting and only one substitution character is used before the identifier, the identifier is defined only for the life of the one statement.If two substitution characters are used and the value is prompted, it acts as if you have explicitly defined the identifier.

Command> SELECT '&a' FROM DUAL;
Enter value for a> hi
< hi >
1 row found.
Command> define a
symbol a is UNDEFINED
The command failed.
Command> SELECT '&&a' FROM DUAL;
Enter value for a> hi there
< hi there >
1 row found.
Command> define a
DEFINE               a = "hi there" (CHAR)

Additional definitions are created with the define command:

Command> define tblname = sys.dual
Command> define tblname
DEFINE         tblname = "sys.dual" (CHAR)
Command> select * from &tblname;
< X >
1 row found.

Arguments to the run command are automatically defined to '&1', '&2', ... when you add them to the run or @ (and @@) commands:Given this script:

CREATE TABLE &1 ( a INT PRIMARY KEY, b CHAR(10) );
INSERT INTO &1 VALUES (1, '&2');
INSERT INTO &1 VALUES (2, '&3');SELECT * FROM &1;

Use the script:

Command> SET DEFINE ON
Command> @POPULATE mytable Joe Bob;

CREATE TABLE &1 ( a INT PRIMARY KEY, b CHAR(10) );
INSERT INTO &1 VALUES (1, '&2');
1 row inserted.

INSERT INTO &1 VALUES (2, '&3');
1 row inserted.

SELECT * FROM &1;
< 1, Joe        >
< 2, Bob        >
2 rows found.
Command>

This example uses the variable command. It deletes an employee from the employee table. Declare empid and name as variables with the same data types as employee_id and last_name. Delete the row, returning employee_id and last_name into the variables. Verify that the correct row was deleted.

Command> VARIABLE empid NUMBER(6) NOT NULL;
Command> VARIABLE name VARCHAR2(25) INLINE NOT NULL;
Command> DELETE FROM employees WHERE last_name='Ernst'
> RETURNING employee_id, last_name INTO :empid,:name;
1 row deleted.
Command> PRINT empid name;
EMPID                : 104
NAME                 : Ernst

Notes

The ttIsql utility supports only generic REF CURSOR variables, not specific REF CURSOR types.

Multiple ttIsql commands are allowed per line separated by semicolons.

The ttIsql utility command line accepts multiline PL/SQL statements, such as anonymous blocks, that are terminated with the "/" on it's own line. For example:

Command> set serveroutput on
Command> BEGIN
> dbms_ouput.put_line ('Hi There');
> END;
>/
Hi There

PL/SQL block successfully executed.

Command>

For UTF-8, NCHAR values are converted to UTF-8 encoding and then output.

For ASCII, those NCHAR values that correspond to ASCII characters are output as ASCII. For those NCHAR values outside of the ASCII range, the escaped Unicode format is used. For example:

U+3042 HIRAGANA LETTER A

is output as

Command> SELECT c1 FROM t1;
< a\u3042 >

NCHAR parameters must be entered as ASCII N-quoted literals:

Command> prepare SELECT * FROM t1 WHERE c1 = ?;
Command> exec;

Type '?;' for help on entering parameter values. Type '*;' to abort the parameter entry process.

Enter Parameter 1> N'XY';

On Windows, this utility is supported for all TimesTen Data Manager and Client DSNs.

ttMigrate

Description

Performs one of these operations:

- Saves a migrate object from a TimesTen database into a binary datafile.

- Restores the migrate object from the binary datafile into a TimesTen database.

- Examines the contents of a binary datafile created by this utility.

Migrated objects include:

- Tables

- Cache group definitions

- Views and materialized views

- Materialized view log definitions

- Sequences

- Replication schemes

The ttMigrate utility is used when upgrading major release versions of TimesTen, since database checkpoint and log files are not compatible between major releases. For an example, see the Oracle TimesTen In-Memory Database Installation Guide.

When you migrate a database into Release 11.2.1 from a previous release, users and user privileges are not migrated. When you migrate a database between releases of Release 11.2.1 or into a release later than Release 11.2.1, users and user privileges are migrated.

Binary files produced by this utility are platform-dependent. For example a binary file produced on Windows must be restored on Windows. Use the ttBulkCp or ttMigrateCS (UNIX only) utility to copy data between platforms.

The ttMigrate utility can be used to copy data between bit-levels within the same architecture. For example, it can be used to move data from a 32-bit Solaris system to a 64-bit Solaris system. The -relaxedUpgrade option must be used when changing bit-levels and the database should not be involved in a replication scheme, in this case.

On UNIX, this utility is supported for TimesTen Data Manager DSNs. For TimesTen Client DSNs, use the utility ttMigrateCS.

Required privilege

This utility requires various privileges depending on the options specified. In general, a user must be the instance administrator or have the ADMIN privilege to use this utility.

Using the -r option requires the instance administrator privilege, as it generally creates a database. If the database has been created at the time this option is used, it requires CREATE ANY TABLE, CREATE ANY SEQUENCE, CREATE ANY VIEW, CREATE ANY MATERIALIZED VIEW, CREATE ANY CACHE GROUP, CREATE ANY INDEX privileges and ADMIN if autocreation of users is necessary. If the database is involved in replication or IMDB Cache, then CACHE_MANAGER is also required.

Using the -c option to capture an entire database requires the ADMIN privilege. If the database is involved in replication or IMDB Cache, then CACHE_MANAGER is also required. Using the -c option to capture a subset of the database objects (tables, views, materialized views, cache groups, sequences) requires SELECT ANY TABLE and SELECT ANY SEQUENCE privileges.

Syntax

ttMigrate {-h | -help | -?}

ttMigrate {-V | -version}

To create or append a binary datafile, use:

ttMigrate {-a | -c} [-v verbosity] [-nf] [-nr] [-fixNaN] [-saveAsCharset charset]
[-exactUpgrade | -relaxedUpgrade]
[-convertTypesToOra | -convertTypestoTT]]
{-connStr connection_string | DSN} dataFile [objectOwner.]objectName

To restore a database from a binary datafile created by this utility, use:

ttMigrate -r -relaxedUpgrade  [-numThreads n] [-inline rule] [-v verbosity]
[-fixNaN] [-nf] [-nr] [-C chkPtFreq] [-localhosthostName]
[-n noCharsetConversion] [-cacheUid uid [-cachePwd pwd]]
[-convertCGtypes]  [-autorefreshPaused] [-convertTypesToOra | -convertTypesToTT]
[-noAutoCreateUsers] -connStr connection_string | DSN} dataFile
[[objectOwner.]objectName]

or

ttMigrate -r -exactUpgrade  [-numThreads n] [-vverbosity] [-fixNaN] [-nf] [-nr]
[-C chkPtFreq] [-localhost hostName] [-noCharsetConversion]
[-cacheUid uid [-cachePwd pwd]] [-convertCGtypes]
[-updateStats | -estimateStats percentRows] {-connStr connection_string | DSN}
dataFile [[objectOwner.]objectName]

To list or display the contents of a binary datafile created by this utility, use:

ttMigrate {-l | -L | -d | -D} dataFile [[objectowner.]name ...]

Options

Note:
The append (-a) or create (-c) modes, the list (-l/-L) or describe (-d/-D) modes and the restore (-r) modes are exclusive of each other. You cannot specify any of these options on the same line as any other of these options.

ttMigrate has the options:.

Option

Description

-a

Selects append mode: Appends data to a pre-existing binary data file, that was originally created using ttMigrate -c. See "Create mode (-c) and Append mode (-a)" for more details.

-c

Create mode: Creates an original binary datafile. See "Create mode (-c) and Append mode (-a)" for more details.

-cacheUid

The cache administration user ID to use when restoring asynchronous writethrough cache groups and cache groups with the AUTOREFRESH attribute.

-cachePwd

The cache administration password to use when restoring autorefresh and asynchronous writethrough cache groups and cache groups with the AUTOREFRESH attribute.
If the cache administration user ID is provided on the command line but the cache administration password is not, then ttMigrate prompts for the password.

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

-convertTypesToOra
-convertTypesToTT

Converts TimesTen data types to Oracle data types or Oracle data types to TimesTen data types. These options require the-relaxedUpgrade option.
In TimesTen 11.2.2 the default type mode is ORACLE type mode. The -convertTypesToOra is useful when migrating older databases into TimesTen 11.2.2.

The -convertTypesToTT option is useful to allow backward migration into a release that does not support Oracle types.

These options apply to all table types except materialized views. Table types include: regular, cached, global and temporary tables.

See also -convertCGTypes, "TimesTen to Oracle data type conversions" and "Oracle to TimesTen data type conversions".

-d

Selects Describe mode. Displays a short description of the objects in the datafile. See "Describe mode (-d)" for more details.

-D

Selects Long-describe mode. Displays a full description of the objects in the datafile. See "Long-describe mode (-D)" for more details.

dataFile

The path name of the datafile to which migrate objects are to be saved or from which migrate objects are to be restored.

DSN

Specifies an ODBC data source name of the database to be migrated.

-estimateStats percent

Specifies that ttMigrate should estimate statistics on restored tables and materialized views for the specified percentage of rows. Legal values for percentRows are 0 to 100, inclusive. This option is ignored when the -c or -a options are given.
If you specify both -estimateStats and -updateStats, statistics on restored tables are updated, not estimated.

Use of this flag may improve the performance of materialized view restoration and may also improve the performance of queries on the restored tables and views.

-fixNaN

Converts all NaN, Inf and -Inf values found in migrate objects to 0.0. This is useful for migrating data into releases of TimesTen that do not support the NaN, Inf and -Inf values.

-h
-help

-?

Prints a usage message and exits.

-inline rule

Indicates the rule to be used for converting variable-length columns to INLINE in restore mode. The value for rule is one of:
preserve - ttMigrate preserves the original INLINE attribute of each column. This is the default, and it is required if -exactUpgrade is used.

dsDefault - ttMigrate uses the database's default rule for setting the INLINE attribute of restored columns.

maxlen - ttMigrate restores as INLINE all variable-length columns with length <= maxlen and restores as NOT INLINE all variable-length columns with length greater than maxlen.

If maxlen is 0 then all columns are restored as NOT INLINE.When this option is used during migration, the database should not be replicated with databases from a TimesTen version that does not support INLINE columns.

INLINE variable-length columns cannot successfully be replicated to NOT INLINE columns.

-l

Selects List mode. Lists the names of database objects in the specified datafile. See "List mode (-l) and Long-list mode (-L)" for more details.

-L

Selects Long-list mode. Lists the names of database objects in the specified datafile and other details about the database objects. See "List mode (-l) and Long-list mode (-L)" for more details.

-r

Selects Restore mode. Restores a database from a binary datafile created by this utility. See "Restore mode (-r)" for more details.

name

The name of the database object(s) to be saved or restored.

-nf

Specifies that ttMigrate should not save or restore foreign key information when saving or restoring ordinary (non-cached) tables.

-nr

Specifies that ttMigrate should not save or restore table rows when saving or restoring ordinary (non-cached) tables.

-noAutoCreateUsers

Specifies that ttMigrate should not create users.
By default, TimesTen creates "disabled" users when migrating tables from releases earlier than 11.2.1. TimesTen creates users but does not assign any privileges to these users. You must explicitly assign privileges, including CREATE SESSION, to these users after they are created.

-relaxedUpgrade

Save or restore the tables in a way that is compatible with a replication scheme that uses TABLE DEFINITION CHECKING RELAXED. Use of this option may cause the restored tables to be slightly more compact and slightly faster to access than otherwise.This option is ignored when the -a option is given.This option should not be used in combination with a replication scheme that uses TABLE DEFINITION CHECKING EXACT, or else replication may no longer work.INLINE variable-length columns cannot successfully be replicated to NOT INLINE columns.

-numThreads n

Specifies the number of threads to use while restoring a database files. If unspecified, ttMigrate uses one thread to restore objects from the data file.
Valid values are 1 through 32.

owner

The owner of a migrate object.

-exactUpgrade

Save or restore the tables in a way that is compatible with a replication scheme that uses TABLE DEFINITION CHECKING EXACT. Use of this option may cause the restored tables to be slightly more compact and slightly faster to access than otherwise.
This option is ignored when the -c or -a options are given.

This option should not be used in combination with a replication scheme that uses TABLE DEFINITION CHECKING RELAXED, or else replication may no longer work.INLINE variable-length columns cannot successfully be replicated to NOT INLINE columns.

-saveAsCharset
charset

Allows you to save an object in a character set other than the database character set. When saving an object, ttMigrate stores it in the database character set by default.

-updateStats

Specifies that ttMigrate should update statistics on restored tables and materialized views. This option is ignored when the -c or -a options are given.
If you specify both -estimateStats and -updateStats, statistics on restored tables are updated, not estimated.

Use of this flag may improve the performance of materialized view restoration and may also improve the performance of queries on the restored tables and views.

-v verbosity

Specifies the verbosity level for messages printed when ttMigrate saves or restores a database. One of:
0 - Shows errors and warnings only.

1 - Prints the name of each table as it is saved or restored.

2 - Prints the name of each table or index as it is saved or restored.

3 (default) - Prints the name of each table or index as it is saved or restored and prints a dot (.) for each 10,000 rows saved or restored.

-v is ignored in List, Long-list, Describe and Long-describe modes.

-V | -version

Prints the release number of ttMigrate and exits.

The following options are available in Restore mode (-r) only:

-autorefreshPaused

Restores cache groups with AUTOREFRESH attribute with autorefresh state paused. Otherwise the state is set to OFF.

-C chkPtFreq

Specifies that ttMigrate should checkpoint the database after restoring every chkPtFreq megabytes of data. A value of zero (the default) specifies that ttMigrate should never checkpoint the database.

-convertCGTypes

Determines the best type mapping from the underlying Oracle tables to TimesTen cached tables using:

- The types of the columns in the Oracle tables.

- The types of the columns stored in the migration file.

- The TimesTen-to-Oracle type mapping rules described above.

If this option is specified with either the-convertTypesToOra or the -convertTypesToTT option, this option takes precedence for cached tables. This option does not impact non-cached tables.

-localhost hostName

Can be used to explicitly identify the name or IP address of the local host when restoring replicated tables.

-noCharsetConversion

Restores data in the database character set, not the tagged character set.
See also -saveAsCharset.

This option may be useful for legacy TimesTen users who may have migrated pre-11.2.2 data into a 11.2.2 or later release of TimesTen as TIMESTEN8 or another character set such as WE8ISO8895P1, when the data is actually in another character set. If, at a later time you wish to have that data interpreted according to its actual character set, use this option to migrate the data into a database that uses the data's actual character set with no character set conversion.

-restorePublicPrivs

Restores privileges that were granted to PUBLIC after the database was created. PUBLIC's privileges are not restored by default.

Modes

Create mode (-c) and Append mode (-a)

In Create mode, ttMigrate saves migrate objects from a TimesTen database into a new binary datafile. If the datafile does not exist, ttMigrate creates it. Otherwise, ttMigrate overwrites the existing file, destroying its contents.

The datafile format used by ttMigrate is independent of any release of TimesTen, so it is possible to use ttMigrate to migrate data from one TimesTen release to another.

In Append mode, ttMigrate appends migrate objects from a TimesTen database to an existing datafile. If the datafile does not exist, ttMigrate creates it.

For each ordinary (non-cached) table, ttMigrate saves:

- The table description: the name and type of each of the table's columns, including primary key and nullability information.

- The table's index definitions: the name of each index and the columns contained in the index. The actual contents of the index are not saved; ttMigrate only saves the information needed to rebuild the index when the table is restored.

- The table's foreign key definitions. You can disable the saving of foreign key definitions using the -nf option.

- The rows of the table. You can disable the saving of rows using the -nr option.

For each cache group, ttMigrate saves the following:

- The cache group definition: the cache group owner and name, the names of all tables in the cache group and any relevant cache group settings, such as the cache group duration.

Note:
After ttMigrate has been used to restore a database, all autorefresh cache groups in the restored database have AUTOREFRESH state set to OFF, no matter how it was set on the source database. After restoring a cache group with ttMigrate -r, reset its AUTOREFRESH STATE to ON by using the ALTER CACHE GROUP statement (this can be done programmatically or with the ttIsql utility.

- All the cached tables in the cache group: the table name, column information, table attributes (propagate or read-only), WHERE clause, if any, foreign key definitions and index definitions.

For each view, ttMigrate saves the following:

- All the same information as a normal table.

- The query defining the view.

For each sequence, ttMigrate saves the following:

- The complete definition of the sequence.

- The sequence's current value.

For each user (except the instance administrator), ttMigrate saves the following:

- User name.

- The user's encrypted password.

- Privileges that have been granted to the user.

For PUBLIC, ttMigrate saves all privileges that have been granted to PUBLIC after database creation.

If there are any replication schemes defined, ttMigrate saves all the of the TTREP tables containing the replication schemes. Replication schemes should have names that are unique from all other database objects. It is not possible to migrate a replication scheme with the same name as any other database object.

Note:
The ttMigrate utility does not save the rows of a cached table into the datafile, even if you have not specified the -nr option. The foreign key definitions of cached tables are always saved, regardless of the use of the -nf option, as they are needed to maintain the integrity of the cache group.

By default, ttMigrate saves all database objects and users in the database to the datafile, including tables, views, cache groups, sequences, users and replication schemes. Alternatively, you can give a list of database objects to be saved on the command line, except for replication schemes. The names in this list can contain the wildcard characters % (which matches one or more characters) and _ (which matches a single character). ttMigrate saves all database objects that match any of the given patterns. You do not need to be fully qualify names: If a name is given with no owner, ttMigrate saves all database objects that match the specified name or pattern, regardless of their owners.

You cannot save cached tables independently of their cache groups. If you list a cached table on the command line without also listing the corresponding cache group ttMigrate issues an error.

Use the -v option to control the information that ttMigrate prints while the save is in progress.

Restore mode (-r)

In Restore mode, ttMigrate restores all database objects from a datafile into a TimesTen database.

For each ordinary (non-cached) table, ttMigrate restores:

- The table, using the original owner, table name, column names, types and nullability and the original primary key.

- The table's foreign keys. You can use the -nf flag to disable the restoration of foreign keys.

- All indexes on the table.

- All rows of the table. You can use the -nr flag to disable the restoration of rows.

For each cache group, ttMigrate restores:

- The cache group definition, using the original cache group owner and name.

- Each cached table in the cache group, using the original table names, column names, types and nullability, the original primary key, the table attributes (PROPAGATE or READONLY), and the WHERE clause, if any.

- The foreign key definitions of the cached tables.

- All the indexes on the cached tables.

Note:
The ttMigrate utility does not restore the rows of cached tables, even if you have not specified the -nr option. The foreign key definitions of the cached tables are always restored, regardless of the use of the -nf option, as they are needed to maintain the integrity of the cache group.

By default, the -exactUpgrade option is set during restore.

By default, ttMigrate restores all tables and cache groups in the datafile. Alternatively, you can list specific tables and cache groups to be restored on the command line. The names in this list must be fully qualified and cannot use wildcard characters.

You cannot restore cached tables independently of their cache groups. If you list a cached table on the command line without also listing the corresponding cache group, then ttMigrate issues an error.

Use the -v option to control the information that ttMigrate prints while the restoration is in progress.

The -inline option may be used to control whether variable length columns are restored as INLINE or NOT INLINE. See "Type specifications" in Oracle TimesTen In-Memory Database SQL Reference. In the default mode, -inlinepreserve, ttMigrate restores all variable-length columns with the same INLINE or NOT INLINE setting with which they were saved. In the other two modes, -inlinedsDefault and -inlinemaxlen, ttMigrate restores variable-length columns equal to or shorter than a threshold length as INLINE, and restores all other variable length columns as NOT INLINE. For-inlinedsDefault, this threshold is the default automatic INLINE length for a TimesTen database. The -inlinemaxlen mode restores variable length columns with a user-specified threshold length of maxlen as INLINE, and all other variable length columns as NOT INLINE, even if they were saved as INLINE. If maxlen is 0, then all variable-length columns are restored as NOT INLINE.

List mode (-l) and Long-list mode (-L)

In List mode, ttMigrate lists the names of database objects in the specified datafile, including cached tables and the replication scheme TTREP tables.

In Long-list mode, ttMigrate lists the names of database objects in the datafile, including cached tables and the replication scheme TTREP tables, along with the number of rows in each table and the index definitions for each table, the query defining each view and the specifications for each sequence.

By default, ttMigrate lists the replication scheme name and all the database objects in the file. Alternatively you can provide a list of names of database objects on the command line. The names in this list must be fully qualified and cannot use wildcard characters.

Describe mode (-d)

In Describe mode, ttMigrate gives a short description for database objects in the specified file.

For each table, ttMigrate lists the table name, the number of rows in the table, and the table's column definitions, primary key and foreign keys. For cached tables, ttMigrate also lists the table attributes (PROPAGATE or READONLY) and the table's WHERE clause, if any.

For views, ttMigrate also lists the query defining the view.

For cache groups, ttMigrate lists the cache group name, the number of tables in the cache group, the cache group duration and describes each cached table in the cache group.

For replication schemes, ttMigrate lists the replication scheme name and all the TTREP replication scheme tables in the same manner as user tables.

By default, ttMigrate describes all the database objects in the file. Alternatively, you can provide a list of names of database objects on the command line. The names in this list must be fully qualified and cannot use wildcard characters.

Long-describe mode (-D)

In Long-describe mode, ttMigrate gives a full description for database objects in the specified file.

For each table, ttMigrate lists the table's name and the number of rows in the table, the table's column definitions, primary key, foreign keys and index definitions. For cached tables, ttMigrate also lists the table attributes (PROPAGATE or READONLY) and the table's WHERE clause, if any.

For cache groups, ttMigrate lists the cache group name, the number of tables in the cache group, the cache group duration and describes each cached table in the cache group.

For sequences, ttMigrate lists all the values used to define the sequence and its current value.

For replication schemes, ttMigrate lists all the TTREP replication scheme tables in the same manner as user tables.

By default, ttMigrate describes all of database objects in the file. Alternatively, you can provide a list of names of database objects on the command line. The names in this list must be fully qualified and cannot use wildcard characters.

TimesTen to Oracle data type conversions

Both TimesTen and Oracle data types are supported in TimesTen 11.2.2 When migrating a database from an earlier version of TimesTen to TimesTen release 11.2.2, you can convert the data types in your database to the default Oracle type mode. This is not required, however.

In replication, the type mode must be the same on both sides of the replication scheme. Therefore you cannot convert the data types as part of an online upgrade, as TimesTen releases previous to 11.2.2 do not support Oracle data types.

Note:
If -convertTypesToOra is specified, and a DECIMAL (or NUMERIC) column exists in the database with a precision > 38, the column is converted to a NUMBER column with a precision of 38, and a warning is returned. If this occurs, and column values exist that overflow or underflow with a precision of 38, those values are reduced or increased to the maximum or minimum possible value for a NUMBER with a precision of 38. Because of this and some other cases, the data type conversion procedures (using -convertTypesToOra and -convertTypesToTT) are not guaranteed to be reversible. Converting types from TT->ORA->TT can result in columns and data which are different from the original in some cases.

To convert from TimesTen data types to Oracle data types, use the -convertTypesToOra option.

The -convertTypesToOra option instructs ttMigrate to make the following type conversions as it saves or restores tables:

From TimesTen Type

To Oracle Type

TT_CHAR

ORA_CHAR

TT_VARCHAR

ORA_VARCHAR2

TT_NCHAR

ORA_NCHAR

TT_NVARCHAR

ORA_NVARCHAR2

TT_DECIMAL

ORA_NUMBER

TT_DATE

ORA_DATE (append 12:00:00 am)

TT_TIMESTAMP

ORA_TIMESTAMP(6)

Note:
Columns of type TT_TINYINT, TT_SMALLINT, TT_INTEGER, TT_BIGINT, BINARY_FLOAT, BINARY_DECIMAL, TT_BINARY, TT_VARBINARY, and TT_TIME are not converted.

For information on data types, see "Data Types" in the Oracle TimesTen In-Memory Database SQL Reference.

Oracle to TimesTen data type conversions

When migrating tables backward from TimesTen release 11.2.2 to an earlier version of TimesTen, you may need to convert Oracle data types to TimesTen data types, as the Oracle data types were not supported in releases before 11.2.2.

To convert from Oracle data types to TimesTen data types, use the -convertTypesToTT option.

The -convertTypesToTT option instructs the ttMigrate utility to make the following type conversions as it saves or restores tables:

From Oracle Type

To TimesTen Type

ORA_CHAR

TT_CHAR

ORA_VARCHAR2

TT_VARCHAR

ORA_NCHAR

TT_NCHAR

ORA_NVARCHAR2

TT_NVARCHAR

ORA_NUMBER

TT_DECIMAL

ORA_DATE

TT_DATE (time portion of date is silently truncated)

ORA_TIMESTAMP

TT_TIMESTAMP

For information on data types, see "Data Types" in the Oracle TimesTen In-Memory Database SQL Reference.

Cache group data type conversions

When restoring a database that contains cache groups from a TimesTen release that is earlier than 7.0, use the -convertCGTypes. option to convert the data type of columns from pre-7.0 types to more clearly map with the data types of the columns in the Oracle database with which the cache group is associated.

The following table describes the type mapping.

Pre-7.0 TimesTen Type

Oracle Type

Converted Type

TINYINT

NUMBER(p,s) when s > 0

NUMBER(p,s)

TINYINT

NUMBER(p,s) when s <= 0

TT_TINYINT

SMALLINT

NUMBER(p,s) when s > 0

NUMBER(p,s)
TT_SMALLINT

SMALLINT

NUMBER(p,s) when s <= 0

TT_SMALLINT

INTEGER

NUMBER(p,s) when s > 0

NUMBER(p,s)

INTEGER

NUMBER(p,s) when s <= 0

TT_INTEGER

BIGINT

NUMBER(p,s) when s > 0

NUMBER(p,s)

BIGINT

NUMBER(p,s) when s <= 0

TT_BIGINT

NUMERIC(p,s)DECIMAL(p,s)

NUMBER

NUMBER

NUMERIC(p,s)DECIMAL(p,s)

NUMBER(x,y)

NUMBER(x,y)

NUMERIC(p,s)DECIMAL(p,s)

FLOAT(x)

NUMBER(p,s)

REAL

Any

BINARY_FLOAT

DOUBLE

Any

BINARY_DOUBLE

FLOAT(x) x <=24

Any

BINARY_FLOAT

FLOAT(x) x >= 24

Any

BINARY_DOUBLE

CHAR(x)

Any

ORA_CHAR(x)

VARCHAR(x)

Any

ORAVARCHAR2(x)

BINARY(x)

Any

TT_BINARY(x)

VARBINARY(x)

Any

TT_VARBINARY(x)

DATE

DATE

ORA_DATE

TIMESTAMP

DATE

ORA_DATE

TIME

DATE

ORA_DATE

Any1

TIMESTAMP(m)

ORA_TIMESTAMP(m)

Note:
Any means the type value does not affect the converted result type.

For information on data types, see "Data Types" in Oracle TimesTen In-Memory Database SQL Reference and "Mappings between Oracle and TimesTen data types" in Oracle In-Memory Database Cache User's Guide.

Return codes

The ttMigrate utility restore (-r) and create (-c) commands return the following exit codes:

0 - All objects were successfully created or restored.

1 - Some objects successfully created or restored. Some objects could not be created or restored due to errors.

2 - Fatal error, for example, could not connect or could not open the data file.

3 - CTRL-C or another signal received during the create or restore operation.

Examples

The following command dumps all database objects from database SalesDS into a file called sales.ttm. If sales.ttm exists, ttMigrate overwrites it.

ttMigrate -c DSN=SalesDS sales.ttm

This command appends all database objects in the SalesDS database owned by user MARY to sales.ttm:

ttMigrate -a DSN=SalesDS sales.ttm MARY.%

This command restores all database objects from sales.ttm into the SalesDS database:

ttMigrate -r DSN=SalesDS sales.ttm

This command restores MARY.PENDING and MARY.COMPLETED from sales.ttm into SalesDS (case is ignored in migrate objects):

ttMigrate -r DSN=SalesDS sales.ttm MARY.PENDINGMARY.COMPLETED

This command lists all migrate objects saved in sales.ttm:

ttMigrate -l sales.ttm

Notes

When migrating backward into a release of the Oracle TimesTen In-Memory Database that does not support features in the current release, TimesTen generally issues a warning and continues without migrating the unsupported features. In a few cases, where objects have undergone conversion, ttMigrate may fail and return an error message. This may be the case with conversions of data types, character sets and primary key representation.

The following restrictions, limitations and suggestions should be considered before preparing to use ttMigrate.

Asynchronous materialized view: When migrating to a previous release, asynchronous materialized views are ignored and TimesTen returns a warning.

Cache groups: In restore mode, the presence of foreign key dependencies between tables may require ttMigrate to reorder tables to ensure that a child table is not restored before a parent table.

When migrating databases that contain cache groups from a previous release of TimesTen to TimesTen 7.0 or greater, you must use the option -convertTypesToOra. See "Cache group data type conversions" for a description of the data type mapping.

Character columns in cached tables must have not only the same length but also the same byte semantics as the underlying Oracle tables. Cache group migration fails when there is a mismatch in the length or length semantics of any of its cached tables.

The connection attribute PassThrough with a non-zero value is not supported with this utility and will return an error.

Character sets: By default, ttMigrate stores table data in the database character set, unless you have specified the -saveAsCharset option. At restore time, conversion to another character set can be achieved by migrating the table into a database that has a different database character set. When migrating data from a release of TimesTen that is earlier than 7.0, TimesTen assumes that the data is in the target database's character set. If the data is not in the same database character set as the target database, the data may not be restored correctly.

When migrating columns with BYTE length semantics between two databases that both support NLS but with different database character sets, it is possible for migration to fail if the columns in the new database are not large enough to hold the values in the migrate file. This could happen, for example, if the source database uses a character set whose maximum byte-length is 4 and the destination database uses a character set whose maximum byte-length is 2.

TimesTen issues a warning whenever character set conversion takes place to alert you to the possibility of data loss due to conversion.

Data type conversions: When migrating data from a pre-7.0 release of TimesTen, you must explicitly request data type conversions, using either the -convertTypesToOra or the -convertTypesToTT options.

ttMigrate saves the length semantic annotation (BYTE or CHAR) of CHAR and VARCHAR columns and restores these annotations when restoring into TimesTen releases that support them. When migrating backward into a TimesTen release that does not support these annotations, columns with CHAR length semantics are converted to BYTE length, but their lengths are adjusted to match the byte length of the original columns. When migrating forward from a release that does not support these annotations, BYTE length semantics are used.

Foreign key dependencies: In restore mode, the presence of foreign key dependencies between tables may require ttMigrate to reorder tables to ensure that a child table is not restored before any of its parents. Such dependencies can also prevent a child table from being restored if any of its parent tables were not restored. For example, when restoring a table A that has a foreign key dependency on a table B, ttMigrate first checks to verify that table B exists in the database. If table B is not found, ttMigrate delays the restoration of table A until table B is restored. If table B is not restored as part of the ttMigrate session, TimesTen prints an error message indicating that table A could not be restored due to an unresolved dependency.

Indexes: TimesTen supports range indexes as primary-key indexes into TimesTen releases that support this feature. When migrating backward into a release that does not support range indexes as primary-key indexes, the primary keys are restored as hash indexes of the default size. When migrating forward from a release that does not support range indexes as primary-key indexes, the primary keys are restored as hash indexes of the same size as the original index.

TimesTen also supports bitmap indexes. When migrating backward into a release that does not support bitmap indexes, ttMigrate converts the bitmap indexes to range indexes.

INLINE columns: When migrating TimesTen tables that contain INLINE variable length columns to a release of TimesTen that is earlier than 5.1, you must explicitly use the -relaxedUpgrade option. Using the default -exactUpgrade option results in an error. The INLINE column attributes are maintained, unless you specify otherwise using the -inline option.

Materialized view logs: TimesTen does not save the content of materialized view logs, only the definition.

Replication: Before attempting a full store migrate of replicated stores, make sure the host name and database name are the same for both the source and destination databases.

System views: TimesTen does not save the definitions or content of system vies during migration.

Other considerations: Because ttMigrate uses a binary format, you cannot use ttMigrate to:

- Migrate databases between hardware platforms.

- Restore data saved with ttBackup or use ttBackup to restore data saved with ttMigrate.

Platforms: You can use ttMigrate to migrate databases between 32- and 64-bit platforms if the two platforms are otherwise exactly the same, including having the same chipset. Follow the examples in the Oracle TimesTen In-Memory Database Installation Guide.

- On Windows, you can use ttMigrate to access databases from any release of TimesTen. On Windows, this utility is supported for all TimesTen Data Manager and Client DSNs.

- On UNIX, the release of ttMigrate must match the release of the database you are connecting to.

It is recommended that you do not run DDL SQL commands while running ttMigrate to avoid lock contention issues for your application.

See also

ttBackup
ttBulkCp
ttRestore

ttmodinstall

Description

Modifies specified settings for an installation.

Required privilege

This utility requires the instance administrator privilege.

Syntax

ttmodinstall {-h | -help | -?}
ttmodinstall {-V | -version}
ttmodinstall -port portNumber
ttmodinstall -tns_admin path
ttmodinstall -enablePLSQL
ttmodinstall -crs

Options

ttmodinstall has the options:

Option

Description

-h
-help

-?

Displays help information.

-crs

Create or modify Oracle Clusterware configuration.
For more information, see "Using Oracle Clusterware to Manage Active Standby Pairs" in Oracle TimesTen In-Memory Database Replication Guide.

-enablePLSQL

Enables PL/SQL in the database.

-port portNumber

Changes the daemon port for the current instance of TimesTen to portNumber. This is useful if you discover that other processes are listening on the port that you assigned to TimesTen at installation time.
Also can be used to assign the port for the TimesTen cluster agent. See "Using Oracle Clusterware to Manage Active Standby Pairs" in Oracle TimesTen In-Memory Database Replication Guide.

-tns_admin path

Sets the value for the TNS_ADMIN environment variable. Specify the directory where the tnsnames.ora file can be found.

-V | -version

Display TimesTen version information.

Examples

To change the port number of the TimesTen instance to 12345, use:

ttmodinstall -port 12345

Notes

You must shut down all TimesTen operations to use this utility. This utility stops and then restarts the TimesTen daemon before making any changes to the instance.

ttRepAdmin

Description

Displays existing replication definitions and monitors replication status. The ttRepAdmin utility is also used when upgrading to a new release of TimesTen, as described in Oracle TimesTen In-Memory Database Installation Guide.

Required privilege

This utility requires the ADMIN privilege.

Syntax

ttRepAdmin {-h | -help | -?}
ttRepadmin {-V | -version}
ttRepAdmin -self -list [-scheme [owner.]schemeName]
{DSN | -connStr connectionString}

ttRepAdmin -receiver [-name receiverName]
[-host receiverHostName] [-state receiverState] [-reset]
[-list] [-scheme [owner.]schemeName]
{DSN | -connStr connectionString}

ttRepAdmin -log {DSN | -connStr connectionString}

ttRepAdmin -showstatus {-awtmoninfo} {DSN | -connStr connectionString}

ttRepAdmin -showconfig {DSN | -connStr connectionString}

ttRepAdmin -bookmark {DSN | -connStr connectionString}

ttRepAdmin -wait [-name receiverName] [-host receiverHostName]
[-timeout seconds] {DSN | -connStr connectionString}

ttRepAdmin -duplicate -from srcDataStoreName
-host srcDataStoreHost
[-localIP localIPAddress] [-remoteIP remoteIPAddress]
[-setMasterRepStart] [-ramLoad] [-delXla]
[-UID userId] [-PWD pwd | -PWDCrypt encryptedPwd]
[-drop { [owner.]table ... | [owner.]sequence |ALL }]
[-truncate { [owner.]table ... | ALL }]
[-compression 0 | 1] [-bandwidthmax maxKbytesPerSec]
[-initCacheDr [-noDRTruncate][-nThreads]]
[-keepCG [-cacheUid cacheUid [-cachePwd cachePwd]]
[-recoveringNode | -deferCacheUpdate]
| -nokeepCG]
[-remoteDaemonPort portNo] [-verbosity {0|1|2}]
[-localhost localHostName]
{destDSN | -connStr connectionString}

ttRepAdmin operations

The ttRepAdmin utility is used for many replication operations. These operations fall into the following categories:

- Help and version information

- Database information

- Subscriber database operations

- Duplicate a database

- Wait for updates to complete

- Replication status

Help and version information

Use this form of ttRepAdmin to obtain help and the current version of TimesTen.

ttRepAdmin {-h | -help | -?}
ttRepadmin {-V | -version}

Option

Description

-h
-help

-?

Display help information.

-V | -version

Display TimesTen version information.

Database information

Use this form of ttRepAdmin to obtain summary information about a database.

ttRepAdmin -self -list [-scheme [owner.]schemeName]
{DSN | -connStr connectionString}

Options

ttRepAdmin -self -list has the options:

Option

Description

DSN

Data source name of a master or subscriber database.

-connStr connection_string

Connection string of a master or subscriber database.

-self

Specified database.

-list

Lists database name, host, port number, and bookmark position.

-scheme [owner.]schemeName]

Name of replication scheme when there is more than one scheme.

Examples

ttRepAdmin -self -list my_dsn

The above syntax prints out information about the replication definition of the database my_dsn.

Subscriber database operations

Use this form of ttRepAdmin to check the status or reset the state of a subscriber (receiver) database.

ttRepAdmin -receiver [-name receiverName]
[-host receiverHostName]
[-state receiverState] [-reset]
[-list] [-scheme [owner.]schemeName]
{DSN | -connStr connectionString}

Options

ttRepAdmin -receiver has the options:

Option

Description

DSN

Data source name of the master database.

-connStr connection_string

Connection string of the master database.

-receiver

Subscriber databases receiving updates from the master. Use -name and -host to specify a specific subscriber database.

-name receiverName

A specific subscriber (receiving) database. The receiverName is the last component in the database path name.

-host receiverHostName

Hostname or TCP/IP address of the subscriber host.

-state start
-state stop

-state pause

Sets the state of replication for the subscriber.
start (default) - Starts replication to the subscriber.

stop - Stops replication to the subscriber, discarding updates.

pause - Pauses the replication agent, preserving updates.

See "Setting the replication state of subscribers" in Oracle TimesTen In-Memory Database Replication Guide for more information.

-reset

Clears the bookmark in the master database log for the latest transaction to be sent to a given subscriber. This option should only be used when the transaction numbering of the master database is changed, such as when the database is re-created using ttMigrate or ttBackup. If the master database is saved and restored using ttBackup and ttRestore, transaction numbering is preserved and this option should not be used.

-list

Lists information about a replication definition.

-scheme [owner.]schemeName]

Specifies the replication scheme name when there is more than one scheme.

Examples

ttRepAdmin -receiver -list my_dsn

The above syntax lists replication information for all the subscribers of the master database, my_dsn.

ttRepAdmin -receiver -name rep_dsn -list my_dsn

The above syntax lists replication information for the rep_dsn subscriber of the master database, my_dsn.

ttRepAdmin -receiver -name rep_dsn -reset my_dsn

The above syntax resets the replication bookmark with respect to the rep_dsn subscriber of the master database. Should only be used when migrating a replicated database with ttMigrate or ttBulkCp.

ttRepAdmin -receiver -name rep_dsn -state Start my_dsn

The above syntax resets the replication state of the rep_dsn subscriber database to the Start state with respect to the master database, my_dsn.

Duplicate a database

Use this form of ttRepAdmin to create a new database with the same contents as the master database.

The following must be true for you to perform the ttRepAdmin -duplicate:

- Only the instance administrator can run ttRepAdmin -duplicate.

- The instance administrator must have the same operating system username on both source and target computer to execute ttRepAdmin -duplicate.

- You must provide the user name and password with the -UID and -PWD options for an internal user with the ADMIN privilege on the source database.

- You must run ttRepAdmin on the target host.

- The DSN specified must be a direct-mode DSN, not a server DSN.

Before running the ttRepAdmin -duplicate command, use ttStatus to be sure that the replication agent is started for the source database.

ttRepAdmin -duplicate -from srcDataStoreName
-host srcDataStoreHost
[-localIP localIPAddress] [-remoteIP remoteIPAddress]
[-setMasterRepStart] [-ramLoad] [-delXla]
-UID userId (-PWD pwd | -PWDCrypt encryptedPwd)
[-drop { [owner.]table ... | [owner.]sequence |ALL }]
[-truncate { [owner.]table ... | ALL }]
[-compression 0 | 1] [-bandwidthmax maxKbytesPerSec]
[-initCacheDr [-noDRTruncate] [-nThreads]]
[-keepCG [-cacheUid cacheUid [-cachePwd cachePwd]]
[-recoveringNode | -deferCacheUpdate]
|-nokeepCG]
[-remoteDaemonPort portNo] [-verbosity {0|1|2}]
[-localhost localHostName]
{destDSN | -connStr connectionString}

Options

ttRepAdmin -duplicate has the options:

Option

Description

-bandwidthmax maxKbytesPerSec

Specifies that the duplicate operation should not put more than maxKbytesPerSec KB of data per second onto the network. A value of 0 indicates that there should be no bandwidth limitation. The default is 0. The maximum is 9999999.

-compression 0 | 1

Enables or disables compression during the duplicate operation. The default is 0 (disabled).

-connStr connection_string

Specifies the connection string of the destination database.

-delXla

Removes all the XLA bookmarks as part of the duplicate operation. Use this option if you do not want to copy the bookmarks to the duplicate database.

destDSN

Indicates the data source name of the destination database.

-drop {[owner.]table ... |[owner.]sequence |ALL

Drops any tables or sequences that are copied as part of the -duplicate operation but which are not included in the replication scheme. The option is ignored if the table is a cache group table.

-duplicate

Creates a duplicate of the specified database using replication to transmit the database contents across the network. See "Duplicating a database" in Oracle TimesTen In-Memory Database Replication Guide.

-from srcDataStoreName

Used with -duplicate to specify the name of the sender (or master) database. The srcDataStoreName is the last component in the database path name.

-host srcDataStoreHost

Defines the hostname or TCP/IP address of the sender (or master) database.

-initCacheDr

Initializes disaster recovery. Must be used with -cacheUid and -cachePwd options.

-keepCG [-cacheUid cacheUid -cachePwd cachePwd] [-recoveringNode | -deferCacheUpdate] | -noKeepCG

-keepCG and -noKeepCG specify whether tables in cache groups should be maintained as cache group tables or converted to regular tables in the target database. The default is -noKeepCG.
cacheUid is the cache administration user ID.

cachePwd is the password for the cache administrator user.

If no password is provided, ttRepAdmin prompts for a password.

-recoveringNode specifies that -duplicate is being used to recover a failed node for a replication scheme that includes an AWT or autorefresh cache group. Do not specify -recoveringNode when rolling out a new or modified replication scheme to a node. If -duplicate cannot update metadatabase on the Oracle database and all incremental autorefresh cache groups are replicated, then updates to the metadata are automatically deferred until the cache and replication agents are started.

-deferCacheUpdate forces the deferral of changes to metadatabase on the Oracle database until the cache and replication agents are started and the agents can connect to the Oracle database. Using this option can cause a full autorefresh if some of the incremental cache groups are not replicated or if -duplicate is being used for rolling out a new or modified replication scheme to a node.

-localhost hostName

Can be used with -duplicate and-setMasterRepStart to explicitly identify the name or IP address of the local host.

-localIP localIPAddress

Specifies the alias or IP (IPv4 or IPv6) address of the local network interface to be used. If not specified, ttRepAdmin chooses any compatible interface.

-noDRTruncate

Used with the -initCacheDr option, -noDRTruncate indicates the number of threads used to truncate the Oracle tables and load the data in the cache into Oracle during the initialization process.

-nThreads n

Used with the -initCacheDr option, -nThreads indicates the number of threads used to truncate the Oracle tables and push the data in the cache into Oracle during the initialization process.

-PWD pwd

The password of the internal user specified in the -UID option.

-PWDCrypt encryptedPwd

The encrypted password of the user specified in the -UID option.

-ramLoad

Keeps the database in memory upon completion of the duplicate operation. This option avoids the unload/reload database cycle to improve the performance of the duplicate operation when copying large databases. After the duplicate option, the RAM Policy for the database is set to manual. Use the ttAdmin utility to make further changes to the RAM policy.

-remoteDaemonPort portNo

The port number of the remote main daemon.
The port number supplied as an argument to this option is used unless the value is zero. In that case the default behavior to determine the port number is used.

The -remoteDaemonPort option cannot be used to duplicate databases that have stores which use automatic port configuration.

-remoteIP remoteIPAddress

Specifies the alias or IP (IPv4 or IPv6) address of the remote or destination network interface to be used. If not specified, ttRepAdmin chooses any compatible interface.

-setMasterRepStart

When used with -duplicate, this option sets the replication state for the newly created database to the Start state just before the database is copied across the network. This ensures that all updates made to the source database after the duplicate operation are replicated to the newly duplicated local database. Any unnecessary transaction log files for the database are removed.

-truncate [owner.]table ...| ALL

Truncates any tables that are copied as part of the -duplicate operation but which are not included in the replication scheme. The option is ignored if the table is a cache group table.

-UID userid

The user ID of a user having the ADMIN privilege on the source database must be supplied. This must be an internal user.

-verbosity {0 | 1 | 2}

Provide details of the communication steps within the duplicate process and reports progress information about the duplicate transfer.
0 (default) - No diagnostics are returned.

1 - Reports details of the duplicate parameters to stdout.

2 - Reports details of the duplicate parameters and details of the duplicate transfer operation to stdout.

Examples

Example 3-1 Duplicating a database

On the source database, create a user and grant the ADMIN privilege to the user:

CREATE USER ttuser IDENTIFIED BY ttuser;
User created.

GRANT admin TO ttuser;

The instance administrator must have the same user name on both instances involved in the duplication. Logged in as the instance administrator, duplicate the ds1 database on server1 to the ds2 database:

ttRepAdmin -duplicate -from ds1 -host "server1"
-UID ttuser -PWD ttuser
-connStr "dsn=ds2;UID=ttuser;PWD=ttuser"

Example 3-2 Duplicating a database with cache groups

Use the -keepCG option to keep cache group tables when you duplicate a database. Specify the cache administration user ID and password with the -cacheuid and -cachepwd options. If you do not provide the cache administration user password, ttRepAdmin prompts for a password.

If the cache administration user ID is orauser and the password is orapwd, duplicate database dsn1 on host1:

ttRepAdmin -duplicate -from dsn1 -host host1 -uid ttuser -pwd ttuser
-keepCG -cacheuid orauser -cacheuid orapwd "DSN=dsn2;UID=;PWD="

The UID and PWD for dsn2 are specified as null values in the connection string so that the connection is made as the current OS user, which is the instance administrator. Only the instance administrator can run ttRepAdmin -duplicate. If dsn2 is configured with PWDCrypt instead of PWD, then the connection string should be "DSN=dsn2;UID=;PWDCrypt=".

Example 3-3 Setting the replication state on the source database

The -setMasterRepStart option causes the replication state in the srcDataStoreName database to be set to the Start state before it is copied across the network and then keeps the database in memory. It ensures that any updates made to the master after the duplicate operation has started are copied to the subscriber.

You can use the -localhost option to identify the local host by host name or IP address. These options ensure that all updates made after the duplicate operation are replicated from the remote database to the newly created or restored local database.

ttRepAdmin -duplicate -from srcDataStoreName -host srcDataStoreHost
-setMasterRepStart -ramLoad
-UID timesten_user -PWD timesten_user]
-localhost localHostName
[destDSN | -connStr connectionString ]

Notes

This utility can duplicate any temporary table definition in a database, but it does not replicate the contents of temporary tables.

You cannot use this utility to duplicate databases across major releases of TimesTen.

Wait for updates to complete

Use this form of ttRepAdmin to assure that all the updates in the log are replicated to all subscribers before call returns.

ttRepAdmin -wait [-name receiverName] [-host receiverHostName]
[-timeout seconds] {DSN | -connStr connectionString}

Options

ttRepAdmin -wait has the options:

Option

Description

DSN

Indicates the data source name of the master database.

-connStr connection_string

Specifies the connection string of the master database.

-wait

Waits for replication to become current before continuing.

-name receiverName

Identifies the database. The database name is the last component in the database path name.

-host receiverHostName

Defines the hostname or TCP/IP address of the subscriber host.

-timeout seconds

Specifies timeout value in seconds. ttRepAdmin returns within this amount of time, even if all updates to subscribers have not been completed.

Examples

ttRepAdmin -wait -name receiverName -host receiverHostName
-timeout seconds -dsn DSN

The above syntax provides a way to ensure that all updates, committed at the time this program was invoked, have been transmitted to the subscriber, receiverName, and the subscriber has acknowledged that all those updates have been durably committed at the subscriber database. The timeout in seconds limits the wait.

Note:
If ttRepAdmin -wait is invoked after all write transaction activity is quiesced at a store (there are no active transactions and no transactions have started), it may take 60 seconds or more before the subscriber sends the acknowledgment that all updates have been durably committed at the subscriber.

ttRepAdmin -wait -dsn DSN

In the above syntax, if no timeout and no subscriber name are specified, ttRepAdmin does not return until all updates committed at the time this program was invoked have been transmitted to all subscribers and all subscribers have acknowledged that all those updates have been durably committed at the subscriber database.

Replication status

Use this form of ttRepAdmin to check the size of the transaction log files, bookmark position, or replication configuration of a master database.

ttRepAdmin -log {DSN | -connStr connectionString}
ttRepAdmin -showstatus {-awtmoninfo} {DSN | -connStr connectionString}
ttRepAdmin -showconfig {DSN | -connStr connectionString}
ttRepAdmin -bookmark {DSN | -connStr connectionString}

Options

The ttRepAdmin monitor operations have the options:

Option

Description

DSN

Indicates the data source name of the master database.

-awtmoninfo

If you have enabled monitoring for AWT cache groups by calling the ttCacheAwtMonitorConfig procedure, you can display the monitoring results by using the this option.
If AWT monitoring is enabled, ttrepadmin -awtmoninfo displays the output:

- TimesTen processing time: The total number of milliseconds spent in processing AWT transaction data since monitoring was enabled.

- Oracle bookmark management time: The total number of milliseconds spent in managing AWT metadata on Oracle since monitoring was enabled.

-connStr connection_string

Specifies the connection string of the master database.

-log

Prints out number and size of transaction log files retained by replication to transmit updates to other databases.

-showconfig

Lists the entire replication configuration.
See "Show the configuration of replicated databases" in Oracle TimesTen In-Memory Database Replication Guide for more information.

-showstatus

Reports the current status of the specified replicated database.
See "Using ttRepAdmin to show replication status" in Oracle TimesTen In-Memory Database Replication Guide for more information.

-bookmark

Reports the latest marker record from where replication must read the log, the most recently created log sequence number, and the latest log sequence number whose record has been flushed to disk.
Bookmarks are not supported if you have configured parallel replication.

See "Show replicated log records" in Oracle TimesTen In-Memory Database Replication Guide for more information.

Result set

If AWT monitoring is enabled, this utility displays the following information in addition to other ttRepAdmin -showstatus output.

- TimesTen processing time: The total number of milliseconds spent in processing AWT transaction data since monitoring was enabled.

- Oracle bookmark management time: The total number of milliseconds spent in managing AWT metadata on Oracle since monitoring was enabled.

- Oracle execute time: The total number of milliseconds spent in OCI preparation, binding and execution for AWT SQL operations since monitoring was enabled. This statistic includes network latency between TimesTen and Oracle.

- Oracle commit time: The total number of milliseconds spent in committing AWT updates on Oracle since monitoring was enabled. This statistic includes network latency between TimesTen and Oracle.

- Time since monitoring was started.

- Total number of TimesTen row operations: The total number of rows updated in AWT cache groups since monitoring was enabled.

- Total number of TimesTen transactions: The total number of transactions in AWT cache groups since monitoring was enabled.

- Total number of flushes to Oracle: The total number of times that TimesTen data has been sent to Oracle.

The output also includes the percentage of time spent on TimesTen processing, Oracle bookmark management, Oracle execution and Oracle commits.

Examples

ttRepAdmin -log DSN

The above syntax reports the number of transaction log files that replication is retaining to transmit updates to other databases. The replication agent retains a transaction log file until all updates in that transaction log file have been successfully transferred to each subscriber database.

ttRepAdmin -showconfig DSN

The above syntax reports the entire replication configuration. It lists all the subscribers for the specified DSN, the names and details of the tables being replicated, and all the subscriptions.

ttRepAdmin -showstatus DSN

The above syntax reports the current state of the database for the specified DSN. The output includes the state of all the threads in the replication agents for the replicated databases, bookmark locations, port numbers, and communication protocols.

ttRepAdmin -bookmark DSN

The above syntax prints out the log sequence numbers of the earliest log record still needed by replication, the last log record written to disk, and the last log record generated.

ttRepAdmin -showstatus -awtmoninfo myDSN

[other -showstatus output]
...
AWT Monitoring statistics
--------------------------
TimesTen processing time : 0.689000 millisecs (0.164307 %)
Oracle bookmark management time : 3.229000 millisecs (0.770027%)
Oracle execute time : 342.908000 millisecs (81.774043 %)
Oracle commit time : 72.450000 millisecs (17.277315 %)
Time since monitoring was started: 8528.641000 millisecs
Cache-connect Operational Stats :
Total Number of TimesTen row operations : 2
Total Number of TimesTen transactions : 2
Total Number of flushes to Oracle : 2

The above syntax and output shows the AWT monitoring status.

Notes

The ttRepAdmin utility is supported only for TimesTen Data Manager DSNs. It is not supported for TimesTen Client DSNs.

You must use the -scheme option when specifying more than one replication scheme, or when more than one scheme exists involving the specified database.

Using SQL configuration, you can create multiple replication schemes in the same database. If there is only one replication scheme, the ttRepAdmin utility automatically determines the scheme. If there is more than one scheme, you must use the ttRepAdmin -scheme option to specify which scheme to use.

When configuring replication for databases with the same name on different hosts, you can indicate which database you wish to operate on by using -host. For example, if all the subscribers have the name DATA, you can set the replication state on host SW1 with:

ttRepAdmin -receiver -name DATA -host SW1 -state start DSN

See also

For a full description of TimesTen Replication, see Oracle TimesTen In-Memory Database Replication Guide.

For upgrade examples, see "TimesTen Upgrades" in Oracle TimesTen In-Memory Database Installation Guide.

ttRestore

Description

Creates a database from a backup that has been created using the ttBackup utility. If the database exists, ttRestore does not overwrite it.

The attributes in the ttRestore connection string can contain any of the first connection or general connection attributes. It can also include the data store attribute LogDir. All other data store attributes are copied from the backup files. This allows the restored database to be relocated.

The ttRestore action is somewhat more powerful than a first connect, as it can move the database. It is somewhat less powerful than creating a new database, as it cannot override the data store attributes, except for the LogDir attribute.

For an overview of the TimesTen backup and restore facility, see "Migration, Backup, and Restoration" in the Oracle TimesTen In-Memory Database Installation Guide.

Required privilege

This utility requires the instance administrator privilege.

Syntax

ttRestore {-h | -help | -?}
ttRestore {-V | -version}
ttRestore [-fname filePrefix] [-noconn] -dir directory
{DSN | -connStr connectionString}
ttRestore -i [-noconn] {DSN | -connStr connection_String}

Options

ttRestore has the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Specifies an ODBC data source name of the database to be administered.

-dir directory

Specifies the directory where the backup files are stored.

-fname filePrefix

Specifies the file prefix for the backup files in the backup directory. The backup files must have been stored in the backup directory with this prefix.
The default value for this parameter is the file name portion of the DataStore parameter of the database's ODBC definition.

-h
-help

-?

Prints a usage message and exits.

-i

Read standard input for the backup data. You cannot use the -dir or -fname options with -i.

-noconn

In order to ensure that the restore was successful, ttRestore connects to the database as a last step. This option disables that last connect. We recommend that you specify this option for best performance. If this option is not specified, the database is loaded into and unloaded from memory.

-V | -version

Prints the release number of ttRestore and exits.

Example

ttRestore -dir /users/pat/TimesTen/backups
-fname FastInsBkup "DSN=FastIns"

To back up a database named origDSN to the directory /users/rob/tmp and restore it to database named restoredDSN, use:

ttBackup -dir /users/rob/tmp -fname restored "dsn=origDSN"
ttRestore -dir /users/rob/tmp -fname restored "dsn=restoredDSN"

The value of fname is the name that you want for the prefix portion of the backup file name.

On UNIX, to restore a tape backup to the FastIns database, use:

dd bs=64k if=/dev/rmt0 | ttRestore -i DSN=FastIns

Notes

The ttBackup utility and the ttRestore utility can be used to backup and restore databases only when the first three numbers of the TimesTen release are the same. For example, you can backup and restore files between releases 11.2.2.2.0 and 11.2.2.3.0. You cannot backup and restore files between releases 11.2.1.9.0 and 11.2.2.3.0. You can use the ttMigrate or ttMigrateCS utility to migrate databases across major releases, operating systems, operating system bit levels or CPU types

Databases containing cache groups can be backed up as normal with the ttBackup utility. However, when restoring such a backup, special consideration is required as the restored data within the cache groups may be out of date or out of sync with the data in the backend Oracle database. See the section on "Backing up and restoring a database with cache groups" in the Oracle In-Memory Database Cache User's Guide for details.

See also

ttBackup
ttBulkCp
ttMigrate

ttSchema

Description

Prints out the schema, or selected objects, of a database. The utility can list the following schema objects that are found in SQL CREATE statements:

- Tables

- Indexes

- Cache group definitions

- Sequences

- Views

- Materialized view logs

- Column definitions, including partition information

- PL/SQL program units

The level of detail in the listing and the objects listed are controlled by options. The output represents a point in time snapshot of the state of a database rather than a history of how the database came to arrive at its current state, perhaps through ALTER statements. An entire database, including data, cannot be completely reconstructed from the output of ttSchema. The output of ttSchema can be played back by the ttIsql utility in order to rebuild the full schema of a database.

On UNIX, this utility is supported for TimesTen Data Manager DSNs. For TimesTen Client DSNs, use the utility ttSchemaCS.

Required privilege

This utility requires no privileges beyond those needed to perform describe operations on database objects.

This utility prints information only about the objects owned by the user executing the utility, and those objects for which the owner has SELECT privileges. If the owner executing the utility has ADMIN privilege, ttSchema prints information about all objects.

Syntax

ttSchema {-h | -help | -?}
ttSchema {-V | -version}
ttSchema [-l] [-c] [-fixedTypes] [-st | -systemTables]
[ -list {all | tables | views | sequences |
cachegroups | repschemes | plsql} [,...] ]
[-plsqlAttrs | -noplsqlAttrs]
[-plsqlCreate |-plssqlCreateOrReplace]
{-connStr connection_string | DSN }
[[owner.]object_name][...]

Options

ttSchema has the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

-c

Compatibility mode. Limits the use of TimesTen-specific and release-specific keywords and extensions. This may be useful if the ttSchema output is being used as input to an older TimesTen release, or to some other database system, such as Oracle.
For this release, -c prevents the INLINE and NOT INLINE keywords from being output.

DSN

Specifies an ODBC data source name of the database from which to get a schema.

-fixedTypes

Uses fully qualified data type names regardless of the current TypeMode value.

-h
-help -?

Prints a usage message and exits.

-l

One per-line listing of objects in the database.

-list {all | tables | views | sequences | cachegroups | repschemes | plsql}[,...]

A comma-delimited (no space after comma) list of objects to generate. Lists only those types of objects specified. Default is -list all.
-list views also displays information about materialized view logs.

[owner.]object_name

Limits the scope of the output to specified database object(s).

-plsqlAttrs |-noplsqlAttrs

Controls whether ttSchema emits ALTER SESSION statements with CREATE statements for PL/SQL program units.
If -plsqlAttrs is specified, ttSchema emits ALTER SESSION statements to set these attributes before emitting a CREATE statement. This output from ttSchema can be fed back into ttIsql (or sqlplus) to create the same procedures, with the same compiler options as were specified in the original database (default).

If -noplsqlAttrs is specified, only the CREATE statement is generated.

-plsqlCreate | -plsqlCreateOrReplace

If -plsqlCreate is specified, ttSchema emits CREATE PROCEDURE, CREATE PACKAGE or CREATE FUNCTION statements for PL/SQL program units.
If -plsqlCreateOrReplace (default) is specified, ttSchema emits CREATE or REPLACE statements.

-st | -systemTables

Include system tables. System tables are omitted by default.

-V | -version

Prints the release number of ttSchema and exits.

Examples

Objects in the orderdsn database are created with these SQL statements:

CREATE TABLE ttuser.customer (
cust_num            INTEGER NOT NULL PRIMARY KEY,
region            CHAR(2) NOT NULL,
name              VARCHAR2(80),
address           VARCHAR2(255) NOT NULL);

CREATE SEQUENCE ttuser.custid MINVALUE 1 MAXVALUE 1000000;

CREATE TABLE ttuser.orders (
ord_num INTEGER NOT NULL PRIMARY KEY,
cust_num INTEGER NOT NULL,
when_placed  TIMESTAMP NOT NULL,
when_shipped TIMESTAMP,
FOREIGN KEY(cust_num) REFERENCES ttuser.customer (cust_num));

CREATE MATERIALIZED VIEW ttuser.order_summary AS
SELECT cust.name, ord.ord_num, count(*) ord_count
FROM ttuser.orders ord, ttuser.customer cust
WHERE ord.cust_num = cust.cust_num
GROUP BY cust.name, ord.ord_num;

Example 3-4 ttSchema for the database

Return the schema for the orderdsn database.

% ttSchema orderdsn
-- Database is in Oracle type mode
create table TTUSER.CUSTOMER (
CUST_NUM NUMBER(38) NOT NULL,
REGION   CHAR(2 BYTE) NOT NULL,
"NAME"   VARCHAR2(80 BYTE) INLINE NOT NULL,
ADDRESS  VARCHAR2(255 BYTE) NOT INLINE NOT NULL,
primary key (CUST_NUM));

create table TTUSER.ORDERS (
ORD_NUM      NUMBER(38) NOT NULL,
CUST_NUM     NUMBER(38) NOT NULL,
WHEN_PLACED  TIMESTAMP(6) NOT NULL,
WHEN_SHIPPED TIMESTAMP(6),
primary key (ORD_NUM),
foreign key (CUST_NUM) references TTUSER.CUSTOMER (CUST_NUM));

create sequence TTUSER.CUSTID
increment by 1
minvalue 1
maxvalue 1000000
start with 1
cache 20;

create materialized view TTUSER.ORDER_SUMMERY as
SELECT CUST.NAME "NAME", ORD.ORD_NUM "ORD_NUM", COUNT(*) "ORD_COUNT"
FROM TTUSER.ORDERS ORD, TTUSER.CUSTOMER CUST WHERE ORD.CUST_NUM =
CUST.CUST_NUM GROUP BY CUST.NAME, ORD.ORD_NUM ;

Example 3-5 Listing specific objects

Return only the materialized views and sequences for the orderdsn database.

% ttSchema -list views,sequences orderdsn
-- Database is in Oracle type mode
create sequence TTUSER.CUSTID
increment by 1
minvalue 1
maxvalue 1000000
start with 1
cache 20;

create materialized view TTUSER.ORDER_SUMMERY as
SELECT CUST.NAME "NAME", ORD.ORD_NUM "ORD_NUM", COUNT(*) "ORD_COUNT"
FROM TTUSER.ORDERS ORD, TTUSER.CUSTOMER CUST WHERE ORD.CUST_NUM =
CUST.CUST_NUM GROUP BY CUST.NAME, ORD.ORD_NUM ;

Example 3-6 Specifying an object

Return the schema information for the orders table in the orderdsn database.

% ttSchema orderdsn ttuser.orders
-- Database is in Oracle type mode
Warning: tables may not be printed in an order that can satisfy foreign key
reference constraints
create table TTUSER.ORDERS (
ORD_NUM      NUMBER(38) NOT NULL,
CUST_NUM     NUMBER(38) NOT NULL,
WHEN_PLACED  TIMESTAMP(6) NOT NULL,
WHEN_SHIPPED TIMESTAMP(6),
primary key (ORD_NUM),
foreign key (CUST_NUM) references TTUSER.CUSTOMER (CUST_NUM));

Example 3-7 Specifying fixed data types

Return the schema information for the orderdsn database, using fixed data type names.

% ttSchema -fixedTypes orderdsn
-- Database is in Oracle type mode
create table TTUSER.CUSTOMER (
CUST_NUM NUMBER(38) NOT NULL,
REGION   ORA_CHAR(2 BYTE) NOT NULL,
"NAME"   ORA_VARCHAR2(80 BYTE) INLINE NOT NULL,
ADDRESS  ORA_VARCHAR2(255 BYTE) NOT INLINE NOT NULL,
primary key (CUST_NUM));

create table TTUSER.ORDERS (
ORD_NUM      NUMBER(38) NOT NULL,
CUST_NUM     NUMBER(38) NOT NULL,
WHEN_PLACED  ORA_TIMESTAMP(6) NOT NULL,
WHEN_SHIPPED ORA_TIMESTAMP(6),
primary key (ORD_NUM),
foreign key (CUST_NUM) references TTUSER.CUSTOMER (CUST_NUM));

create sequence TTUSER.CUSTID
increment by 1
minvalue 1
maxvalue 1000000
start with 1
cache 20;

create materialized view TTUSER.ORDER_SUMMERY as
SELECT CUST.NAME "NAME", ORD.ORD_NUM "ORD_NUM", COUNT(*) "ORD_COUNT" FROM
TTUSER.ORDERS ORD, TTUSER.CUSTOMER CUST WHERE ORD.CUST_NUM = CUST.CUST_NUM
GROUP BY CUST.NAME, ORD.ORD_NUM ;

Notes

The SQL generated does not produce a history of transformations through ALTER statements, nor does it preserve table partitions, although the output gives information on table partitions in the form of SQL comments.

The connection attribute PassThrough with a non-zero value is not supported with this utility and will return an error.

Output is not guaranteed to be compatible with DDL recognized by previous releases of TimesTen.

It is recommended that you do not run DDL SQL commands while running ttSchema to avoid lock contention issues for your application.

ttSize

Description

Estimates the amount of space that a given table, including any views in the database will consume when the table grows to include rows rows. It can be used on existing tables or to estimate table sizes when creating tables. If no owner is specified, the size information is printed for all tables of the given name. The size information includes space occupied by any indexes defined on the table.

The memory required for varying-length columns is estimated by using the average length of the columns in the current table as the average length of the columns in the final table. If there are no rows in the current table, then ttSize assumes that the average column length is one half the maximum column length.

The memory required for LOB columns is estimated by using the average length of the columns in the current table as the average length of the columns in the final table. When no rows are being inserted into the table, computations do not include LOB columns.

The table is scanned when this utility is called. The scan of the table can be avoided by specifying an optional non-NULL frac value, which should be between 0 and 1. This value is used to estimate the average size of varying-length columns. The maximum size of each varying-length column is multiplied by the frac value to compute the estimated average size of VARBINARY or VARCHAR columns. If the frac option is not specified, the existing rows in the table are scanned and the average length of the varying-length columns in the existing rows is used. If frac is not specified and the table has no rows in it, then frac is assumed to have the value 0.5.

Required privilege

This utility requires no privileges beyond those needed to perform select operations on the specified database objects.

Syntax

ttSize {-h | -help | -?}
ttSize {-V | -version}
ttSize -tbl [owner.]tableName [-rows rows] [- frac fraction]
{-connStr connection_string | DSN}

Options

ttSize has the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Specifies the name of a data source to which ttSize should connect to retrieve table information.

-frac fraction

Estimated average fraction of VARBINARY or VARCHAR column sizes.

-h
-help

-?

Prints a usage message and exits.

-rows rows

Specifies the expected number of rows in the table. Space required to store a TimesTen table includes space for the actual data, plus overhead for bookkeeping, dynamic memory allocation and indexes.
TimesTen may consume additional space due to memory fragmentation, temporary space allocated during query execution and space to hold compiled SQL statements.

If this option is omitted, the number of rows in the existing table is used to estimate the space the table takes, or 1 if the table is empty.

-tbl [owner.]tableName

Specifies the name of the table whose definition should be used for size estimation. If the owner is omitted, the login name of the user is tried. If that is not found, the user SYS is used.

-V | -version

Prints the release number of ttSize and exits.

Example

To estimate the space required for a table, create the table in TimesTen, populate it with a sample of representative rows, create desired indexes and execute ttSize with those definitions. For example, to estimate the size of the NAMEID table in the data source FixedDs when it grows to 200,000 rows, execute:

ttSize FixedDs -tbl Nameid -rows 200000

Notes

Another method for estimating size requirements and measuring fragmentation is to use the MONITOR table. (See "SYS.MONITOR" in Oracle TimesTen In-Memory Database System Tables and Views Reference.)

LOB columns are treated similar to var-type columns, except when there are no rows being inserted into the table. The average size computation will not include LOB columns in such cases.

The columns PERM_ALLOCATED_SIZE and PERM_IN_USE_SIZE show the currently allocated size of the database (in KB units) and the in-use size of the database. The system updates this information each time a connection is made or released and each time a transaction is committed or rolled back.

This utility is supported only for TimesTen Data Manager DSNs. It is not supported for TimesTen Client DSNs.

ttStatus

Description

Displays information that describes the current state of TimesTen. The command displays:

- State of the TimesTen daemon process and all subdaemon processes.

- Names of all existing TimesTen databases.

- Number of users currently connected to each TimesTen database.

- The RAM, cache agent and replication policies.

- TimesTen cache agent status.

- The status of PL/SQL.

- The key and address of the shared memory segment used by TimesTen.

- The address, key and ID of the shared memory segment used by PL/SQL.

- Whether the TimesTen instance is accessible by a specified operating system group or accessible by anyone. For more details, see the daemon options in the "Managing TimesTen daemon options" in Oracle TimesTen In-Memory Database Operations Guide.

- Miscellaneous status information.

If you specify a connection string or DSN, ttStatus outputs only the information for the specified database.

Required privilege

This utility requires no privileges.

Syntax

ttStatus {-h | -help | -?}
ttStatus {-V | -version}
ttStatus [-v] [-r secs] [-[no]pretty]
ttStatus [-r secs] [-[no]pretty] {DSN | -connStr connection_string | dspath}

Options

ttStatus has the options:

Option

Description

-h
-help

-?

Prints a usage message and exits.

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Indicates the ODBC data source name of the database for which to get a status.

-dsn DSN

Specifies the DSN for which you want status. If no DSN is specified, shows the status of all connections to the data store.

-[no]pretty

With [no], indicates that pretty formatting is not used. The default is pretty formatting, which uses the values of the ConnectionName connection attribute.

-r secs

Allows ttStatus to continue running. Updates status report every secs seconds.

-V | -version

Prints the release number of ttStatus and exits.

-v

Prints detailed information that is useful for TimesTen customer support.

Sample output

When you invoke the command, a report that describes the current state of the system is displayed to stdout. The following is sample output:

TimesTen
status report as of Thu Oct 7 19:15:41 2011

Daemon pid 26622 port 4133 instance tt1122_32
No TimesTen server running

------------------------------------------------------------------------
Data store /scratch/timesten_user/rdbms
There are 7 connections to the data store
Data store is in shared mode
Shared Memory KEY 0x13014429 ID 80347138
PL/SQL Memory KEY 0x14014429 ID 80379907 Address 0x2345678900000000
Type            PID     Context     Connection Name              ConnID
Process         26743   0x08117148  rdbms                             1
Subdaemon       26626   0x080bdfa8  Worker                         2042
Subdaemon       26626   0x08159228  Flusher                        2043
Subdaemon       26626   0x081c8850  Monitor                        2044
Subdaemon       26626   0x08217c10  HistGC                         2045
Subdaemon       26626   0x08266fd0  Aging                          2046
Subdaemon       26626   0x082b6390  Checkpoint                     2047
Replication policy  : Manual
Cache agent policy  : Manual
Access control enabled.
PL/SQL enabled.

End of report

When you invoke the command with the -pretty option, a report that describes the current state of the system is displayed to stdout. The following is sample output:

Data store /ds0/timesten_user/sample
There are 7 connections to the data store
Data store is in shared mode
Shared Memory KEY 0x13014429 ID 80347138
PL/SQL Memory KEY 0x14014429 ID 80379907 Address 0x2345678900000000
Type            PID     Context             Connection Name      ConnID
Process        29508   0x00000001001c6680  rdbms                     1
Process         26743   0x08117148  rdbms                             1
Subdaemon       26626   0x080bdfa8  Worker                         2042
Subdaemon       26626   0x08159228  Flusher                        2043
Subdaemon       26626   0x081c8850  Monitor                        2044
Subdaemon       26626   0x08217c10  HistGC                         2045
Subdaemon       26626   0x08266fd0  Aging                          2046
Subdaemon       26626   0x082b6390  Checkpoint                     2047

Replication policy  : Manual
Cache agent policy : Manual
Access control enabled.
PL/SQL enabled.

Notes

While primarily intended for use by TimesTen customer support, this information may be useful to system administrators and developers.

This utility is supported only where the TimesTen Data Manager is installed.

See also

ttAdmin

ttSyslogCheck (UNIX)

Description

Determines if the system's /etc/syslog.conf file is properly configured for TimesTen. The TimesTen Data Manager uses syslog to log a variety of progress messages. It is highly desirable to configure syslog so that all TimesTen messages are written to disk in a single disk file. The ttSyslogCheck utility examines the syslog configuration (in /etc/syslog.conf) to verify that it is properly configured for TimesTen.

If syslog is properly configured, ttSyslogCheck displays the name of the file that TimesTen messages are logged to and exits with exit code 0. If syslog is not properly configured, ttSyslogCheck displays an error message and exits with code 1.

Required privilege

This utility requires no privileges.

Syntax

ttSyslogCheck {-h | -help | -?}
ttSyslogCheck {-V | -version}
ttSyslogCheck [-facility name]

Options

ttSyslogCheck has the options:

Option

Description

-h
-help

-?

Prints a usage message and exits.

-facility name

Specifies the syslog facility name being used for message logging.

-V | -version

Prints the release number of ttSyslogCheck and exits.

Note

This utility is supported only where the TimesTen Data Manager is installed.

ttTail

Description

Fetches TimesTen internal trace information from a database and displays it to stdout. By default, TimesTen generates no tracing information. See "ttTraceMon" for more information.

Required privilege

This utility requires the ADMIN privilege.

Syntax

ttTail {-h | -help | -?}
ttTail {-V | -version}
ttTail [-f] {-connStr connection_string | DSN}

Options

The ttTail utility supports the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Indicates the ODBC data source name of the database from which to get a trace.

-f

When the end of the trace is reached, ttTail does not terminate but continues to execute, periodically polling the database's trace buffer to retrieve and display additional TimesTen trace records. For example, this is useful for generating a display of trace data that is updated in real time.

-h-help
-?

Prints a usage message and exits.

-V | -version

Prints the release number of ttTail and exits.

Example

ttTail MyDatastore

Notes

While primarily intended for use by TimesTen customer support, this information may be useful to system administrators and developers.

This utility is supported only where the TimesTen Data Manager is installed.

ttTraceMon

Description

The ttTraceMon utility lets you enable and disable the TimesTen internal tracing facilities.

Tracing options can be enabled and disabled separately for each database. Each database contains a trace buffer into which messages describing TimesTen internal operations can be written. By default, tracing is disabled. However, it can be enabled using this utility.

The ttTraceMon utility provides subcommands to enable, disable, dump and manipulate trace information. ttTraceMon can be executed interactively (multiple subcommands can be entered at a prompt) or not interactively (one subcommand can be specified on the ttTraceMon command line).

When executed interactively, ttTraceMon prompts for lines of text from standard input and interprets the lines as trace commands. You can provide multiple trace commands on the same line by separating them with semicolons. To exit ttTraceMon, enter a blank line.

In interactive mode, you can redirect ttTraceMon command output to a file:

ttTraceMon connection_string >filename

Component names are case-insensitive. Some commands (dump, show and flush) allow you to list many components and operate on each one. For each subcommand, if you do not list components, the utility operates on all components.

For a description of the components available through this utility and a description of the information that ttTraceMon returns for each, see "Using the ttTraceMon utility" in Oracle TimesTen In-Memory Database Troubleshooting Guide.

Required privilege

This utility requires the ADMIN privilege.

Syntax

ttTraceMon {-h | -help | -?}
ttTraceMon {-V | -version}
ttTraceMon [-e subcommand] {-connStr connection_string | DSN}

Options

ttTraceMon has the options:

Option

Description

-connStr connection_string

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

Indicates the ODBC data source name of the database from which to get trace information.

-e subcommand

Causes the subcommand to be executed against the specified database. If the subcommand consists of more than one word, enclose it in double quotes. For example:

ttTraceMon -e "show err" SalesData

Once the subcommand is complete, ttTraceMon exits. If -e is not specified, ttTraceMon starts in interactive mode, reading commands from stdin and displaying results to stdout.

-h
-help

-?

Prints a usage message and exits.

-V | -version

Prints the release number of ttTraceMon and exits.

Subcommands

ttTraceMon can be called with the following subcommands:

Command

Description

components

List the names and internal identifiers of all components.
For a description of the components available through this utility and a description of the information that ttTraceMon returns for each, see "Using the ttTraceMon utility" in Oracle TimesTen In-Memory Database Troubleshooting Guide.

connection {all | self | connectionNum} [on |off]

Turn tracing on/off for specified connection. At database creation, tracing is "on" for all connections. The value for connectionNum is the connection slot number or the first number in the transaction ID.

dump

Prints all trace records currently buffered.Requires SELECT privileges or database object ownership.

dump comp

Prints all trace records for component comp.Requires SELECT privileges or database object ownership.

flush

Discards all buffered trace records.

flush comp

Discards all buffered trace records for component comp.

help

Prints a summary of the trace commands.

level comp n

Sets the trace level for component comp to n.Requires ADMIN privileges or database object ownership.

outfile file

Prints trace output to the specified file. The file may be any of 0, stdout, stderr, or a file name. On Windows, the file name must be in short 8.3 format. Printing is turned off when file is 0. TimesTen continues to buffer traces as usual, and they are accessible through other utilities like ttTail. If no file is specified, prints the current outfile setting.

show

Shows all the trace levels in force.

show comp

Shows the trace level for component comp.

Notes

Because tracing can degrade performance significantly, we recommend that you enable tracing only to debug problems. While primarily intended for use by TimesTen customer support, this information may be useful to system administrators and developers.

This utility is supported only where the TimesTen Data Manager is installed.

ttuser

Description

Prompts for a password and returns an encrypted password. You can then include the output in a connection string or as the value for the PWDCrypt connection attribute in an ODBCINI file.

Required privilege

This utility requires no privileges.

Syntax

ttuser {-h | -help | -?}
ttuser {-V | -version}
ttuser -pwdcrypt

Options

The ttuser utility supports the options:

Option

Description

-h
-help

-?

Prints a usage message and exits.

-pwdcrypt

Generates an encrypted password value for the PWDCrypt connection attribute.

-V | -version

Prints the release number of ttuser and exits.

ttVersion

Description

The ttVersion utility lists the TimesTen release information, including: number, platform, instance name, instance admin, instance home directory, daemon home directory, port number and build timestamp. You can specify various levels of output:

- You can specify ttVersion with no options to list abbreviated output.

- You can specify the -m option to list enhanced output.

- You can specify an attribute to list output only for a specific attribute.

Required privilege

This utility requires no privileges.

Syntax

ttVersion [-m] [attribute] [...]

Options

ttVersion has the option:

Option

Description

-m

Generates computer-readable enhanced output. If not specified and no attribute is specified, abbreviated information is output.

attribute

Generates information only about the specified attribute. You can specify multiple attributes. When you specify more than one attribute, the output is displayed with an equal sign after the attribute name.

Attributes

ttVersion has these attributes:

Attribute

Description

patched

Lists yes or no, indicating whether the release has been patched.

product

Lists the name of the product.

major1

The first number of the five-place release number.

major2

The second number of the five-place release number.

major3

The third number of the five-place release number.

patch

The fourth number of the five-place release number.

portpatch

The fifth number of the five-place release number.

version

All five numbers of the release number, separated by periods.

shortversion

The first three numbers of the five-place release number.

numversion

The first four numbers of the five-place release number, represented by three digits for each place.

bits

Lists 32 or 64 to indicate the bit-level of the operating system for which this release is intended.

os

The operating system for which this release is intended

buildstamp

A number indicating the specific build.

buildtime

The UTC time the release was built, for example: 2011-06-19T17:21:59Z

clientonly

Lists yes or no to indicate if the release is a client-only release

instance

The name of the instance, for example: tt1121_32.

effective_port

The number of the port on which the main daemon listens.

orig_port

The original number of the port on which the main daemon listened.

instance_admin

The user name of the instance administrator.

orig_insthome

The path that indicates the location of the instance.

effective_daemonhome

The path to the home of the daemon for the specific instance.

orig_daemonhome

The path to the original home of the daemon.

plsql

Indicates if PL-SQL is configured for this instance. 0 indicates that PL-SQL is not configured. 1 indicates that PLSQL is configured. The value corresponds with the setting of the PLSQL connection attribute.

group_name

The name of the instance group.

Output

ttVersion produces the following sample output.

TimesTen Release 11.2.2 (32 bit Linux/x86) (tt1121_32:53384) 2011-05-26T23:00:04Z
Instance admin: terry
Instance home directory: spider/terry/TimesTen/tt1121_32
Daemon home directory: spider/terry/TimesTen/tt1121_32/srv/info

ttVersion -m produces the following sample output. Most of the entries only appear for patch releases.

patched=yes
product=TimesTen
major1=11
major2=2
major3=1
patch=1
portpatch=0
version=11.2.2.1.0
shortversion=1122
numversion=110200010100
bits=32
os=Linux/x86
buildtstamp=1243378804
buildtime=2011-05-26T23:00:04Z
clientonly=no
instance=tt1121_32
effective_port=53384
orig_port=53384
instance_admin=terry
effective_insthome=/spider/terry/ttcur/TTBuild/linux86_dbg/tt1121_32
orig_insthome=/spider/terry/ttcur/TTBuild/linux86_dbg/tt1121_32
effective_daemonhome=/spider/terry/ttcur/TTBuild/linux86_dbg/tt1121_32/info
orig_daemonhome=/spider/terry/ttcur/TTBuild/linux86_dbg/tt1121_32/info
plsql=0
groupname=timesten

ttXactAdmin

Description

The ttXactAdmin utility lists ownership, status, log and lock information for each outstanding transaction. The ttXactAdmin utility also allows you to heuristically commit, abort or forget an XA transaction branch.

Applications should monitor log holds and the accumulation of log files. For more information, see "Monitoring accumulation of transaction log files" in the Oracle TimesTen In-Memory Database Operations Guide.

Required privilege

This utility requires various privileges depending on which options are entered on the command line. See the description of the options to determine which privilege is needed, if any.

Syntax

ttXactAdmin {-h | -help | -?}
ttXactAdmin {-V | -version}
ttXactAdmin [-v verbosity] [-lsn] [-mt maxTrans] [-ml maxLocks] [-pid pid]
[-xact xid] [-tbl [owner.]tableName][-row rowid] [-interval seconds]
[-count iterations] {DSN | -connstr connectionString}
ttXactAdmin -latch [-interval seconds] [-count iterations]
{DSN | -connstr connStr}
ttXactAdmin -latchstats clear | off |on | [show] [-interval seconds]
[-count iterations] {DSN | -connstr connectionString}
ttXactAdmin -connections [-pid pid] [-interval seconds]
[-count iterations] {DSN | -connstr connStr}
ttXactAdmin -xactIdRollback xid {DSN | -connstr connStr}
ttXactAdmin {-HCommit xid | -HAbort xid | -HForget xid} {DSN | -connstr connStr}

Options

ttXactAdmin has the options:

Option

Description

-connections

Shows all current connections to the database. When run with the -connections option, ttXactAdmin itself does not establish a true connection to the database, and requires no latches. This can be useful when diagnosing frozen systems.
This option requires ADMIN privileges.

-connStr connectionString

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

-count iterations

Generate the report iterations times. If no-interval option is specified, an interval of 1 second is used.

DSN

Indicates the ODBC data source name of the database to be administered.
This option requires ADMIN privileges.

-h
-help

-?

Prints a usage message and exits.

-HAbort xid

Heuristically abort an XA transaction branch in TimesTen. The specified transaction ID must be the local TimesTen TransID.
This option requires ADMIN privileges or ownership of the specified transactions.

-HCommit xid

Heuristically commit an XA transaction branch in TimesTen. The specified transaction ID must be the local TimesTen TransID.
This option requires ADMIN privileges or ownership of the specified transactions.

-HForget xid

Heuristically forget an XA transaction branch in TimesTen. The specified transaction ID must be the local TimesTen TransID.
This option requires ADMIN privileges or ownership of the specified transactions.

-interval seconds

Repeat the generation of the report, pausing the indicated number of seconds between each generation. If no -count option is specified, repeat forever.

-latch

This option is to be used by TimesTen Customer Support only. Shows only the latch information for the database specified.

-latchstats[clear | off | on | show]

This option is to be used by TimesTen Customer Support only. Performs the requested latchstat operation.
This option requires ADMIN privileges.

All other options are ignored when -latchstats is used.

clear - Resets all latchstat information to zero.

off - Turns off collection of latchstats.

on - Turns on collection of latchstats.

show (default) - Shows the latch information, including access counts and other stats.

-ml maxLocks

Maximum number of locks per transaction. Default is 6000.

-mt maxTrans

Specifies the maximum number of transactions to be displayed. The default is all outstanding transactions.

-pid pid

Displays only transactions started by the process with the specified pid. On Linux, it is the pid of the thread that opens the connection.
This option requires ADMIN privileges or ownership of the specified transactions.

-row rowid

Displays lock information for the specified row.
This option requires ADMIN privileges or database object ownership.

-tbl [owner.]tableName

Displays lock information for the specified table.
This option requires ADMIN privileges or ownership of the specified table.

-V | -version

Prints the release number of ttXactAdmin and exits.

-v verbosity

Specifies the verbosity level. One of:
0 - Does not display the names of the tables for row locks. In this case, ttXactAdmin runs faster.

1 (default) - Displays the names of the tables for row locks.

-xact xid

Displays information for the specified transaction, including its log hold LSN.In the output, the field "Last ID" is a set of two sequence numbers. If the sequence numbers did not change in an interval, then no log record was written by the transaction during that interval.
This option requires ADMIN privileges or ownership of the specified transactions.

-xactIdRollback xid

Allows you to roll back a transaction. This may be particularly useful for long running transactions. This parameter xid represents the transaction ID.This stops any currently executing operations on behalf of that transaction and then rolls back the transaction in TimesTen.
If there is currently a checkpoint in process when the rollback is requested, TimesTen terminates the checkpoint operation.This command does not stop IMDB Cache operations on Oracle. Operations include passthrough statements, flushing, manual loading, manual refreshing, synchronous writethrough, propagating, and dynamic loading.

This option requires ADMIN privileges or ownership of the specified transactions.

Output

ttXactAdmin produces the following output:

Column

Description

Program File Name

The executable file name of the process that owns the transaction.

PID

The process ID of the application that owns the transaction. On Linux, the PID of the thread that opens the connection.

Context

The internal identifier that distinguishes between multiple connections to the database made by a single multithreaded process.

TransId

The unique identifier for the transaction used internally by TimesTen. The identifier has two parts.
The first part is a relatively small value (less than 2048), used to identify the connection of the program executing the transaction.

The second part is a potentially large value (an unsigned integer), and is used to discriminate between successive uses of the same first part. (The value wraps around if necessary.) Thus, identifiers 4.100 and 4.200 cannot be present at the same time. If 4.100 is seen, and then 4.200, this indicates that transaction 4.100 has completed (committed or rolled back).

TransStatus

Current status of the transaction, one of:
Active - Active transaction.

Aborting - A transaction is in the process of aborting. See Notes for more information.

Committing - Committing transaction, locks are being released.

Ckpointing - A transaction doing checkpoint.

Rep-Wait-Return - Replicated transaction waiting Return Receipt/Commit.

Idle - A transaction branch currently not accessing data.

Prepared - Prepared transaction branch.

Heur-Committed - Heuristically committed transaction branch.

Heur-Aborted - Heuristically aborted transaction branch.

Propagating - TimesTen transaction waiting for Oracle to commit.

Resource

The type of the lock being requested:
Row - Row-level lock.

HashedKey - A lock held on a key value of a hash index; acquired when an operation requires a hash index to be updated.

Table - Table-level lock.

EndScan - End of table or range scan lock.

Database - Database-level lock.

Command - Command lock.

Prepare - Lock acquired while preparing commands.

GrpComm - Group commit lock.

ReplHold - Lock for replication hold.

XlaHold - Lock for XLA hold.

ResourceId

A unique identifier of each unique resource. The identifier is displayed in hexadecimal format with a few exception. Table and CompCmd are shown as decimal values. Row locks are shown in the ROWID character format.

Mode

A value used to determine the level of concurrency that the lock provides:
S - Shared lock in serializable isolation.

Sn - Shared lock in non-serializable isolation.

U - Update lock in serializable isolation.

Un - Update lock in non-serializable isolation.

En - End-of-scan lock for non-serializable isolation.

IRC - Intention shared lock in non-serializable isolation.

IS - Intention shared lock in serializable isolation.

IU - Intention update lock in serializable isolation.

IUn - Intention update lock in non-serializable isolation.

IX - Intention exclusive lock in serializable isolation.

IXn - Intention exclusive lock non-serializable isolation.

SIX - Shared lock with intent to set an exclusive lock in serializable isolation.

SIXn - Shared lock with intent to set an exclusive lock non-serializable isolation.

X - Exclusive lock.

Xn - Exclusive lock in non-serializable isolation.

W - Update, insert or delete table lock.

XNi - Next lock for inserting into tables or non-unique index.

NS - Table lock in read-committed isolation that conflicts with all table locks in serializable isolationLock "0" means the blocker is still in the waiting list.

HMode

The mode in which the competing transaction is holding the lock which the waiting transaction is requesting.
See "Mode" in this table for concurrency level descriptions.

RMode

Shows the mode in which the waiting transaction has requested to hold the lock. See "Mode" in this table for concurrency level descriptions.

HolderTransId

The identifier of the transaction with which the waiting transaction is in contention.

Name

The name of the table that the lock is being held on or within.

Example

The following command displays all locks in the database:

ttXactAdmin -connstr DSN=demodata

Outstanding locks

PID   Context  TransId     TransStatus Resource  ResourceId         Mode Name
Program File Name: localtest
10546 0x118e28 2047.000003 Active      Table     411104             IS  SYS.TABLES
Table     416480             IXn TEST1.TAB1
Row       BMUFVUAAABQAAAAGTD Sn  SYS.TABLES
Hashed Key 0x69cf9c36        Sn  SYS.TABLES
Database   0x01312d00        IX
Row       BMUFVUAAABQAAAAGzD Xn  TEST1.TAB1
Program File Name: /users/smith/demo/XAtest1
XA-XID: 0xbea1-001b238716dc35a7425-64280531947e1657380c5b8d
1817 0x118e28 2046.000004 Active       Table    416480              IS  TEST1.TAB1
CompCmd  21662408            S
Database 20000000            IS
Row      BMUFVUAAABQAAAAJzD  Sn  TEST1.TAB1
Program File Name: /users/smith/demo/XAtest2
XA-XID: 0xbea1-001c99476cf9b21e85e1-70657473746f7265506f6f6c
27317 0x118e28 2045.000005 Prepared    Table  411104             IS   SYS.TABLES
Table  416816             IXn  TEST1.TAB2
Row    BMUFVUAAABQAAAAMzD Sn   SYS.TABLES
Database   0x01312d00     IX
Hashed Key 0x67fe3852     Sn   SYS.TABLES
Row    BMUFVUAAABQAAAAHTE Xn   TEST1.TAB2
Program File Name: /users/smith/demo/Reptest
27589 0x118e28 2044.000006 Rep-Wait-Return
Awaiting locks
PID  Context  TransId     Resource ResourceId RMode HolderTransId HMode Name
Program File Name: /users/smith/demo/XAtest1
1817 0x118e28 2046.000004 Row BMUFVUAAABQAAAAPTD  Sn  2047.000003   Xn  TEST1.TAB1

The following command displays all locks for transaction 2045.000005:

ttXactAdmin -xact 2045.000005 -connstr DSN=demodata
PID   Context  TransStatus 1stLSN    LastLSN  Resource ResourceId Mode Name
Program File Name: /users/smith/demo/XAtest2
XA-XID: 0xbea1-001c99476cf9b21e85e1-70657473746f7265506f6f6c
27317 0x118e28 Prepared    0.0116404 0.0116452 Table 411104         IS  SYS.TABLES
Table   416816         IXn TEST1.TAB2
Row BMUFVUAAABQAAAAGzE Sn  SYS.TABLES
Database 0x01312d00    IXn
Hashed Key 0x67fe3852  Sn SYS.TABLES
Row BMUFVUAAABQAAAAKzE Xn TEST1.TAB2

To display all the connections to the database:

$ ttXactAdmin -connections sample
2006-09-10 10:26:33
/datastore/terry/sample
TimesTen Release 11.2.2.0.0

ID   PID    Context            Name           Program        State TransID UID
1    29508  0x00000001001c6680 myconnection   ttIsql         Run   1.23    TERRY
2044 29505  0x0000000100165290 Worker         timestensubd   Run           TERRY
2045 29505  0x00000001001df190 Flusher        timestensubd   Run           TERRY
2046 29505  0x000000010021cc50 Monitor        timestensubd   Run           TERRY
2047 29505  0x0000000100206730 Checkpoint     timestensubd   Run           TERRY
5 connections found

Notes

If the transaction specified in the command is not an XA transaction branch but a TimesTen local transaction, no XA-XID are displayed. The XA-XID is a C structure that contains a format identifier, two length fields and a data field. The data field consists of at most two contiguous components: a global transaction identifier (gtrid) and a branch qualifier (bqual). The two length fields specify the number of bytes (1-64) in gtrid and bqual respectively. For more details, refer to the X/Open publication: Distributed Transaction Processing: The XA Specification (c193).

For databases, TimsTen only holds S locks when the isolcation mode is serializable. For commands, S only means "shared" lock, and can be held in either serializable or read-committed isolation modes.Under RMode, awaiting transactions are sorted by PID and Context. The listing does not reflect the order of the lock requests.

A lock request with an RMode compatible with the HMode of the lock holder can be waiting because there is another lock request with an incompatible mode ahead of the compatible request in the lock request queue.

A transaction can have the status Aborting for one of these reasons:

- A user application requested rollback after doing a large amount of work.

- An application with autocommit tried a statement that could not be completed and it is being undone.

- Another call to ttXactAdmin caused a transaction to rollback.

- A process died with work in progress and that work is being undone.

ttXactLog

Description

Displays a formatted dump of the contents of a TimesTen transaction log. It is designed to be used by TimesTen customer support to diagnose problems in the log or database. A loss of data can occur with certain options such as -tr, therefore only use this tool if you have been asked to do so by a TimesTen customer support representative.

Required privilege

This utility requires the ADMIN privilege.

Syntax

ttXactLog {-h | -help | -?}
ttXactLog {-V | -version}
ttXactLog [-v verbosity] [-m maxChars] [-s] [-t] [-b blkID]
[-l1 lfn.lfo [-l2 lfn.lfo]] [-r recType] [...] [-tr dir]
[-lb] [-headers recs] [-logdir dir]
{-connStr connection_string | DSN | dspath}

Options

ttXactLog has the options:

Option

Description

-b blkID

Restricts log records to those accessing this block, plus any transaction records.

-connStr connectionString

An ODBC connection string containing the name of the database, the server name and DSN (if necessary) and any relevant connection attributes.

DSN

The ODBC source name of the database for which to display the transaction log.

dspath

The fully qualified name of the database. This is not the DSN associated with the connection but the fully qualified database path name associated with the database as specified in the DataStore= parameter of the database's ODBC definition.
For example, for a database consisting of files/home/payroll/2011.ds0, /home/payroll/2011.ds1 and several transaction log files /home/payroll/2011.logn,dspath is /home/payroll/2011.

-h
-help

-?

Prints a usage message and exits.

-headers records

Prints one header for every records records. A value of 0 disables headers entirely.

-lb

Connects to the database and prints out the log buffer. Contents of the transaction log files are not printed. Requires SELECT privileges or database object ownership.

lfn.lfo

Transaction log file number (lfn) and transaction log file offset (lfo) for a log record.

-l1

Considers this log record only (unless an -l2 argument is present).

-l2

Considers records between -l1 and -l2, inclusive.

-logdir dir

Specifies the directory where the database's transaction log files reside. If -logdir is not specified, ttXactLog uses the directory path portion of the value supplied in dspath.

-m maxChars

Maximum number of characters printed for binary items (for -v 3) only (defaults to 4000).

-r recType

Considers only records of the specified type. This option may be used multiple times to specify a list of desired log record types. recType is case-sensitive.

-s

Prints summary information. Requires SELECT privileges or database object ownership.

-t

Only reads transaction log file tail (from start of last checkpoint transaction log file or, if no checkpoint, the most recent transaction log file).

-tr dir

Truncates all log records in the directory at the LWN boundary. The original transaction log files are moved to the directory dir.

-V | -version

Prints the release number of ttXactLog and exits.

-v verbosity

Specifies the verbosity level. One of:
0 - Print only summary log information (if -s specified).

1 (default) - Print log record headers too.

2 - Print log record bodies too, except long data.

3 - Print full log records (see -m option).

Example

ttXactLog -v 3 -m 100 /users/pat/TimesTen/Daily/F112697SS

Note

This utility is supported only where the TimesTen Data Manager is installed.

4 System Limits

The following sections list all TimesTen system limits and defaults.

- System limits and defaults

- Limits on number of open files

- Path names

System limits and defaults

Specific operating system limits may take precedence over these values. For more information, see "Installation prerequisites" in Oracle TimesTen In-Memory Database Installation Guide.

Description

32-bit Value

64-bit Value

Maximum number of subscriber databases in a replication scheme that is not an active standby pair.

128

128

Maximum number of propagators in a replication scheme. Each propagator can have the maximum number of subscribers.

128

128

Maximum number of subscriber databases in an active standby pair

127

127

Minimum database size (bytes). Size includes both the permanent and temporary space required to perform operations on the database.

32 MB

32 MB

Maximum length for a fixed-length column (bytes).

8,300

8,300

Maximum number of columns in a table.

1,000

1,000

Maximum number of columns in an ORDER BY clause.

1,000

1,000

Maximum number of columns in a GROUP BY clause.

1,000

1,000

Maximum cumulative length of a row's fixed-length columns (bytes).

32,768

32,768

Maximum number of rows in a table.

2^28 = 268,435,256

(2^31-1) = 2,147,483,647

Maximum length for a varying-length column (bytes).

2^22 = 4,194,304

2^22 = 4,194,304

Maximum length for a replicated column

4 MB
16MB for columns with BLOB type

4 MB
16MB for columns with BLOB type

Maximum number of concurrent connections to a database.

2047

2047

Maximum number of concurrent client connections to a TimesTen instance
Note: Some instances may support a slightly smaller maximum number of connections depending on such things as whether the database is shared or replicated and operating system limits. Most configurations support no less than 2,000 connections.

25,000

25,000

Maximum length of database names.

32

32

Maximum length of the path name for a database in an asynchronous writethrough cache group

248

248

Maximum number of projected expressions in a SELECT statement.

32,767

32,767

Maximum length of string specifying a join order.

1,024

1,024

Maximum number of columns in an index (or primary) key.

16

16

Maximum length of basic names.

30

30

Maximum length of displayed predicate string in the SYS.PLAN table.

1,024

1,024

Maximum length of SQL statement, including the NULL terminator.

409,600

409,600

Maximum number of table references in an SQL query.

24

24

Maximum number of indexes on a table.

500

500

Maximum number of partitions in a table

999

999

Maximum number of prepared PL/SQL statements per connection

5000

5000

Maximum number of recently-used PL/SQL blocks that can be cached per session

5000

5000

Maximum number of concurrent shared memory segment client/server connections per TimesTen instance.

512

512

Maximum size of IPC shared memory segment for client/server connections

1 gigabyte

1 gigabyte

Maximum number of allocated statement handles per shared memory segment client/server connection.

512

512

Maximum depth of nesting subqueries.

Equal to the maximum number of table references in a SQL query.

Equal to the maximum number of table references in a SQL query.

Maximum error message length for applications that specify an error message length, for example through a call to SQLError.

512

512

Limits on number of open files

Each process connected to a TimesTen database keeps at least one operating-system file descriptor open from the time of the first connection until the process terminates. Additional file descriptors may be opened for each database connection:

- Connections to databases that have logging to disk enabled require an additional two file descriptors for the duration of the connection.

- An additional file descriptor is needed for the duration of database checkpoints issued by the process.

- Additional file descriptors may be opened during transaction commit or rollback operations.

For multithreaded applications that maintain many concurrent TimesTen database connections, the default number of open files permitted to each process by the operating system may be too low.

- On Solaris, the default limit is 256 open files and may be raised for a session with the ulimit command (limit for csh users). You can also set the per-process limit programmatically with setrlimit.

- On AIX, the limit is 2,048 open files, so you are not likely to encounter problems.

- On Linux, the default limit is 1,024 open files, so you are not likely to encounter problems.

- On Windows, the default limit is at least 2,000 open files, so you are not likely to encounter problems.

Most of the open file descriptors are used for reading and writing database recovery log files. If a process fails to open a log file, the database is marked as requiring recovery and all current connections to the database are terminated.

Path names

TimesTen does not support file path names that contain multibyte characters. Make sure that the installation path, database path, transaction log path, and temporary file path do not contain any multibyte characters.

Index

A  B  C  D  E  F  G  H  I  J  L  M  N  O  P  Q  R  S  T  U  V  W  X

A

Access Control

Authenticate, 1.2

DSN attributes, 1.1

ttAgingLRUConfig, 2

ttAgingScheduleNow, 2

ttApplicationContext, 2

ttBackupStatus, 2

ttBookmark, 2

ttCacheAdvisor, 3.2.2

ttCacheAutorefreshStatsGet, 2, 2

ttCacheAwtThresholdSet, 2

ttCacheConfig, 2

ttCacheDBCgStatus, 2

ttCachePolicyGet, 2

ttCachePolicySet, 2

ttCachePropagateFlagSet, 2

ttCacheSqlGet, 2

ttCacheStart, 2

ttCacheStop, 2

ttCacheUidGet, 2

ttCacheUidPwdSet, 2

ttCapture, 3.2.2

ttCkpt, 2

ttCkptBlocking, 2

ttCompact, 2

ttCompactTS, 2

ttComputeTabSizes, 2

ttConfiguration, 2

ttContext, 2

ttDaemonAdmin, 3.2.2

ttDataStoreStatus, 2

ttDurableCommit, 2

ttGridAttach, 2, 2, 2, 2

ttGridCheckOwner, 2

ttGridCreate, 2, 2

ttGridDestroy, 2, 2

ttGridDetach, 2, 2

ttGridDetachAll, 2, 2, 2

ttGridDetachList, 2

ttGridGlobalCGResume, 2

ttGridGlobalCGSuspend, 2, 2, 2

ttGridInfo, 2, 2

ttGridNameSet, 2, 2

ttGridNodeStatus, 2, 2

ttHostGridCheckOwner, 2

ttHostNameGet, 2, 2

ttHostNameSet, 2, 2

ttLoadFromOracle, 2

ttLockLevel, 2

ttLockWait, 2

ttLogHolds, 2

ttmodinstall, 3.2.2

ttMonitorHighWaterReset, 2

ttOptClearStats, 2, 2

ttOptEstimateStats, 2

ttOptGetColStats, 2

ttOptGetFlag, 2

ttOptGetMaxCmdFreeListCnt, 2

ttOptGetOrder, 2

ttOptJoinOrder, 2

ttOptSetColIntvlStats, 2

ttOptSetColStats, 2

ttOptSetFlag, 2

ttOptSetMaxCmdFreeListCnt, 2

ttOptSetMaxPriCmdFreeListCnt, 2

ttOptSetOrder, 2

ttOptSetTblStats, 2

ttOptStatsExport, 2

ttOptUpdateStats, 2

ttOptUseIndex, 2

ttPLSQLMemoryStats, 2

ttRamPolicyGet, 2, 2

ttRamPolicySet, 2, 2

ttRedundantIndexCheck, 2

ttRepAdmin, 3.2.2

ttRepDeactivate, 2

ttReplicationStatus, 2

ttRepPolicyGet, 2

ttRepPolicySet, 2

ttRepQueryThresholdGet, 2

ttRepQueryThresholdSet, 2

ttRepStart, 2

ttRepStateGet, 2

ttRepStateSave, 2

ttRepStateSet, 2

ttRepStop, 2

ttRepSubscriberStateSet, 2

ttRepSubscriberWait, 2

ttRepSyncGet, 2

ttRepSyncSet, 2

ttRepSyncSubscriberStatus, 2

ttRepTransmitGet, 2

ttRepXactStatus, 2

ttRepXactTokenGet, 2

ttSetUserColumnID, 2

ttSetUserTableID, 2

ttSize, 2

ttSQLCmdCacheInfo, 2

ttSQLCmdQueryPlan, 2, 2

ttTableSchemaFromOraQueryGet, 2

ttUserPrivileges, 2

ttWarnOnLowMemory, 2, 2

ttXactAdmin, 3.2.2

ttXactIdGet, 2

ttXlaBookmarkCreate, 2

ttXlaBookmarkDelete, 2

ttXlaSubscribe, 2

ttXlaUnsubscribe, 2

utilities, 3.2.1

access modes, conflicting, 1.2 AllFlags optimizer flag, 2 allocated statement handles

maximum number, 4.1

allocating disk space

first connection attributes

Preallocate, 1.2, 1.2

altering plan generation, 2, 2 ASCII files and ttBulkCp, 3.2.2 attributes

access control, 1.1

AutoCreate, 1.2

CacheAWTMethod, 1.2

CacheAWTParallelism, 1.2

CacheGridEnable, 1.2

CacheGridMsgWait, 1.2

CkptFrequency, 1.2

CkptLogVolume, 1.2

CkptRate, 1.2

ConnectionCharacterSet, 1.2

ConnectionName, 1.2

Connections, 1.2

Data Source Name, 1.2

DatabaseCharacterSet, 1.2

DataStore, 1.2

DDLCommitBehavior, 1.2, 1.2, 1.2

Description, 1.2

Diagnostics, 1.2

DuplicateBindMode, 1.2

DurableCommits, 1.2

DynamicLoadEnable, 1.2

DynamicLoadErrorMode, 1.2

ForceConnect, 1.2

Isolation, 1.2

LockLevel, 1.2

LockWait, 1.2

LogAutoTruncate, 1.2

LogBuffMB, 1.2

LogBufParallelism, 1.2

LogDir, 1.2

LogFileSize, 1.2

LogFlushMethod, 1.2

LogPurge, 1.2

MatchLogOpts, 1.2

MaxConnsPerServer, 1.2

MemoryLock, 1.2

NLS_LENGTH_SEMANTICS, 1.2

NLS_NCHAR_CONV_EXCP, 1.2

NLS_SORT, 1.2

OracleNetServiceName, 1.2

OraclePWD, 1.2

Overwrite, 1.2

PassThrough, 1.2

PermSize, 1.2

PermWarnThreshold, 1.2

PLSCOPE_SETTINGS, 1.2

PLSQL, 1.2

PLSQL_CCFLAGS, 1.2

PLSQL_MEMORY_ADDRESS, 1.2, 1.2

PLSQL_MEMORY_SIZE, 1.2

PLSQL_OPTIMIZE_LEVEL, 1.2

PLSQL_TIMEOUT, 1.2

Preallocate, 1.2

PrivateCommands, 1.2

PWD, 1.2

PWDCrypt, 1.2

QueryThreshold, 1.2

RACCallback, 1.2

ReceiverThreads, 1.2

RecoveryThreads, 1.2

ReplicationApplyOrdering, 1.2, 1.2

ReplicationParallelism, 1.2, 1.2

ReplicationTrack, 1.2

ServersPerDSN, 1.2

ServerStackSize, 1.2

SQLQueryTimeout, 1.2

TCP_Port, 1.2

TCP_Port2, 1.2

Temporary, 1.2

TempSize, 1.2

TempWarnThreshold, 1.2

TTC_FailoverPortRange, 1.2

TTC_Server, 1.2

TTC_Server_DSN, 1.2

TTC_Server_DSN2, 1.2

TTC_Server2, 1.2

TTC_Timeout, 1.2

TypeMode, 1.2

UID, 1.2

WaitForConnect, 1.2

autocommit, 2 AutoCreate attribute, 1.2 AWT cache group

maximum length of path name for database, 4.1

B

backups, 3.2.2

BranchandBound optimizer flag, 2

built-in procedure

ttIndexAdviceCaptureDrop, 2

ttIndexAdviceCaptureEnd, 2

ttIndexAdviceCaptureInfoGet, 2

ttIndexAdviceCaptureOutput, 2

ttIndexAdviceCaptureStart, 2

built-in procedures

ttAgingLRUConfig, 2

ttAgingScheduleNow, 2

ttApplicationContex, 2

ttApplicationContext, 2

ttBookmark, 2

ttCacheAWTMonitorConfig, 2

ttCacheAwtThresholdGet, 2

ttCacheAWTThresholdSet, 2

ttCacheConfig, 2

ttCacheDbCgStatus, 2

ttCachePolicyGet, 2

ttCachePolicySet, 2

ttCachePropagateFlagSet, 2

ttCacheSqlGet, 2

ttCacheStart, 2

ttCacheStop, 2

ttCacheUidPwdSet, 2

ttCkpt, 2, 2

ttCkptBlocking, 2

ttCkptConfig, 2

ttCkptHistory, 2

ttCompact, 2

ttCompactTS, 2

ttConfiguration, 2

ttContext, 2

ttDataStoreStatus, 2

ttDurableCommit, 2

ttGridAttach, 2, 2

ttGridCheckOwner, 2

ttGridCreate, 2

ttGridDestroy, 2

ttGridDetach, 2

ttGridDetachAll, 2

ttGridGlobalCGSuspend, 2

ttGridInfo, 2

ttGridNameSet, 2

ttGridNodeStatus, 2

ttHostNameGet, 2

ttHostNameSet, 2

ttIndexAdviceCaptureDrop, 2

ttLoadFromOracle, 2

ttLockLevel, 2

ttLockWait, 2

ttLogHolds, 2

ttOptClearStats, 2, 2

ttOptEstimateStats, 2

ttOptGetColStats, 2

ttOptGetFlag, 2

ttOptGetMaxCmdFreeListCnt, 2

ttOptGetOrder, 2

ttOptSetColIntvlStats, 2

ttOptSetFlag, 2

ttOptSetMaxCmdFreeListCnt, 2

ttOptSetMaxPriCmdFreeListCnt, 2

ttOptSetOrder, 2

ttOptSetTblStats, 2

ttOptShowJoinOrder, 2

ttOptStatsExport, 2

ttOptUpdateStats, 2

ttOptUseIndex, 2

ttPLSQLMemoryStats, 2

ttRamPolicyGet, 2, 2

ttRamPolicySet, 2, 2

ttRedundantIndexCheck, 2

ttRepDeactivate, 2

ttReplicationStatus, 2

ttRepPolicyGet, 2

ttRepPolicySet, 2

ttRepQueryThresholdGet, 2

ttRepQueryThresholdSet, 2

ttRepStart, 2

ttRepStateSet, 2

ttRepStop, 2

ttRepSubscriberStateSet, 2

ttRepSubscriberStatus, 2

ttRepSubscriberWait, 2

ttRepSyncGet, 2

ttRepSyncSet, 2

ttRepTransmitGet, 2

ttRepTransmitSet, 2

ttRepXactStatus, 2

ttRepXactTokenGet, 2

ttSetUserColumnID, 2

ttSetUserTableID, 2, 2

ttSize, 2

ttTableSchemaFromOraQueryGet, 2

ttVersion, 2

ttWarnOnLowMemory, 2

ttXactIdGet transaction ID

displaying, 2

ttXlaBookmarkCreate, 2 ttXlaBookmarkDelete, 2 ttXlaSubscribe, 2 bulk copy, 3.2.2

C

cache agent

ttCacheConfig procedure, 2

ttCacheDbCgStatus procedure, 2

ttCachePolicyGet procedure, 2

ttCachePolicySet procedure, 2

CacheAWTMethod attribute, 1.2 CacheAWTParallelism attribute, 1.2 CacheGridEnable attribute, 1.2 CacheGridMsgWait attribute, 1.2 caching Oracle data

ttCacheAgingIntervalSet procedure, 2

ttCacheConfig procedure, 2

ttCacheDbCgStatus procedure, 2

ttCachePolicyGet procedure, 2

ttCachePolicySet procedure, 2

ttCachePropagateFlagSet procedure, 2

ttCacheSqlGet procedure, 2

ttCacheStart procedure, 2

ttCacheStop procedure, 2

ttCacheUidPwdSet procedure, 2

CallableStatement

example, 2

changing lock level, 2 checkpoints, 2

ttCkpt, 2

ttCkptBlocking, 2, 2

ttCkptConfig, 2

ttCkptHistory, 2, 2

CkptFrequency attribute, 1.2 CkptLogVolume attribute, 1.2 CkptRate attribute, 1.2 clearing statistics, 2, 2 Client connection attributes

TCP_Port, 1.2

TCP_Port2, 1.2

TTC_FailoverPortRange, 1.2

TTC_Server, 1.2

TTC_Server_DSN, 1.2

TTC_Server_DSN2, 1.2

TTC_Server2, 1.2

TTC_Timeout, 1.2

UID/PWD, 1.2

client/server connections

maximum, 4.1, 4.1

COL_STATS system table

updating explicitly, 2

columns

fixed-length maximum, 4.1

maximum in GROUP BY clause, 4.1

maximum in ORDER BY clause, 4.1

maximum number in index, 4.1

maximum per table, 4.1

replication, maximum length, 4.1

varying-length maximum, 4.1

compacting database, 2 concurrency, 1.2 concurrent connections

maximum, 4.1, 4.1

conflicting access modes, 1.2 connection attribute

DynamicLoadEnable, 1.2

connection failure and MatchLogOpts, 1.2 ConnectionCharacterSet attribute, 1.2 ConnectionName attribute, 1.2 Connections attribute, 1.2 consistency checking, 3.2.2 Correlation Name

definition, 2

createandloadfromoraquery, 3.2.2 creating databases

AutoCreate attribute, 1.2

Overwrite attribute, 1.2

PermSize attribute, 1.2

Preallocate attribute, 1.2

RecoveryThreads attribute, 1.2

TempSize attribute, 1.2

cumulative length of columns, 4.1

D

Data Source Name attribute, 1.2

data store

attributes, 1.2

Data Source Name attribute, 1.2

DatabaseCharacterSet attribute, 1.2

DataStore attribute, 1.2

Description attribute, 1.2

LogDir attribute, 1.2

Preallocate attribute, 1.2

ReplicationApplyOrdering attribute, 1.2

ReplicationParallelism, 1.2

Temporary attribute, 1.2

TypeMode, 1.2

database

AutoCreate attribute, 1.2

backups, 3.2.2

calling ttCompact, 2

calling ttCompactTS, 2

compacting, 2

creating, 1.2

database-level locking, 1.2

destroying, 3.2.2

estimating size, 2, 3.2.2

ForceConnect attribute, 1.2

LockLevel attribute, 1.2

LogAutoTruncate attribute, 1.2

LogFlushMethod attribute, 1.2

LogPurge attribute, 1.2

MatchLogOpts attribute, 1.2

maximum length of name, 4.1

Overwrite attribute, 1.2

PermSize attribute, 1.2

PermWarnThreshold attribute, 1.2

PrivateCommands attribute, 1.2

PWDCrypt attribute, 1.2

QueryThreshold attribute, 1.2

ReplicationApplyOrdering attribute, 1.2

restoring, 3.2.2

status, 2

TempSize attribute, 1.2

TempWarnThreshold attribute, 1.2

WaitForConnect attribute, 1.2

database size

minimum, 4.1

DatabaseCharacterSet attribute, 1.2 database-level locking

ttLockLevel procedure, 2

DataStore attribute, 1.2 data-store-level locking

attribute, 1.2, 1.2, 1.2

different levels of locking, 1.2

DDLCommitBehavior attribute, 1.2, 1.2, 1.2 Default optimizer flag, 2 deleting database, 3.2.2 depth of nesting subqueries maximum, 4.1 Description attribute, 1.2 destroying database, 3.2.2 Diagnostics attribute, 1.2 displayed predicate maximum length, 4.1 displaying the TimesTen Version, 3.2.2, 3.2.2 displaying transaction ID, 2 displaying transaction log, 3.2.2 DuplicateBindMode attribute, 1.2, 1.2 durable commits

ttDurableCommit procedure, 2

DurableCommits attribute, 1.2, 1.2 DynamicLoadEnable connection attribute, 1.2 DynamicLoadEnable optimizer flag, 2 DynamicLoadErrorMode attribute, 1.2 DynamicLoadErrorMode optimizer flag, 2

E

eliminating fragmentation, 2

error message maximum length, 4.1

estimating statistics, 2

estimating table size, 2, 3.2.2

expressions in SELECT statement maximum, 4.1

F

Firs tRow optimizer flag, 2

first connection attributes

AutoCreate, 1.2

LogPurge, 1.2

Overwrite, 1.2

PermSize, 1.2

TempSize, 1.2

fixed-length column

maximum length, 4.1, 4.1

ForceCompile optimizer flag, 2 ForceConnect attribute, 1.2 fragmentation

eliminating with ttCompact, 2

eliminating with ttCompactTS, 2

G

general connection attributes

ConnectionCharacterSet, 1.2

ConnectionName, 1.2

description, 1.2

Diagnostics, 1.2

DurableCommits, 1.2

LockLevel, 1.2

LockWait, 1.2

MatchLogOpts, 1.2

PLSQL, 1.2

WaitForConnect, 1.2

GenPlan optimizer flag, 2 getting statistics, 2 GlobalProcessing optimizer flag, 2 GROUP BY

maximum number of columns, 4.1

H

Hash optimizer flag, 2

HashGb optimizer flag, 2

I

IF command, 3.2.2

Index Advisor

ttIndexAdviceCaptureDrop, 2, 2

ttIndexAdviceCaptureEnd, 2

ttIndexAdviceCaptureInfoGet, 2

ttIndexAdviceCaptureOutput, 2

ttIndexAdviceCaptureStart, 2

IndexedOR optimizer flag, 2 indexes

maximum number of columns, 4.1

maximum number on a table, 4.1

interactively running SQL, 3.2.2 internal consistency checking, 3.2.2 Isolation attribute, 1.2

J

join order

maximum string length, 4.1

L

length of basic names maximum, 4.1

Load From Oracle

ttIsql createandloadfromoraquery, 3.2.2, 3.2.2

Load from Oracle

ttLoadFromOracle, 2

ttTableSchemaFromOraQueryGet, 2

locked database, 1.2 locking

ttLockLevel procedure, 2

LockLevel attribute, 1.2 locks

changing level, 2

ttLockLevel procedure, 2

LockWait attribute, 1.2 log buffer size

and logging to disk, 1.2

attribute, 1.2

log file size

and logging, 1.2

attribute, 1.2

log files

purging, 1.2

LogAutoTruncate attribute, 1.2 LogBuffSize attribute, 1.2, 1.2 LogBufParallelism attribute, 1.2 LogDir attribute, 1.2 LogFileSize attribute, 1.2 LogFlushMethod attribute, 1.2 LogPurge attribute, 1.2

and MatchLogOpts, 1.2

description, 1.2

logs

transaction log, 3.2.2

M

MatchLogOpts attribute, 1.2

MaxConnsPerServer attribute, 1.2

maximum

client/server timeout period, 1.2

columns in index, 4.1

columns per table, 4.1, 4.1

concurrent connections, 4.1, 4.1

cumulative length of columns, 4.1

depth of nesting subqueries, 4.1

error message length, 4.1

expressions in SELECT statement, 4.1

fixed-length column, 4.1

indexes per table, 4.1

join order string length, 4.1

length of database name, 4.1

length of displayed predicate, 4.1

length of names, 4.1

length of path name for database in AWT cache group, 4.1

length of SQL statement, 4.1

number of subscriber databases, 4.1

prepared PL/SQL statements per connection, 4.1

recently used PL/SQL blocks cached per session, 4.1

rows per table, 4.1

table partitions, 4.1

table references in query, 4.1

varying-length columns, 4.1

maximum columns

GROUP BY, 4.1

ORDER BY, 4.1

maximum length, 4.1 memory

usage policy, 3.2.2

MemoryLock attribute, 1.2 migrating databases

ttMigrate utility, 3.2.2

minimum database size, 4.1 modifying column statistics explicitly, 2, 2 modifying table statistics explicitly, 2

N

NestedLoop optimizer flag, 2, 2

NLS general connection attributes, 1.2

NLS_LENGTH_SEMANTICS attribute, 1.2

NLS_NCHAR_CONV_EXCP attribute, 1.2

NLS_SORT attribute, 1.2

NoRemRowIdOpt optimizer flag, 2

O

open files, maximum number, 4.2

optimizer flag

settings, 2

ttOptGetFlag procedure, 2

optimizer flags

AllFlags, 2

Default, 2

FirstRow, 2

GenPlan, 2

GlobalProcessing, 2

Hash, 2

HashGb, 2

NestedLoop, 2, 2

PassThrough, 2

Range, 2

Rowid, 2

RowLock, 2, 2

Scan, 2

TblLock, 2, 2

TmpHash, 2

TmpRange, 2

TmpTable, 2

OracelNetServiceName attribute, 1.2 Oracle Agent

ttCacheStart procedure, 2

ttCacheStop procedure, 2

Oracle Connect

ttCacheAgingIntervalSet procedure, 2

ttCachePropagateFlagSet procedure, 2

ttCacheSqlGet procedure, 2

ttCacheUidPwdSet procedure, 2

OraclePWD attribute, 1.2, 1.2 ORDER BY

maximum number of columns, 4.1

out-of memory warnings, 1.2, 1.2 Overwrite attribute, 1.2

P

parallel replication, 1.2

PassThrough attribute, 1.2

PassThrough optimizer flag, 2

path names, 4.3

PermSize attribute, 1.2

PermWarnThreshold attribute, 1.2

plan generation

altering, 2, 2

PLSCOPE_SETTINGS attribute, 1.2 PLSQL attribute, 1.2 PL/SQL first connection attributes, 1.2 PLSQL_CCFLAGS attribute, 1.2 PLSQL_MEMORY_ADDRESS attribute, 1.2, 1.2 PLSQL_MEMORY_SIZE attribute, 1.2 PLSQL_OPTIMIZE_LEVEL attribute, 1.2 PLSQL_TIMEOUT attribute, 1.2 Preallocate attribute, 1.2 prepared PL/SQL statements per connection

maximum, 4.1

PrivateCommands attribute, 1.2 propagator databases

maximum number, 4.1

purging log files, 1.2 PWD, 1.2 PWD attribute, 1.2 PWDCrypt, 3.2.2 PWDCrypt attribute, 1.2

Q

QueryThreshold attribute, 1.2

R

RACCallback attribute, 1.2

RAM

usage policy, 3.2.2

RAM policy

ttAdmin, 3.2.2

ramPolicy, 3.2.2 Range optimizer flag, 2 read-only isolation mode, 1.2 ReceiverThreads attribute, 1.2

attributes

ReceiverThreads, 1.2

recently-used PL/SQL blocks cached per session

maximum, 4.1

RecoveryThreads attribute, 1.2, 1.2 removing database, 3.2.2 replicated column, 4.1 replication

ttRepSubscriberStateSet procedure, 2

ttRepSubscriberWait procedure, 2

ttRepSyncGet, 2

ttRepSyncSet, 2

Replication Agent

ttReplicationStatus procedure, 2

ttRepPolicyGet procedure, 2

ttRepPolicySet procedure, 2

ttRepQueryThresholdGet procedure, 2

ttRepQueryThresholdSet procedure, 2

ttRepStart procedure, 2

ttRepStateSet procedure, 2

ttRepStop procedure, 2

ttRepSubscriberStatus procedure, 2

ttRepXactStatus procedure, 2

ttRepXactTokenGet procedure, 2

ReplicationApplyOrdering attribute, 1.2, 1.2 ReplicationParallelism attribute, 1.2, 1.2 ReplicationTrack attribute, 1.2 RepStateGet, 2 restoring databases, 3.2.2 row

maximum length, 4.1

Rowid optimizer flag, 2 row-level locking

attribute setting, 1.2, 1.2

optimizer flag, 2, 2

rows

maximum per table, 4.1

running SQL interactively, 3.2.2

S

Scan optimizer flag, 2

serializable isolation mode, 1.2

ServersPerDSN attribute, 1.2

ServerStackSize attribute, 1.2

ShowJoinOrder optimizer flag, 2

sizing databases, 2, 3.2.2

SQL statement

maximum length, 4.1

SQL, running interactively, 3.2.2 SQLExecDirect

example, 2

SQLQueryTimeout attribute, 1.2 statistics

clearing, 2, 2

estimating, 2

getting, 2

modifying explicitly (column), 2, 2

modifying explicitly (table), 2

ttOptClearStats procedure, 2, 2

ttOptEstimateStats procedure, 2

ttOptGetColStats procedure, 2

updating explicitly, 2

subscriber databases

maximum number, 4.1

maximum number in active standby pair, 4.1

syslog, 3.2.2

T

table partitions maximum, 4.1

table references

maximum number in SQL query, 4.1

table size

estimating, 2, 3.2.2

tables

ttBulkCp, 3.2.2

TBL_STATS system table

updating explicitly, 2

TblLock optimizer flag, 2, 2 TCP_Port, 1.2, 1.2, 1.2, 1.2 TCP_Port attribute, 1.2 TCP_Port2 attribute, 1.2 Temporary attribute, 1.2 temporary database, 1.2 TempSize attribute, 1.2 TempWarnThreshold attribute, 1.2 TimesTen Version

displaying, 3.2.2, 3.2.2

TmpHash optimizer flag, 2 TmpRange optimizer flag, 2 TmpTable optimizer flag, 2 trace information display, 3.2.2 tracing

disabling, 3.2.2

enabling, 3.2.2

options, 3.2.2

transaction commit

and DurableCommits attribute, 1.2

transaction log, 3.2.2 transaction log API

ttSetUserColumnID procedure, 2

ttSetUserTableID procedure, 2

ttAdmin, 3.2.2 ttAgingLRUConfig, 2 ttAgingScheduleNow, 2 ttApplicationContext, 2, 2 ttBackup, 3.2.2 ttBookmark, 2, 2 ttBulkCp, 3.2.2, 3.2.2 TTC_FailoverPortRange, 1.2 TTC_FailoverPortRange attribute, 1.2 TTC_Server, 1.2 TTC_Server attribute, 1.2 TTC_Server_DSN, 1.2 TTC_Server_DSN attribute, 1.2 TTC_Server_DSN2, 1.2 TTC_Server_DSN2 attribute, 1.2 TTC_Server2, 1.2 TTC_Server2 attribute, 1.2 TTC_Timeout, 1.2 TTC_Timeout attribute, 1.2 ttCacheAdvisor, 3.2.2 ttCacheAgingIntervalSet, 2 ttCacheAutorefreshStatsGet, 2, 2, 2, 2, 2 ttCacheAwtMonitorConfig, 2 ttCacheAwtThresholdGet, 2 ttCacheAWTThresholdSet, 2 ttCacheConfig, 2 ttCacheDbCgStatus, 2 ttCachePolicyGet, 2 ttCachePolicySet, 2 ttCachePropagateFlagSet, 2, 2 ttCacheSqlGet, 2, 2 ttCacheStart, 2, 2 ttCacheStop, 2, 2 ttCacheUidGet, 2 ttCacheUidPwdSet, 2, 2, 2 ttCapture, 3.2.2 ttCheck, 3.2.2 ttCkpt, 2, 2, 2 ttCkptBlocking, 2, 2 ttCkptConfig, 2 ttCkptHistory, 2, 2 ttCompact, 2, 2 ttCompactTS, 2, 2 ttComputeTabSizes, 2 ttConfiguration, 2 ttContext, 2, 2 ttCWAdmin, 3.2.2 ttDaemonAdmin, 3.2.2 ttDaemonLog, 3.2.2 ttDataStoreStatus, 2, 2 ttDestroy, 3.2.2 ttDurableCommit, 2, 2 ttGridAttach, 2 ttGridCGGlobalResume, 2 ttGridcheckOwner, 2 ttGridCreate, 2 ttGridDestroy, 2 ttGridDetach, 2 ttGridDetachAll, 2 ttGridDetachList, 2 ttGridGlobalCGSuspend, 2 ttGridInfo, 2 ttGridNameSet, 2 ttGridNodeStatus, 2 ttHostNameGet, 2 ttHostNameSet, 2, 2 ttIndexAdviceCaptureDrop, 2, 2 ttIndexAdviceCaptureEnd, 2 ttIndexAdviceCaptureInfoGet, 2 ttIndexAdviceCaptureOutput, 2 ttIndexAdviceCaptureStart, 2 ttIsql, 3.2.2

error recovery, 3.2.2

IF command, 3.2.2

WHENEVER SQLERROR, 3.2.2

ttLoadFromOracle, 2 ttLockLevel, 2, 2 ttLockWait, 2, 2 ttLogHolds, 2, 2 ttMigrate, 3.2.2 ttmodinstall, 3.2.2 ttOptClearStats, 2, 2, 2 ttOptCmdCacheInvalidate, 2 ttOptEstimateStats, 2, 2 ttOptGetColStats, 2, 2 ttOptGetFlag, 2, 2 ttOptGetMaxCmdFreeListCnt, 2 ttOptGetOrder, 2 ttOptSetColIntvlStats, 2 ttOptSetFlag, 2 ttOptSetMaxCmdFreeListCnt, 2 ttOptSetMaxPriCmdFreeListCnt, 2 ttOptSetOrder, 2 ttOptSetTblStats, 2 ttOptShowJoinOrder, 2 ttOptStatsExport, 2 ttOptUpdateStats, 2 ttOptUseIndex, 2 ttPLSQLMemoryStats, 2 ttRamPolicyGet, 2, 2 ttRamPolicySet, 2, 2 ttRedundantIndexCheck, 2 ttRepAdmin, 3.2.2 ttRepDeactivate, 2 ttReplicationStatus, 2 ttRepPolicyGet, 2 ttRepPolicySet, 2 ttRepQueryThresholdGet, 2 ttRepQueryThresholdSet, 2 ttRepStart, 2 ttRepStateSet, 2 ttRepStateStore, 2 ttRepStop, 2 ttRepSubscriberStateSet, 2 ttRepSubscriberStatus, 2 ttRepSubscriberWait, 2 ttRepSyncGet, 2, 2, 2 ttRepSyncSet, 2, 2 ttRepSyncSubscriberStatus, 2 ttRepTransmitGet, 2, 2 ttRepTransmitSet, 2, 2 ttRepXactStatus, 2 ttRepXactTokenGet, 2 ttRestore, 3.2.2 ttSchema, 3.2.2 ttSetUserColumnID, 2, 2 ttSetUserTableID, 2, 2, 2 ttSize, 2, 3.2.2 ttSQLCmdCacheInfo, 2 ttSQLCmdCacheInfoGet, 2 ttSQLCmdQueryPlan, 2 ttStatus, 3.2.2 ttSyslogCheck, 3.2.2 ttTableSchemaFromOraQueryGet, 2 ttTail, 3.2.2 ttTraceMon, 3.2.2 ttUser, 1.2 ttuser, 3.2.2 ttVersion, 2, 2, 3.2.2, 3.2.2 ttWarnOnLowMemory, 2, 2 ttXactAdmin, 3.2.2 ttXactIdGet, 2 ttXactLog, 3.2.2 ttXlaBookmarkCreate, 2 ttXlaBookmarkDelete, 2 ttXlaSubscribe, 2 ttXlaUnsubscribe, 2 TypeMode attribute, 1.2

U

UID, 1.2

UID attribute, 1.2

updating statistics explicitly, 2

UseBoyerMooreStringSearch optimizer flag, 2

user table ID

definition, 2

utilities

access control, 3.2.1

authentication, 3.2.1

privileges, 3.2.1

ttAdmin, 3.2.2

ttBackup, 3.2.2

ttBulkCp, 3.2.2, 3.2.2

ttCacheAdvisor, 3.2.2

ttCapture, 3.2.2

ttCheck, 3.2.2

ttCWAdmin, 3.2.2

ttDaemonAdmin, 3.2.2

ttDestroy, 3.2.2

ttIsql, 3.2.2

ttMigrate, 3.2.2

ttmodinstall, 3.2.2

ttRepAdmin, 3.2.2

ttRestore, 3.2.2

ttSchema, 3.2.2

ttSize, 3.2.2

ttStatus, 3.2.2

ttSyslogCheck, 3.2.2

ttTail, 3.2.2

ttTraceMon, 3.2.2

ttVersion, 3.2.2, 3.2.2

ttXactAdmin, 3.2.2

ttXactLog, 3.2.2

V

varying-length column

maximum length, 4.1, 4.1

W

WaitForConnect attribute, 1.2

WHENEVER SQLERROR command, 3.2.2

X

XLA

bookmark, deleting, 3.2.2

xlabookmarkdelete command

ttIsql utility, 3.2.2

Copyright © 2012, Oracle and/or its affiliates. All rights reserved.